The effect of artificial accelerated aging on the color stability, microhardness, and surface roughness of different dental laminate veneer materials

2020 ◽  
Author(s):  
Simge Taşın ◽  
Gozde Celik ◽  
Artur İsmatullaev ◽  
Aslihan Usumez
Keyword(s):  
Surface Roughness ◽  
Accelerated Aging ◽  
Color Stability

scholarly journals Color Stability and Surface Roughness of Composites after Artificial Accelerated Aging

2017 ◽  
Vol 24 (2) ◽  
Author(s):  
Carolina Maschietto Pucinelli ◽  
Raquel A. B. Da Silva ◽  
Talitha S. Mellara ◽  
Patrícia Gatón-Hernández ◽  
Fernanda C. P. Pires-de-Souza ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Accelerated Aging ◽  
Color Stability

Assessment of Color Stability of Treated Leathers with Silicone Oil and Polyethylene Glycol

2014 ◽  
Vol 1 (1) ◽  
pp. 24-34
Author(s):  
Alireza K. ◽  
Hossein Ahmadi ◽  
Mohsen Mohammadi
Keyword(s):  
Ascorbic Acid ◽  
Polyethylene Glycol ◽  
Treatment Process ◽  
Color Change ◽  
Silicone Oil ◽  
Accelerated Aging ◽  
Color Stability ◽  
Antioxidant Additive ◽  
Before And After ◽  
Aesthetic Values

Lubricants and leather dressings are the most common treatments of dry and water logged historical leathers. Color change has a great importance during the time and treatment process, due to visual and aesthetic values of historic leather relics. Polyethylene glycol (PEG) and silicone oil (SiO) are frequently used leather dressings in the conservation procedures. Therefore, color stability of treated leathers with PEG and SiO were investigated before and after heat accelerated aging. Moreover, application of ascorbic acid was evaluated as an antioxidant additive for PEG (PEG+AA).Color change after treatment and aging were studied by colorimetry technique in the CIE *L*a*b system. Results indicated to severe color alteration in PEG treated and aged leathers with or without ascorbic acid. Whereas, SiO treated samples showed better stability and minimum color shift after aging. Silicone oil was characterized as the best dressing for historical leathers with compared to PEG and PEG+AA, due to its high stability and aesthetical properties.

Color stability of the resin cements with accelerated aging

2008 ◽  
Vol 33 (4) ◽  
pp. 389 ◽  
Author(s):  
Ha-Jeung Song ◽  
Su-Jung Park ◽  
Yun-Chan Hwang ◽  
Won-Mann Oh ◽  
In-Nam Hwang
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Resin Cements

scholarly journals Color Stability of a Pigmented Elastomer for Maxillofacial Appliances

1979 ◽  
Vol 58 (5) ◽  
pp. 1450-1454 ◽  
Author(s):  
Andrew Koran ◽  
Robert Yu ◽  
John M. Powers ◽  
Robert G. Craig
Keyword(s):  
Accelerated Aging ◽  
Color Stability ◽  
Clinical Use ◽  
Reflection Spectrophotometry ◽  
Excellent Color

The color stability of a series of eleven maxillofacial pigments was determined after accelerated aging using reflection spectrophotometry. The results indicate that seven of the pigments demonstrated good to excellent color stability, while four of the pigments were less promising for clinical use.

scholarly journals Color stability and surface roughness of artificial teeth brushed with an experimental Ricinus communis toothpaste

2015 ◽  
Vol 14 (4) ◽  
pp. 267-271 ◽  
Author(s):  
Lourenço de Moraes Rego Roselino ◽  
Carla Cecília Alandia-Román ◽  
Vanessa María Fagundes Leite ◽  
Cláudia Helena Silva-Lovato ◽  
Fernanda de Carvalho Panzeri Pires-de-Souza
Keyword(s):  
Surface Roughness ◽  
Ricinus Communis ◽  
Color Stability ◽  
Artificial Teeth

scholarly journals Accelerated Aging Effects on Surface Hardness and Roughness of Lingual Retainer Adhesives

2008 ◽  
Vol 78 (1) ◽  
pp. 140-144 ◽  
Author(s):  
Sabri Ilhan Ramoglu ◽  
Serdar Usumez ◽  
Tamer Buyukyilmaz
Keyword(s):  
Surface Roughness ◽  
Vickers Hardness ◽  
Statistical Significance ◽  
Accelerated Aging ◽  
Aging Effects ◽  
Surface Microhardness ◽  
Halogen Light ◽  
Before And After ◽  
The Mean ◽  
Lingual Retainer

Abstract Objective: To test the null hypothesis that accelerated aging has no effect on the surface microhardness and roughness of two light-cured lingual retainer adhesives. Materials and Methods: Ten samples of light-cured materials, Transbond Lingual Retainer (3M Unitek) and Light Cure Retainer (Reliance) were cured with a halogen light for 40 seconds. Vickers hardness and surface roughness were measured before and after accelerated aging of 300 hours in a weathering tester. Differences between mean values were analyzed for statistical significance using a t-test. The level of statistical significance was set at P < .05. Results: The mean Vickers hardness of Transbond Lingual Retainer was 62.8 ± 3.5 and 79.6 ± 4.9 before and after aging, respectively. The mean Vickers hardness of Light Cure Retainer was 40.3 ± 2.6 and 58.3 ± 4.3 before and after aging, respectively. Differences in both groups were statistically significant (P < .001). Following aging, mean surface roughness was changed from 0.039 μm to 0.121 μm and from 0.021 μm to 0.031 μm for Transbond Lingual Retainer and Light Cure Retainer, respectively. The roughening of Transbond Lingual Retainer with aging was statistically significant (P < .05), while the change in the surface roughness of Light Cure Retainer was not (P > .05). Conclusions: Accelerated aging significantly increased the surface microhardness of both light-cured retainer adhesives tested. It also significantly increased the surface roughness of the Transbond Lingual Retainer.

