scholarly journals Potential applications of nonthermal plasmas against biofilm-associated micro-organisms in vitro

2017 ◽  
Vol 122 (5) ◽  
pp. 1134-1148 ◽  
Author(s):  
P. Puligundla ◽  
C. Mok
Keyword(s):  
Nonthermal Plasmas ◽  
Potential Applications ◽  
Micro Organisms

scholarly journals Killing of adherent oral microbes by a non-thermal atmospheric plasma jet

2010 ◽  
Vol 59 (2) ◽  
pp. 206-212 ◽  
Author(s):  
Stefan Rupf ◽  
Antje Lehmann ◽  
Matthias Hannig ◽  
Barbara Schäfer ◽  
Andreas Schubert ◽  
...  
Keyword(s):  
Plasma Jet ◽  
Plasma Jets ◽  
Atmospheric Plasma ◽  
Killing Effect ◽  
E Coli ◽  
Potential Applications ◽  
Oral Microbes ◽  
Micro Organisms

Atmospheric plasma jets are being intensively studied with respect to potential applications in medicine. The aim of this in vitro study was to test a microwave-powered non-thermal atmospheric plasma jet for its antimicrobial efficacy against adherent oral micro-organisms. Agar plates and dentin slices were inoculated with 6 log10 c.f.u. cm−2 of Lactobacillus casei, Streptococcus mutans and Candida albicans, with Escherichia coli as a control. Areas of 1 cm2 on the agar plates or the complete dentin slices were irradiated with a helium plasma jet for 0.3, 0.6 or 0.9 s mm−2, respectively. The agar plates were incubated at 37 °C, and dentin slices were vortexed in liquid media and suspensions were placed on agar plates. The killing efficacy of the plasma jet was assessed by counting the number of c.f.u. on the irradiated areas of the agar plates, as well as by determination of the number of c.f.u. recovered from dentin slices. A microbe-killing effect was found on the irradiated parts of the agar plates for L. casei, S. mutans, C. albicans and E. coli. The plasma-jet treatment reduced the c.f.u. by 3–4 log10 intervals on the dentin slices in comparison to recovery rates from untreated controls. The microbe-killing effect was correlated with increasing irradiation times. Thus, non-thermal atmospheric plasma jets could be used for the disinfection of dental surfaces.

scholarly journals G-Quadruplex-Based Fluorescent Turn-On Ligands and Aptamers: From Development to Applications

Molecules ◽  
2019 ◽  
Vol 24 (13) ◽  
pp. 2416 ◽  
Author(s):  
Mubarak I. Umar ◽  
Danyang Ji ◽  
Chun-Yin Chan ◽  
Chun Kit Kwok
Keyword(s):  
Interaction Mechanism ◽  
Rna Aptamers ◽  
Rna Sequences ◽  
Turn On ◽  
Dna And Rna ◽  
Cellular Events ◽  
Potential Applications ◽  
Micro Organisms ◽  
Nucleic Acid Structures

Guanine (G)-quadruplexes (G4s) are unique nucleic acid structures that are formed by stacked G-tetrads in G-rich DNA or RNA sequences. G4s have been reported to play significant roles in various cellular events in both macro- and micro-organisms. The identification and characterization of G4s can help to understand their different biological roles and potential applications in diagnosis and therapy. In addition to biophysical and biochemical methods to interrogate G4 formation, G4 fluorescent turn-on ligands can be used to target and visualize G4 formation both in vitro and in cells. Here, we review several representative classes of G4 fluorescent turn-on ligands in terms of their interaction mechanism and application perspectives. Interestingly, G4 structures are commonly identified in DNA and RNA aptamers against targets that include proteins and small molecules, which can be utilized as G4 tools for diverse applications. We therefore also summarize the recent development of G4-containing aptamers and highlight their applications in biosensing, bioimaging, and therapy. Moreover, we discuss the current challenges and future perspectives of G4 fluorescent turn-on ligands and G4-containing aptamers.

