scholarly journals Flash sintering of cationic conductive ceramics: a way to build multilayer systems

2021 ◽  
Author(s):  
Marie Lachal ◽  
Hana El Khal ◽  
Didier Bouvard ◽  
Jean‐Marc Chaix ◽  
Renaud Bouchet ◽  
...  
Keyword(s):  
Multilayer Systems ◽  
Flash Sintering ◽  
Conductive Ceramics

Electron Microscopy Studies of The Chemistry And Microstructure of BaF2 / YBa2Cu3O7-x Thin Films

1994 ◽  
Vol 52 ◽  
pp. 796-797
Author(s):  
J. L. Lee ◽  
C. A. Weiss ◽  
R. A. Buhrman ◽  
J. Silcox
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Thin Films ◽  
Scanning Transmission Electron Microscope ◽  
Atomic Scale ◽  
Island Growth ◽  
Multilayer Systems ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Mgo Substrate

BaF2 thin films are being investigated as candidates for use in YBa2Cu3O7-x (YBCO) / BaF2 thin film multilayer systems, given the favorable dielectric properties of BaF2. In this study, the microstructural and chemical compatibility of BaF2 thin films with YBCO thin films is examined using transmission electron microscopy and microanalysis. The specimen was prepared by using laser ablation to first deposit an approximately 2500 Å thick (0 0 1) YBCO thin film onto a (0 0 1) MgO substrate. An approximately 7500 Å thick (0 0 1) BaF2 thin film was subsequendy thermally evaporated onto the YBCO film.Images from a VG HB501A UHV scanning transmission electron microscope (STEM) operating at 100 kV show that the thickness of the BaF2 film is rather uniform, with the BaF2/YBCO interface being quite flat. Relatively few intrinsic defects, such as hillocks and depressions, were evident in the BaF2 film. Moreover, the hillocks and depressions appear to be faceted along {111} planes, suggesting that the surface is smooth and well-ordered on an atomic scale and that an island growth mechanism is involved in the evolution of the BaF2 film.

Interfacial structures of dissimilar materials joined by capacitor-discharge welding

1994 ◽  
Vol 52 ◽  
pp. 534-535
Author(s):  
C. P. Doğan ◽  
R. D. Wilson ◽  
J. A. Hawk
Keyword(s):  
Rapid Solidification ◽  
Fusion Zone ◽  
Dissimilar Materials ◽  
Solidification Process ◽  
Weld Interface ◽  
Capacitor Discharge ◽  
Fine Grained ◽  
Iron Aluminum ◽  
Conductive Ceramics ◽  
Capacitor Discharge Welding

Capacitor Discharge Welding is a rapid solidification technique for joining conductive materials that results in a narrow fusion zone and almost no heat affected zone. As a result, the microstructures and properties of the bulk materials are essentially continuous across the weld interface. During the joining process, one of the materials to be joined acts as the anode and the other acts as the cathode. The anode and cathode are brought together with a concomitant discharge of a capacitor bank, creating an arc which melts the materials at the joining surfaces and welds them together (Fig. 1). As the electrodes impact, the arc is extinguished, and the molten interface cools at rates that can exceed 106 K/s. This process results in reduced porosity in the fusion zone, a fine-grained weldment, and a reduced tendency for hot cracking.At the U.S. Bureau of Mines, we are currently examining the possibilities of using capacitor discharge welding to join dissimilar metals, metals to intermetallics, and metals to conductive ceramics. In this particular study, we will examine the microstructural characteristics of iron-aluminum welds in detail, focussing our attention primarily on interfaces produced during the rapid solidification process.

Pretransition in dipalmitoyl lecithin multilayer systems

1978 ◽  
Vol 3 ◽  
pp. 289-289 ◽  
Author(s):  
L. Trahms ◽  
E. Boroske
Keyword(s):  
Multilayer Systems ◽  
Dipalmitoyl Lecithin

scholarly journals Effects of Flash Sintering Parameters on Performance of Ceramic Insulator

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1157
Author(s):  
Yong Liu ◽  
Xingwang Huang
Keyword(s):  
Grain Size ◽  
Electric Field ◽  
Field Intensity ◽  
Current Density ◽  
Electric Field Intensity ◽  
Unit Cell ◽  
Uniform Structure ◽  
Ceramic Insulator ◽  
Flash Sintering ◽  
Ceramic Insulators

Ceramic outdoor insulators play an important role in electrical insulation and mechanical support because of good chemical and thermal stability, which have been widely used in power systems. However, the brittleness and surface discharge of ceramic material greatly limit the application of ceramic insulators. From the perspective of sintering technology, flash sintering technology is used to improve the performance of ceramic insulators. In this paper, the simulation model of producing the ceramic insulator by the flash sintering technology was set up. Material Studio was used to study the influence of electric field intensity and temperature on the alumina unit cell. COMSOL was used to study the influence of electric field intensity and current density on sintering speed, density and grain size. Obtained results showed that under high temperature and high voltage, the volume of the unit cell becomes smaller and the atoms are arranged more closely. The increase of current density can result in higher ceramic density and larger grain size. With the electric field intensity increasing, incubation time shows a decreasing tendency and energy consumption is reduced. Ceramic insulators with a higher uniform structure and a smaller grain size can show better dielectric performance and higher flashover voltage.

scholarly journals Flash sintering of zircon: rapid consolidation of an ultrahigh bandgap ceramic

2021 ◽  
pp. 1-8
Author(s):  
Juan Manuel Martinez ◽  
Mattia Biesuz ◽  
Jian Dong ◽  
Matias Gauna ◽  
Gustavo Suarez ◽  
...  
Keyword(s):  
Flash Sintering

scholarly journals Development of a processing map for safe flash sintering of Gadolinium‐doped Ceria

2021 ◽  
Author(s):  
Tarini Prasad Mishra ◽  
Christian Lenser ◽  
Rishi Raj ◽  
Olivier Guillon ◽  
Martin Bram
Keyword(s):  
Processing Map ◽  
Doped Ceria ◽  
Flash Sintering ◽  
Gadolinium Doped Ceria
Sign in / Sign up

Export Citation Format

Share Document