Postural orthostatic tachycardia syndrome is associated with significant employment and economic loss

2021 ◽  
Author(s):  
Kate M. Bourne ◽  
Derek S. Chew ◽  
Lauren E. Stiles ◽  
Brett H. Shaw ◽  
Cyndya A. Shibao ◽  
...  
Keyword(s):  
Economic Loss ◽  
Postural Orthostatic Tachycardia Syndrome

Fertiliser evenness - losses and costs: A study on the economic benefits of uniform applications of fertiliser

1999 ◽  
pp. 215-220 ◽  
Author(s):  
R. Horrell ◽  
A.K. Metherell ◽  
S. Ford ◽  
C. Doscher
Keyword(s):  
Crop Yields ◽  
Cumulative Effect ◽  
Economic Loss ◽  
Economic Benefits ◽  
Significant Loss ◽  
Economic Losses ◽  
Financial Return ◽  
Spread Pattern ◽  
Fertiliser Application ◽  
Seed Crops

Over two million tonnes of fertiliser are applied to New Zealand pastures and crops annually and there is an increasing desire by farmers to ensure that the best possible economic return is gained from this investment. Spreading distribution measurements undertaken by Lincoln Ventures Ltd (LVL) have identified large variations in the evenness of fertiliser application by spreading machines which could lead to a failure to achieve optimum potential in some crop yields and to significant associated economic losses. To quantify these losses, a study was undertaken to calculate the effect of uneven fertiliser application on crop yield. From LVL's spreader database, spread patterns from many machines were categorised by spread pattern type and by coefficient of variation (CV). These patterns were then used to calculate yield losses when they were combined with the response data from five representative cropping and pastoral situations. Nitrogen fertiliser on ryegrass seed crops shows significant production losses at a spread pattern CV between 30% and 40%. For P and S on pasture, the cumulative effect of uneven spreading accrues, until there is significant economic loss occurring by year 3 for both the Waikato dairy and Southland sheep and beef systems at CV values between 30% and 40%. For nitrogen on pasture, significant loss in a dairy system occurs at a CV of approximately 40% whereas for a sheep and beef system it is at a CV of 50%, where the financial return from nitrogen application has been calculated at the average gross revenue of the farming system. The conclusion of this study is that the current Spreadmark standards are a satisfactory basis for defining the evenness requirements of fertiliser applications in most circumstances. On the basis of Spreadmark testing to date, more than 50% of the national commercial spreading fleet fails to meet the standard for nitrogenous fertilisers and 40% fails to meet the standard for phosphatic fertilisers.Keywords: aerial spreading, crop response, economic loss, fertiliser, ground spreading, striping, uneven application, uneven spreading, yield loss

Diseases of the kumara crop

2009 ◽  
Vol 62 ◽  
pp. 402-402
Author(s):  
S.L. Lewthwaite ◽  
P.J. Wright
Keyword(s):  
Fungal Pathogens ◽  
Ipomoea Batatas ◽  
Mechanical Damage ◽  
Soft Rot ◽  
Economic Loss ◽  
Root Surface ◽  
Black Rot ◽  
Rhizopus Stolonifer ◽  
Ceratocystis Fimbriata ◽  
Pink Rot

The predominant diseases of the commercial kumara (Ipomoea batatas) or sweetpotato crop are caused by fungal pathogens The field disease pink rot results from infection by the fungus Sclerotinia sclerotiorum Lesions form on vines but may spread down stems to the roots The widespread nature of this disease in sweetpotato appears peculiar to New Zealand Scurf is a disease caused by Monilochaetes infuscans which occurs in the field but may proliferate amongst stored roots The disease causes a superficial discolouration of the root surface which is mainly cosmetic but can also increase root water loss in storage Infection by Ceratocystis fimbriata produces a disease known as black rot The disease can be transmitted amongst plants at propagation but is particularly rampant amongst roots in storage This disease is readily transmitted and can cause severe economic loss Fusarium oxysporum causes surface rots in stored roots characterised by light to dark brown lesions that tend to be firm dry and superficial The lesions may be circular and centred on wounds caused by insects or mechanical damage at harvest Soft rot caused by Rhizopus stolonifer generally occurs in roots after they are washed and prepared for the market Fungal infection occurs through wounds or bruised tissue producing distinctive tufts of white fungal strands and black spores

Performance of Different Solid and Liquid Culture Media for the Improvement of Tuberculin Production

2020 ◽  
Keyword(s):  
Culture Media ◽  
Synthetic Medium ◽  
Chemical Properties ◽  
Economic Loss ◽  
Delayed Type Hypersensitivity ◽  
Basic Medium ◽  
Primary Methods ◽  
Lowenstein Jensen ◽  
Time Required ◽  
Modified Media