scholarly journals Selection and Micropropagation of an Elite Melatonin Rich Tulsi (Ocimum sanctum L.) Germplasm Line

Agronomy ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 207
Author(s):  
Mukund R. Shukla ◽  
Annaliese Kibler ◽  
Christina E. Turi ◽  
Lauren A. E. Erland ◽  
J. Alan Sullivan ◽  
...  
Keyword(s):  
In Vitro Selection ◽  
Integrated Approach ◽  
Antioxidant Potential ◽  
Ocimum Sanctum ◽  
Natural Health Products ◽  
Seed Population ◽  
Health Products ◽  
Potential Applications ◽  
Medicinal Properties

Tulsi (Ocimum sanctum L.) is a sacred plant of medicinal and spiritual significance in many cultures. Medicinal properties of Tulsi are ascribed to its phytochemicals with antioxidant capabilities. The current study was undertaken to screen a large seed population of Tulsi to select germplasm lines with high antioxidant potential and to standardize protocols for micropropagation and biomass production to produce a phytochemically consistent crop. A total of 80 germplasm lines were established under in vitro conditions and screened for their antioxidant potential determined with the 2,2-diphenyl-1-picrylhydrazyl (DPPH) bioassay. The micropropagation of a selected line, named Vrinda, was established using nodal cultures grown on Murashige and Skoog medium containing benzylaminopurine (1.1 µM), gibberellic acid (0.3 µM), and activated charcoal (0.6%). The antioxidant phytohormones melatonin and serotonin were quantified in the field and greenhouse grown tissues of Vrinda and melatonin levels were found to be consistent in both conditions with higher serotonin levels under field conditions. This integrated approach combining the in vitro selection and propagation offers potential applications in the development of safe, effective, and novel natural health products of Tulsi, and many other medicinal plant species.

scholarly journals Synthesis and Characterization of Polyvinylpyrrolidone-Modified ZnO Quantum Dots and Their In Vitro Photodynamic Tumor Suppressive Action

2021 ◽  
Vol 22 (15) ◽  
pp. 8106
Author(s):  
Tianming Song ◽  
Yawei Qu ◽  
Zhe Ren ◽  
Shuang Yu ◽  
Mingjian Sun ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Photodynamic Therapy ◽  
Inhibitory Effect ◽  
Therapeutic Effects ◽  
In Vivo Experiments ◽  
Potential Applications ◽  
Zno Quantum Dots ◽  
Zno Qds

Despite the numerous available treatments for cancer, many patients succumb to side effects and reoccurrence. Zinc oxide (ZnO) quantum dots (QDs) are inexpensive inorganic nanomaterials with potential applications in photodynamic therapy. To verify the photoluminescence of ZnO QDs and determine their inhibitory effect on tumors, we synthesized and characterized ZnO QDs modified with polyvinylpyrrolidone. The photoluminescent properties and reactive oxygen species levels of these ZnO/PVP QDs were also measured. Finally, in vitro and in vivo experiments were performed to test their photodynamic therapeutic effects in SW480 cancer cells and female nude mice. Our results indicate that the ZnO QDs had good photoluminescence and exerted an obvious inhibitory effect on SW480 tumor cells. These findings illustrate the potential applications of ZnO QDs in the fields of photoluminescence and photodynamic therapy.

scholarly journals Design and characterization of 3D printed, neomycin-eluting poly-L-lactide mats for wound-healing applications

2021 ◽  
Vol 32 (4) ◽  
Author(s):  
Mahima Singh ◽  
Sriramakamal Jonnalagadda
Keyword(s):  
Release Kinetics ◽  
Biological Properties ◽  
In Vitro Dissolution ◽  
3D Printer ◽  
Topical Antibiotic ◽  
Young’S Moduli ◽  
Base Polymer ◽  
Potential Applications ◽  
3D Printed

