Optimum condition of conventional bleaching process for bleached shellac

2019 ◽  
Vol 42 (8) ◽  
Author(s):  
Suthep Saengsod ◽  
Sontaya Limmatvapirat ◽  
Manee Luangtana‐anan
Keyword(s):  
Optimum Condition ◽  
Bleaching Process ◽  
Bleached Shellac

scholarly journals Preparation of Paper Mulberry Fibers and Possibility of Cotton/Paper Mulberry Yarns Production

2016 ◽  
Vol 2016 ◽  
pp. 1-6
Author(s):  
Manoon Jitjaicham ◽  
Boonsri Kusuktham
Keyword(s):  
Hydrogen Peroxide ◽  
Optimum Condition ◽  
Nonionic Surfactant ◽  
Sodium Hydroxide ◽  
Cotton Fibers ◽  
Antifungal Property ◽  
Bleaching Process ◽  
Inner Bark ◽  
Yarn Production

The novelty of yarn production from cotton/paper mulberry fiber blends was reported. The objective of this research was to prepare the paper mulberry fibers and study the possibility of production of yarns from cotton/paper mulberry fibers. For preparation of paper mulberry fibers, the inner bark was first immersed in water for 24 h. Then, the fibers were treated with sodium hydroxide at concentration of 5–10% (w/v) for 1–3 h. After that, the bleaching process was conducted with hydrogen peroxide at concentration of 5–25% (v/v) for different temperature and time. Finally, the fibers were washed with 10% (v/v) of nonionic surfactant at temperature of 90°C for 30 minute to remove the residual gum from the fibers. The results showed that optimum condition for scouring of the paper mulberry fibers was 15% (w/v) sodium hydroxide at 90°C for 2 h. The bleaching process with 15% (v/v) H2O2 at 90°C for 90 minute was suitable. The obtained fibers were blended with the cotton fibers to produce yarns by open-end spinning method. The % elongation and tenacity of the blended yarns increased with the increasing of the paper mulberry ratio. Also, the antifungal property of yarns was improved by the blending of cotton fibers with the paper mulberry fibers.

New type electron gun with electrostatic and electromagnetic lenses

1978 ◽  
Vol 36 (1) ◽  
pp. 62-63
Author(s):  
T. Ichinokawa ◽  
H. Maeda
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
Optimum Condition ◽  
Bias Voltage ◽  
Electron Gun ◽  
Charge Effect ◽  
Micro Fabrication ◽  
Maximum Brightness ◽  
New Type ◽  
The Ideal

I. IntroductionThermionic electron gun with the Wehnelt grid is popularly used in the electron microscopy and electron beam micro-fabrication. It is well known that this gun could get the ideal brightness caluculated from the Lengumier and Richardson equations under the optimum condition. However, the design and ajustment to the optimum condition is not so easy. The gun has following properties with respect to the Wehnelt bias; (1) The maximum brightness is got only in the optimum bias. (2) In the larger bias than the optimum, the brightness decreases with increasing the bias voltage on account of the space charge effect. (3) In the smaller bias than the optimum, the brightness decreases with bias voltage on account of spreading of the cross over spot due to the aberrations of the electrostatic immersion lens.In the present experiment, a new type electron gun with the electrostatic and electromagnetic lens is designed, and its properties are examined experimentally.

OPTIMASI KONDISI EKSTRAKSI SENYAWA AKTIF ANTIOKSIDAN DARI BIJI ANGGUR

2019 ◽  
Vol 3 (2) ◽  
pp. 35
Author(s):  
Kartini Kartini ◽  
Azminah Azminah
Keyword(s):  
Free Radical ◽  
Optimum Condition ◽  
Active Compound ◽  
Grape Seed ◽  
Free Radical Scavenger ◽  
Water Bath ◽  
Radical Scavenger ◽  
Optimum Conditions ◽  
Ethanolic Solution ◽  
Reduced Pressure

In order to prepare standardized extract, optimization of extraction conditions of grape seed has been done. These conditions are type of menstrum (50, 70 and 96% of ethanolic solution), length of extraction (1, 2 and 4 hours) also method of evaporation (reduced pressure and opened air). Activity on free radical scavenger used as parameters to determine optimum conditions. Based on EC50 (concentration which scavenge 50% amount of free radical) can be concluded that optimum condition for extracting antioxidant active compound from grape seed are 70% ethanolic solution as menstrum, length of extraction 1 hour and evaporation on opened air use water bath.