Tuberculosis (TB) is one of the most important zoonotic bacterial diseases. A huge economic loss which could be direct or indirect are associated with the disease. Currently, the primary methods used for detection of TB in humans and cattle include the measurement of a delayed type hypersensitivity to purified protein derivative (PPD). So, the need for preparation of purified PPD with adequate properties and increasing the final PPD yield with decreasing the time of tuberculin production has stimulated the interest in the development of its preparation. Our study was performed to compare between the standard and modified media for improving tuberculin production. Middle brook 7H10 agar medium was used as a modified basic medium for mycobacterial growth, followed by cultivation of mycobacteria on Middle brook 7H9 broth medium. For the production, strains were inoculated onto the culture medium (Dorest Henly synthetic medium). Other steps for tuberculin production was done according to standard Weighbridge protocol. The results demonstrated that the using of both Middle brook 7H10 agar and Middle brook 7H9 broth instead of Lowenstein-Jensen (LJ) and glycerin broth media which used in currently produced tuberculin, have better physical and chemical properties. In addition, reducing the time required for production by accelerating the time of microbial growth. Also, it was found that the tuberculin produced using modified media was slightly more potent or the same as currently tuberculin produced. So, both Middle brook 7H10 agar and Middle brook 7H9 broth media are recommended for production of tuberculin saving time and increasing potency of the product but more investigation was recommended for estimation types of protein present in both locally prepared and modified tuberculin.

Role of Zno Nanoparticles in Enhancing the Antimicrobial Property of Nitrocellulose Lacquer Wood Finish

2019 ◽  
Vol 12 (1) ◽  
pp. 91-98
Author(s):  
Shikhar Shukla ◽  
Shailendra Kumar ◽  
Ismita Nautiyal ◽  
Kishan Kumar V.S
Keyword(s):  
Antimicrobial Activity ◽  
Zno Nanoparticles ◽  
Antimicrobial Property ◽  
Economic Loss ◽  
Analysis Data ◽  
Wood Products ◽  
Mould Growth ◽  
Neem Oil ◽  
Nano Zno ◽  
Aesthetic Appearance

Background: Mould growth on coated wood products during shipment is the foremost apprehension for most of the wood industries in India. Well finished wood products tend to get deposited by staining moulds superficially in high humidity conditions during shipment. Though wood disfiguring fungi (stain moulds) normally have no significant effect on the mechanical properties of timber, they only affect the aesthetic appearance of the material without destructing the wood cell wall. This causes a huge economic loss to the manufacturer due to disfigurement of the appearance of wood products. Methods: The aim of this work is to test and enhance antimicrobial property of Nitrocellulose lacquer wood finish to prevent mould deposition on coated wood products. The work was carried out to screen and evaluate the antimicrobial activity of commercial Nitrocellulose lacquer. Several patents regarding antimicrobial activity of nano metal oxides have been visited. In order to enhance the mould resistance of this coating, its combinations with neem oil and ZnO nanoparticles were prepared and tested against the growth of staining moulds: Aspergillus niger and Penicillium sp. on the wood substrate of Melia dubia. The study was carried out for 500 hours under favorable conditions (Temperature and Relative Humidity (RH)) for the mould growth. The growth was analysed on the basis of surface area affected by stain moulds on coated wood samples. Results: The growth analysis data inferred that the ZnO nanoparticles had significant effect against the growth of stain moulds. The presence of ZnO nanoparticles increased the mould growth resistance of Nitrocellulose lacquer coating to a great extent compared to the ability of neem oil for the same. This finding demonstrates the potential use of nano ZnO for increasing the effectiveness of NC lacquer against mould growth without hampering its other properties. Conclusion: 1 % nano ZnO concentration in Nitrocellulose lacquer wood coating increased its efficacy against staining mould growth by 95 %.

Surgical Management of Atresia Ani in a Crossbred Calf

2019 ◽  
Vol 15 (02) ◽  
pp. 81-82
Author(s):  
Madan Pal ◽  
Kashi Ram ◽  
Chander Pal Garhwal ◽  
Virender .
Keyword(s):  
Body Weight ◽  
Weight Gain ◽  
Body Weight Gain ◽  
Present Report ◽  
Genetic Disorders ◽  
Economic Loss ◽  
Intestinal Atresia ◽  
Congenital Defect ◽  
Surgical Correction ◽  
Anal Opening

Atresia ani is a congenital defect that describes the absence of a normal anal opening. It is fatal unless a surgical correction is carried out to provide an anal opening. In female, the rectum may break through the vagina, forming a rectovaginal fistula permitting defecation via the vulva. Surgical treatment of atresia ani is indicated to save the animal’s life and to improve body weight gain. Intestinal atresia has been reported as a congenital defect in all species of domestic animals (Gass and Tibboel, 1980). Atresia ani may be caused by genetic disorders (chromosomes or transgenesis), environmental factors, or a combination of both (Cassini et al., 2005). Monsang et al. (2011) reported a case of double vulva with atresia ani in a crossbred calf. Atresia ani should be treated by a surgical operation to solve the problem, improve body weight gain, and reduce economic loss. The present report records a case of atresia ani in a crossbred cow-calf and its successful surgical correction.

Sign in / Sign up

Export Citation Format

Share Document