AbstractThis study evaluates the suitability of 3D printed biodegradable mats to load and deliver the topical antibiotic, neomycin, for up to 3 weeks in vitro. A 3D printer equipped with a hot melt extruder was used to print bandage-like wound coverings with porous sizes appropriate for cellular attachment and viability. The semicrystalline polyester, poly-l-lactic acid (PLLA) was used as the base polymer, coated (post-printing) with polyethylene glycols (PEGs) of MWs 400 Da, 6 kDa, or 20 kDa to enable manipulation of physicochemical and biological properties to suit intended applications. The mats were further loaded with a topical antibiotic (neomycin sulfate), and cumulative drug-release monitored for 3 weeks in vitro. Microscopic imaging as well as Scanning Electron Microscopy (SEM) studies showed pore dimensions of 100 × 400 µm. These pore dimensions were achieved without compromising mechanical strength; because of the “tough” individual fibers constituting the mat (Young’s Moduli of 50 ± 20 MPa and Elastic Elongation of 10 ± 5%). The in vitro dissolution study showed first-order release kinetics for neomycin during the first 20 h, followed by diffusion-controlled (Fickian) release for the remaining duration of the study. The release of neomycin suggested that the ability to load neomycin on to PLLA mats increases threefold, as the MW of the applied PEG coating is lowered from 20 kDa to 400 Da. Overall, this study demonstrates a successful approach to using a 3D printer to prepare porous degradable mats for antibiotic delivery with potential applications to dermal regeneration and tissue engineering.

scholarly journals Production of Human Pluripotent Stem Cell-Derived Hepatic Cell Lineages and Liver Organoids: Current Status and Potential Applications

2020 ◽  
Vol 7 (2) ◽  
pp. 36 ◽  
Author(s):  
João P. Cotovio ◽  
Tiago G. Fernandes
Keyword(s):  
Cell Types ◽  
In Vitro Models ◽  
Hepatic Cell ◽  
Current Status ◽  
Organ Shortage ◽  
Cell Lineages ◽  
Potential Applications ◽  
Liver Organoids

Liver disease is one of the leading causes of death worldwide, leading to the death of approximately 2 million people per year. Current therapies include orthotopic liver transplantation, however, donor organ shortage remains a great challenge. In addition, the development of novel therapeutics has been limited due to the lack of in vitro models that mimic in vivo liver physiology. Accordingly, hepatic cell lineages derived from human pluripotent stem cells (hPSCs) represent a promising cell source for liver cell therapy, disease modelling, and drug discovery. Moreover, the development of new culture systems bringing together the multiple liver-specific hepatic cell types triggered the development of hPSC-derived liver organoids. Therefore, these human liver-based platforms hold great potential for clinical applications. In this review, the production of the different hepatic cell lineages from hPSCs, including hepatocytes, as well as the emerging strategies to generate hPSC-derived liver organoids will be assessed, while current biomedical applications will be highlighted.

Cellular and immunological basis of the host-parasite relationship during infection withNeospora caninum

Parasitology ◽  
2006 ◽  
Vol 133 (3) ◽  
pp. 261-278 ◽  
Author(s):  
A. HEMPHILL ◽  
N. VONLAUFEN ◽  
A. NAGULESWARAN
Keyword(s):  
Host Cell ◽  
Cell Biology ◽  
Neospora Caninum ◽  
Host Cells ◽  
Term Survival ◽  
Prevention Of Infection ◽  
Parasite Relationship ◽  
Potential Applications

Neospora caninumis an apicomplexan parasite that is closely related toToxoplasma gondii, the causative agent of toxoplasmosis in humans and domestic animals. However, in contrast toT. gondii, N. caninumrepresents a major cause of abortion in cattle, pointing towards distinct differences in the biology of these two species. There are 3 distinct key features that represent potential targets for prevention of infection or intervention against disease caused byN. caninum. Firstly, tachyzoites are capable of infecting a large variety of host cellsin vitroandin vivo. Secondly, the parasite exploits its ability to respond to alterations in living conditions by converting into another stage (tachyzoite-to-bradyzoite orvice versa). Thirdly, by analogy withT. gondii, this parasite has evolved mechanisms that modulate its host cells according to its own requirements, and these must, especially in the case of the bradyzoite stage, involve mechanisms that ensure long-term survival of not only the parasite but also of the host cell. In order to elucidate the molecular and cellular bases of these important features ofN. caninum, cell culture-based approaches and laboratory animal models are being exploited. In this review, we will summarize the current achievements related to host cell and parasite cell biology, and will discuss potential applications for prevention of infection and/or disease by reviewing corresponding work performed in murine laboratory infection models and in cattle.

