Retentive Forces of Removable Partial Denture Clasp Assemblies Made From Polyaryletherketone and Cobalt‐Chromium: A Comparative Study

2021 ◽  
Author(s):  
Frank I. Gentz ◽  
Daniel I. Brooks ◽  
Peter C. Liacouras ◽  
Anton Petrich ◽  
Christopher M. Hamlin ◽  
...  
Keyword(s):  
Comparative Study ◽  
Cobalt Chromium ◽  
Removable Partial Denture ◽  
Partial Denture

scholarly journals Evaluation of the behavior system locator associated with a removable partial denture, finite element analysis

2018 ◽  
Vol 25 (2) ◽  
pp. 10
Author(s):  
Medardo Alexander Arenas-Chavarria ◽  
Samuel David Giraldo-Gómez ◽  
Federico Latorre-Correa ◽  
Junes Abdul Villarraga-Ossa
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Permanent Deformation ◽  
Vertical Direction ◽  
Cobalt Chromium ◽  
Removable Partial Denture ◽  
Element Analysis ◽  
Partial Denture ◽  
Solid Works ◽  
Von Mises

Aim: The purpose of this research was to evaluate the behavior of the system locator settings associated with distal extension removable partial denture lower (PPR) by finite element analysis (FEA). Materials and Methods: A Class II Kennedy 3D model using a CAD software Solid Works 2010 (SolidWorks Corp., Concord, MA, USA), and subsequently processed and analyzed by ANSYS Software version Model 14. One (1) was designed implant Tapered Screw -Vent® (ref TSVB10 Zimmer Dental-Carlsbad,CA,USA.) length x 10mm diameter 3.7mm with a 3.5mm platform, internal hexagon with its respective screw fixation; this was located at the tooth 37 as a rear pillar of a PPR, whose major connector was a lingual bar casting (alloy cobalt chromium), based combined (metal/ acrylic) with teeth to replace (37, 36 and 35). Efforts were evaluated von Mises in a 400N load. This analysis allowed assessing the performance of various prosthetic structures modeled and generated effects on bone-implant interface. Results: Differences between the values von Mises in all structures and loads were observed before there was no permanent deformation in any of them. Structures such as bone showed in normal values microstrain. Conclusions: The behavior of the PPRimplant connection, showed a favorable distribution efforts by using a PPR, subjecting it to load in the vertical direction.

scholarly journals Finite element analysis in defining the optimal shape and safety factor of retentive clasp arms of removable partial denture

2013 ◽  
Vol 70 (11) ◽  
pp. 999-1005
Author(s):  
Miodrag Scepanovic ◽  
Ljiljana Tihacek-Sojic ◽  
Milan Tasic ◽  
Radivoje Mitrovic ◽  
Aleksandar Todorovic ◽  
...  
Keyword(s):  
Stress Distribution ◽  
Safety Factor ◽  
Computer Aided Design ◽  
Pure Titanium ◽  
Commercially Pure Titanium ◽  
Cobalt Chromium ◽  
Removable Partial Denture ◽  
Cocrmo Alloy ◽  
Partial Denture ◽  
Cocrmo Alloys

Bacground/Aim. Retentive force of removable partial denture (RPD) directly depends on elastic force of stretched retentive clasp arms (RCAs). During deflection RCA must have even stress distribution. Safety factor is the concept which can be applied in estimating durability and functionality of RCAs. This study was based on analyzing properties of clasps designed by conventional clasp wax profiles and defining the optimal shapes of RCAs for stress distribution and safety factor aspects. Methods. Computer-aided-design (CAD) models of RCAs with simulated properties of materials used for fabrication of RPD cobalt-chromium-molybdenum (CoCrMo) alloy, commercially pure titanium (CPTi) and polyacetale were analyzed. Results. The research showed that geometrics of Rapidflex profiles from the BIOS concept are defined for designing and modeling RCAs from CoCrMo alloys. I-Bar and Bonihard clasps made from CPTi might have the same design as Co- CrMo clasp only by safety factor aspect, but it is obvious that CPTi are much more flexible, so their shape must be more massive. Polyacetale clasps should not be fabricated by BIOS concept for CoCrMo alloy. A proof for that is the low value of safety factor. Conclusion. The BIOS concept should be used only for RCAs made of CoCrMo alloy and different wax profiles should be used for fabricating clasps of other investigated materials. The contribution of this study may be the improvement of present systems for defining the clasps shapes made from CoCrMo alloys. The more significant application is possibility of creating new concepts in defining shapes of RCA made from CPTi and polyacetale.

scholarly journals Comparative study of some mechanical properties of cobalt chromium and polyether ether ketone thermoplastic removable partial denture clasps: an In-vitro Study

2020 ◽  
Vol 23 (3) ◽  
Author(s):  
Rady El-Baz ◽  
Mostafa Fayad ◽  
Mohamed Abas ◽  
Ahmed Shoieb ◽  
Mohammed Gad ◽  
...  
Keyword(s):  
Fatigue Resistance ◽  
Testing Machine ◽  
Mean Value ◽  
Cobalt Chromium ◽  
Thermoplastic Resin ◽  
Removable Partial Denture ◽  
Partial Denture ◽  
Polyether Ether Ketone ◽  
Group I ◽  
Ether Ketone

Objective: was to evaluate the retentive force, fatigue resistance and deformity of clasps made from two materials cobalt chromium and poly ether et her ketone (PEEK). Material and Methods: sixteen models were fabricated, each one having lower 1st molar. Models were divided into two groups according to materials, group I (GI) for cobalt chromium (Co-Cr) and group II (GII) for PEEK. Each testing models and its clasps were mounted inside universal testing machine, the retention was measured by applying withdrawal force to it by this machine at 5 mm/min. The Fatigue resistance is measured by the reduction in retention through repeated insertion and removal cycles using robot a chewing simulator. Removal and insertion cycling of clasps was carried out for 360, 730, 1080, 1,440,2,116 and 2,880 cycles (corresponding to 3,6,9,12, 18 and 24 months of simulated clinical use of a RPD) to simulate the fatigue resistance test. Deformity was measured before and after each cycling using a digital micrometer. Statistical analysis was done by 2-way-ANOVA test to detect significance effects of each variable. Results: Retention and fatigue resistance, after 360,730, 1080, 1,440,2,116 and 2,880 cycles totally the difference between Co-Cr and PEEK groups was statistically non-significant (P = 0.0980>0.05) where (Co-Cr > PEEK). Deformation results, regardless to evaluation time, Co-Cr group recorded statistically significant higher deformation mean value than PEEK group (P = 0.008<0.05). Regardless to material group, deformation mean value changed non significantly by time (P = 0.2882> 0.05). Conclusion: PEEK clasps (1.0 mm in cross section diameter) engage 0.50 mm undercut provide sufficient retention nearly similar that of Co-Cr clasps.KeywordsFlexible clasps; Polyether ether ketone, PEEK; Thermoplastic resin; Partial denture.

Sign in / Sign up

Export Citation Format

Share Document