PEMBUATAN SURFAKTAN DARI ASAM OLEAT

2019 ◽  
Vol 1 (3) ◽  
pp. 68
Author(s):  
Puguh Setyopratomo ◽  
Edy Purwanto ◽  
H. Yefrico ◽  
H. Yefrico
Keyword(s):  
Oleic Acid ◽  
Optimum Condition ◽  
Reaction Temperature ◽  
Catalyst Concentration ◽  
Acid Number ◽  
Esterification Reaction ◽  
Number Density ◽  
Sample Analysis ◽  
Reaction Conversion ◽  
Glycerol Mono

The synthesis of glycerol mono oleic from oleic acid and glycerol is classified as an esterification reaction. This research is aimed to study the influent of reaction temperature and catalyst concentration on reaction conversion. During the experiment the temperature of reaction mixture was varied as 110 oC, 130 oC, and 150 oC, while the catalyst concentration of 1%, 3 %, and 5% was used. The batch experiment was conducted in a glass reactor equipped with termometer, agitator, and reflux condensor. The oleic acid – glycerol mol ratio of 1 : 2 was used as a mixture feed. To maintain the reaction temperature at certain level, the oil bath was used. After the temperature of reaction mixture was reached the expected value, then H2SO4 catalyst was added to the reactor.  To measure the extent of the reaction, every 30 minutes the sample was drawn out from the reactor vessel. The sample analysis include acid number, density, and viscosity measurement. From this research the optimum condition which is the temperature of reaction of 150 oC and 1% catalyst concentration was obtained. At this optimum condition the convertion reach 86% and the analysis of other physical properties of the product show the acid number of 24.12, the density of 0.922 g/cc, and the viscosity of 118.4 cp.

Photocolouration of 2,4,4,6-Tetraaryl-4H-pyrans and Their Heteroanalogues: Importance of Hypervalent Photoisomers

1995 ◽  
Vol 60 (10) ◽  
pp. 1621-1633 ◽  
Author(s):  
Stanislav Böhm ◽  
Mojmír Adamec ◽  
Stanislav Nešpůrek ◽  
Josef Kuthan
Keyword(s):  
Reaction Kinetics ◽  
Absorption Spectra ◽  
Electronic Absorption ◽  
Electronic Absorption Spectra ◽  
Theoretical Data ◽  
Order Reaction ◽  
Bleaching Process ◽  
First Order ◽  
Photodegradation Products ◽  
Hypervalent Molecules

Molecular geometries of 2,4,4,6-tetraphenyl-4H-pyran (Ia), 4,4-(biphenyl-2,2e-diyl)-2,6-diphenyl-4H-pyran (Ib) and their heterocyclic isomers II-V were optimized by the PM3 method and used for the calculation of electronic absorption spectra by the CNDO/S-CI procedure. Comparison of the theoretical data with experimental UV-VIS absorption spectra made possible to select hypervalent molecules IIIa, IIIb, IVa and IVb being responsible for the photocolouration of 4H-pyrans Ia, Ib, while compounds Va, Vb, VI and VII come into account as possible photodegradation products. The bleaching process of the UV illuminated compound Ia is analyzed in terms of dispersive first-order reaction kinetics.

An environmentally friendly bleaching process for cotton fabrics: mechanism and application of UV/H2O2 system

Cellulose ◽  
2019 ◽  
Vol 27 (2) ◽  
pp. 1071-1083
Author(s):  
Nanfang Wang ◽  
Peixin Tang ◽  
Cunyi Zhao ◽  
Zheng Zhang ◽  
Gang Sun
Keyword(s):  
Environmentally Friendly ◽  
Cotton Fabrics ◽  
Bleaching Process ◽  
H2o2 System
Sign in / Sign up

Export Citation Format

Share Document