scholarly journals Critical Analysis of Fibre-Reinforced Polymer Near-Surface Mounted Double-shear Pull-out Tests

Strain ◽  
2013 ◽  
Vol 49 (4) ◽  
pp. 299-312 ◽  
Author(s):  
I. Costa ◽  
J. Barros
Keyword(s):  
Critical Analysis ◽  
Near Surface ◽  
Double Shear ◽  
Pull Out ◽  
Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Near Surface Mounted

scholarly journals Characterization and Simulation of the Bond Response of NSM FRP Reinforcement in Concrete

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1770 ◽  
Author(s):  
Javier Gómez ◽  
Lluís Torres ◽  
Cristina Barris
Keyword(s):  
Load Capacity ◽  
Numerical Procedure ◽  
Fiber Reinforced Polymer ◽  
Near Surface ◽  
Bond Slip ◽  
Pull Out ◽  
Reinforced Polymer ◽  
Frp Reinforcement ◽  
Near Surface Mounted ◽  
Shear Stress And Strain

The near-surface mounted (NSM) technique with fiber reinforced polymer (FRP) reinforcement as strengthening system for concrete structures has been broadly studied during the last years. The efficiency of the NSM FRP-to-concrete joint highly depends on the bond between both materials, which is characterized by a local bond–slip law. This paper studies the effect of the shape of the local bond–slip law and its parameters on the global response of the NSM FRP joint in terms of load capacity, effective bond length, slip, shear stress, and strain distribution along the bonded length, which are essential parameters on the strengthening design. A numerical procedure based on the finite difference method to solve the governing equations of the FRP-to-concrete joint is developed. Pull-out single shear specimens are tested in order to experimentally validate the numerical results. Finally, a parametric study is performed. The effect of the bond–shear strength slip at the bond strength, maximum slip, and friction branch on the parameters previously described is presented and discussed.

COMPARATIVE STUDY ON THEORETICAL MODELS AND DESIGN CODES FOR THE SHEAR CONTRIBUTION OF NSM FRP BARS IN RC BEAMS

2016 ◽  
Vol 78 (5) ◽  
Author(s):  
Abdul Aziz Abdul Samad ◽  
Noridah Mohamad ◽  
Josef Hadipramana ◽  
Mohamad Razi Ashaari Amiruddin
Keyword(s):  
Comparative Study ◽  
Theoretical Models ◽  
Design Codes ◽  
Rc Beams ◽  
Near Surface ◽  
Reinforced Polymer ◽  
Close Observation ◽  
Fibre Reinforced Polymer ◽  
Near Surface Mounted ◽  
Experimental Findings

This paper presents a comparative study on various theoretical models and design codes for the shear contribution of Near-Surface Mounted (NSM) using Fibre Reinforced Polymer bars to reinforced concrete (RC) beams. Theoretical models from De Lorenzis and A. Nanni, Anwarul Islam and Diaz and Barros, and ACI440.1R-06 and CSA-S806 design codes were selected. All the equations were compared by integrating experimental parameters from Rizzo and De Lorenzis, and Cisneros D. et al. From analysis, it was observed that the theoretical models shows substantial differences by underestimating the experimental findings of Rizzo and De Lorenzis from -68% to -38%. Similarly with Cisneros experimental work, the three theoretical models also produces large differences ranging from -73% to +41%. The analysis from the two design codes from ACI440.1R-06 and CSA-S806 also resulted with both design codes having significant differences ranging from -60% to +48%. However, from close observation, Dias and Barros theoretical model showed more accuracy by having a difference of just -4% with ACI440.1R-06 design code giving a much higher but acceptable difference of +26% compared to CSA-S806 at -60%. 

Analysis of Columns Strengthened using Fibre Reinforced Cementitious Matrix Jackets

2021 ◽  
Vol 9 (9) ◽  
pp. 1795-1800
Author(s):  
Fathima Azad
Keyword(s):  
Steel Plates ◽  
Structural Elements ◽  
Near Surface ◽  
Rc Structures ◽  
Cementitious Matrix ◽  
Reinforced Polymer ◽  
Externally Bonded ◽  
Fibre Reinforced Polymer ◽  
Near Surface Mounted ◽  
Strengthening Technique

Abstract: Maintenance, repair and strengthening of existing concrete structures, either reinforced or prestressed,are important activities of civil engineers. Nowadays different techniques are available for the strengthening. Various techniques were adopted for strengthening RC structures, namely, steel plates, external post tensioning, externally bonded Fibre-Reinforced Polymer (FRP), and near- surface-mounted FRP systems to increase shear and flexural capacity. During the last few decades, strengthening of concrete structural elements by fibre-reinforced polymer has become a widely used technique. But it has several disadvantages due to the epoxy resin like debonding of FRP from the concrete structure, unstable nature of the epoxy at higher temperatures etc. To overcome this, an upgraded system was introduced as an alternative for FRP known as Fibre Reinforced Cementitious Matrices (FRCM). The objective of this paper is to investigate the feasibility of Fibre-Reinforced Cementitious-Matrix materials as an alternative external strengthening technique for RC members. Columns with circular geometry were wrapped with different fibre materials using cementitious matrix. The analysis was done using ANSYS software. Keywords: RC columns, FRCM, Strengthening, fibre, ANSYS