scholarly journals Bioadhesive Curcumin-Mediated Photodynamic Inactivation and Its Potential to Cause Undesirable Effects on Dental and Restorative Surfaces

Pharmaceutics ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1458
Author(s):  
Bárbara Donadon Reina ◽  
Carolina Santezi Neto ◽  
Patrícia Petromilli Nordi Sasso Garcia ◽  
Marlus Chorilli ◽  
Giovana Maria Fioramonti Calixto ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Liquid Crystal ◽  
Tooth Enamel ◽  
Dental Enamel ◽  
Color Stability ◽  
Composite Resins ◽  
Photodynamic Inactivation ◽  
Restorative Material ◽  
Negative Effects ◽  
Restorative Materials

Curcumin-mediated Photodynamic Inactivation (PDI) has shown great potential to disinfect specific sites on tooth enamel but may involve contact with restorative materials. Thus, before use in dentistry, it is necessary to investigate whether the PDI protocol causes undesirable changes in the surfaces of aesthetic restorative materials and dental enamel. This study investigated the effect of PDI mediated by curcumin (CUR) in a liquid crystal precursor system on color stability (ΔE), surface roughness (Ra), and microhardness (kgf) of three different composite resins and bovine dental enamel specimens. The microhardness and roughness readings were performed 60 days after the treatments while the color readings were performed immediately, 24, 48, and 72 h, 7, 14, 21, 30, and 60 days after the treatments. Results showed that CUR mediated-PDI does not seem to have the potential to promote any esthetic or mechanical changes to the surface of tooth enamel and can be applied safely in clinical practice. However, the results on color, roughness, and hardness obtained for composite resins show that some negative effects can be produced, depending on the type of restorative material; more experiments must be performed with different formulations and, perhaps, with lower concentrations of CUR.

scholarly journals Evaluation of the color stability and surface roughness of dual-cure, bulk-fill composites

2021 ◽  
Vol 11 (Suppl. 1) ◽  
pp. 266-273
Author(s):  
Zehra Şivgan Güner ◽  
Behiye Bolgül ◽  
Tacettin İnandı
Keyword(s):  
Surface Roughness ◽  
Color Stability ◽  
Pediatric Dentistry ◽  
Ease Of Use ◽  
Composite Resins ◽  
Distilled Water ◽  
Significant Difference ◽  
Cherry Juice ◽  
Experimental Group ◽  
Composite Samples

Aim: In recent years, tooth-colored, dual-cure, bulk-fill composite resins, which have attracted attention for their ease of use, constitute one of the latest developments in pediatric dentistry applications. This study aimed to evaluate the color stability and surface roughness properties of three different dual-cure, bulk-fill materials and one light-cure, bulk-fill composite material used in pediatric dentistry. Methodology: In this study, three different dual-cure, bulk-fill composites (Fill-Up, HyperFIL, Cention-N) and one light-polymerized bulk-fill composite (Reveal HD) were used. A total of 70 samples were obtained for surface roughness testing. The surface roughness testing was performed with a Hysitron TI 950 Triboindenter device. A total of 105 samples were obtained for the evaluation of color stability. Cherry juice, iced tea, and distilled water were used as solutions. Initial and final color measurements were made using a spectrophotometer. The color differences between measurements were recorded according to the CIEDE 2000 system. Results: The least surface roughness among the composite groups was observed in the light polymerized Cention-N composite samples in the experimental group. In the Fill-Up and Cention-N composite groups in the experimental group, the surface roughness of the samples left to self-polymerization and the samples polymerized with light showed a statistically significant difference (p < 0.05). Among the composite groups, the highest amount of coloring was observed in the Fill-Up composite samples, which were left to self-polymerization and kept in cherry juice in the experimental group. The least coloration among the composite groups was observed in the Cention-N composite samples polymerized with light and kept in distilled water. Conclusion: Based on this information, a decrease in surface roughness and an increase in color stability can be expected due to self-polymerization and the light polymerization of dual-cured, bulk-fill composites.   How to cite this article: Şivgan Güner Z, Bolgül B, İnandı T. Evaluation of the color stability and surface roughness of dual-cure, bulk-fill composites. Int Dent Res 2021;11(Suppl.1):266-273. https://doi.org/10.5577/intdentres.2021.vol11.suppl.39   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

Efficacy of polishing kits on the surface roughness and color stability of different composite resins

2017 ◽  
Vol 20 (5) ◽  
pp. 557 ◽  
Author(s):  
H Gumus ◽  
H Kocaagaoglu ◽  
T Aslan ◽  
A Gürbulak ◽  
H Albayrak ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Color Stability ◽  
Composite Resins
Sign in / Sign up

Export Citation Format

Share Document