Effect of ionophores on in vitro caecal fermentation in rabbits

1997 ◽  
Vol 128 (4) ◽  
pp. 495-498 ◽  
Author(s):  
M. MAROUNEK ◽  
J. šIMŮNEK ◽  
D. DUšKOVÁ ◽  
V. SKŘIVANOVÁ
Keyword(s):  
Czech Republic ◽  
Hydrogen Atmosphere ◽  
Alternative Method ◽  
Micro Organisms ◽  
Caecal Fermentation ◽  
Stimulation Of

Experiments were carried out at Uhříněves, Czech Republic, in 1995 and 1996 to evaluate the effect of salinomycin, monensin, lasalocid and maduramicin on in vitro rabbit caecal fermentation. In cultures supplied with starch, hemicellulose and pectin, all ionophores in the range of concentrations tested (1–10 μg/ml) stimulated methanogenesis. Ionophores at 5 μg/ml increased the production of methane by 26–35% and decreased the production of acetate (P<0·05). Significantly more acetate was produced in mixotrophic acetogenic cultures of caecal micro-organisms with glucose (2 mg/ml) under hydrogen atmosphere than under nitrogen. The H2-dependent formation of acetate was blocked in cultures with ionophores. The stimulation of methanogenesis by salinomycin, monensin, lasalocid and maduramicin can thus be related to the inhibition of acetogenesis, which is an alternative method of H2 utilization in the rabbit caecum.

Development of Multilayered Chlorogenate-Peptide Based Biocomposite Scaffolds for Potential Applications in Ligament Tissue Engineering - An In Vitro Study

2017 ◽  
Vol 34 ◽  
pp. 37-56 ◽  
Author(s):  
Harrison T. Pajovich ◽  
Alexandra M. Brown ◽  
Andrew M. Smith ◽  
Sara K. Hurley ◽  
Jessica R. Dorilio ◽  
...  
Keyword(s):  
Tissue Regeneration ◽  
Type I Collagen ◽  
Phase Changes ◽  
Peptide Sequence ◽  
Proteoglycan Synthesis ◽  
Type I ◽  
Average Roughness ◽  
Potential Applications ◽  
Self Assembled

In this work, for the first time, chlorogenic acid, a natural phytochemical, was conjugated to a lactoferrin derived antimicrobial peptide sequence RRWQWRMKKLG to develop a self-assembled template. To mimic the components of extracellular matrix, we then incorporated Type I Collagen, followed by a sequence of aggrecan peptide (ATEGQVRVNSIYQDKVSL) onto the self-assembled templates for potential applications in ligament tissue regeneration. Mechanical properties and surface roughness were studied and the scaffolds displayed a Young’s Modulus of 169 MP and an average roughness of 72 nm respectively. Thermal phase changes were studied by DSC analysis. Results showed short endothermic peaks due to water loss and an exothermic peak due to crystallization of the scaffold caused by rearrangement of the components. Biodegradability studies indicated a percent weight loss of 27.5 % over a period of 37 days. Furthermore, the scaffolds were found to adhere to fibroblasts, the main cellular component of ligament tissue. The scaffolds promoted cell proliferation and displayed actin stress fibers indicative of cell motility and attachment. Collagen and proteoglycan synthesis were also promoted, demonstrating increased expression and deposition of collagen and proteoglycans. Additionally, the scaffolds exhibited antimicrobial activity against Staphylococcus epidermis bacteria, which is beneficial for minimizing biofilm formation if potentially used as implants. Thus, we have developed a novel biocomposite that may open new avenues to enhance ligament tissue regeneration.

Sign in / Sign up

Export Citation Format

Share Document