Blast Testing of RC Slabs Retrofitted with NSM CFRP Plates

2007 ◽  
Vol 10 (4) ◽  
pp. 397-414 ◽  
Author(s):  
Chengqing Wu ◽  
Deric John Oehlers ◽  
John Wachl ◽  
Craig Glynn ◽  
Adrian Spencer ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Charge Weight ◽  
Future Research ◽  
Near Surface ◽  
Reinforced Polymer ◽  
Blast Testing ◽  
Carbon Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Near Surface Mounted ◽  
Rc Slabs

In this paper, blast testing was performed on two reinforced concrete specimens: a plain reinforced concrete (RC) specimen; and an identical RC specimen retrofitted with near surface mounted (NSM) carbon fibre reinforced polymer (CFRP) plates. Each specimen was subjected to two separate explosive loads at a standoff distance of 0.6m, with the aim of investigating the performances of both specimens within both their elastic and plastic response ranges. The first blast (Blast 1) and second blast (Blast 2) consisted of an equivalent TNT charge weight of 0.079kg and 2.09kg respectively. The elastic-range responses of both specimens after the small shot (Blast 1), such as acceleration and deflection were obtained and comparisons were made between the specimens. The plastic performances of both specimens, such as tension face scabbing, crack patterns, plastic hinges and permanent deflection, after the large shot (Blast 2) were also analysed and compared. A number of unique failures and behaviours of both specimens were observed, investigated and analyzed. The test results provide a vital direction in the development of an optimal retrofit in future research.

scholarly journals Comparative Investigation on Torsional Behaviour of RC Beam Strengthened with CFRP Fabric Wrapping and Near-Surface Mounted (NSM) Steel Bar

2019 ◽  
Vol 2019 ◽  
pp. 1-15 ◽  
Author(s):  
Nasih Askandar ◽  
Abdulkareem Mahmood
Keyword(s):  
Twist Angle ◽  
Bending Moment ◽  
Comparative Investigation ◽  
Rc Beams ◽  
Near Surface ◽  
Reinforced Polymer ◽  
Steel Bar ◽  
Fibre Reinforced Polymer ◽  
Near Surface Mounted ◽  
Cfrp Wrapping

Many researchers worldwide have extensively used fibre-reinforced polymer (FRP) strengthening materials and near-surface mounted (NSM) to enhance the shear and flexural strengths of reinforced concrete (RC) beams. However, studies on torsional strengthening are limited. Although a few studies have focused on torsional strengthening, none of them simultaneously investigated torsion with shear and/or bending moment. This study aims at demonstrating the behaviour of RC beams strengthened with FRP sheets (strips) with different configurations and NSM steel bars with different spacing that was subjected to combined actions of torsion and bending moment and making a comparison between them. Seven beams with a dimension of 15 × 25 × 200 cm were casted. One of the beams was not strengthened; three of them were strengthened with carbon FRP, and the others were strengthened with NSM steel bar. The angle of twist at torque intervals, first cracking torque, ultimate torque, and ultimate twist angle of the conventional and strengthened beams during the testing process are compared. Results show a significant improvement in the torsional performance of RC beams using carbon FRP and NSM steel bar. The test beams that were strengthened with CFRP wrapping showed better enhancement in the ultimate torsional moment as opposed to the beams that were strengthened with NSM steel bar.

Concrete cover separation of reinforced concrete beams strengthened with near-surface mounted method: Mechanics based design approach

2019 ◽  
Vol 22 (7) ◽  
pp. 1739-1754
Author(s):  
Ahmad Azim Shukri ◽  
Zainah Ibrahim ◽  
Huzaifa Hashim
Keyword(s):  
Reinforced Concrete ◽  
Carbon Fibre ◽  
Concrete Cover ◽  
Reinforced Concrete Beams ◽  
Near Surface ◽  
Reinforced Polymer ◽  
Carbon Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Near Surface Mounted ◽  
Concrete Cover Separation

The primary mode of premature failure for near-surface mounted strengthened beams is the concrete cover separation. Due to its complexity, most of the prediction methods for concrete cover separation tend to be empirical based, which can limit their usage to specific near-surface mounted strengthening configurations. In response to that, this article presents a mechanics-based design which uses the moment-rotation approach and the global energy balance approach which is less reliant on empirical formulations, as the mechanics of reinforced concrete beam such as tension stiffening and propagation of concrete cover separation debonding crack are directly simulated rather than empirically derived. The proposed design procedure was validated against published experimental results of reinforced concrete beams strengthened with near-surface mounted carbon fibre–reinforced polymer bars, near-surface mounted carbon fibre–reinforced polymer strips or side-near-surface mounted carbon fibre–reinforced polymer bars and show good accuracy. As it is less reliant on empirical formulations, the proposed design procedure should be applicable to various near-surface mounted reinforcement configurations and materials.

scholarly journals Behaviour of strengthened timber beams using near surface mounted Basalt Fibre Reinforced Polymer (BFRP) rebars

2018 ◽  
pp. 341-352 ◽  
Author(s):  
Alfred Kofi Gand ◽  
David Yeboah ◽  
Morteza Khorami ◽  
Adegoke Omotayo Olubanwo ◽  
Richard Lumor
Keyword(s):  
Basalt Fibre ◽  
Near Surface ◽  
Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Near Surface Mounted ◽  
Timber Beams
Sign in / Sign up

Export Citation Format

Share Document