Effectiveness of a personalized ventilation system in reducing personal exposure against directly released simulated cough droplets

Indoor Air ◽  
2015 ◽  
Vol 25 (6) ◽  
pp. 683-693 ◽  
Author(s):  
J. Pantelic ◽  
K. W. Tham ◽  
D. Licina
Keyword(s):  
Ventilation System ◽  
Personal Exposure ◽  
Personalized Ventilation

Performance of airflow distance from personalized ventilation on personal exposure to airborne droplets from different orientations

2020 ◽  
pp. 1420326X2095124
Author(s):  
Jingcui Xu ◽  
Sauchung Fu ◽  
Christopher Y. H. Chao
Keyword(s):  
Disease Transmission ◽  
Respiratory Activity ◽  
Personal Exposure ◽  
Healthy Person ◽  
Potential Method ◽  
Infected Person ◽  
Pv System ◽  
Testing Conditions ◽  
Proper Design ◽  
Personalized Ventilation

This study investigated the effect of airflow distance from a personalized ventilation (PV) system on the personal exposure of a PV user to exhaled droplets from different orientations. Constant and dynamic airflow from the PV system was studied. A PV system was designed to produce both constant and dynamic airflows with different periods. Thermal manikins were used to simulate a healthy person (HP), also the PV user, influenced by a respiratory activity from an infected person (IP) at different orientations. Results show that, with a short distance of 0.2 m between the PV and the HP, both constant and dynamic PV flow can effectively protect the HP at all orientations considered; with a longer distance of 0.5 m between the PV and the HP, at some orientations, neither constant PV flow nor dynamic PV flow could protect the HP from the IP under our testing conditions. PV is a potential method to prevent disease transmission. However, a proper design is essential, and the relative position of the PV terminal, the IP and the HP and the distance of the PV from the HP are important factors to be considered so as to achieve the best performance.

scholarly journals Operation Testing of an Advanced Personalized Ventilation System

Energies ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1596 ◽  
Author(s):  
Csáky ◽  
Kalmár ◽  
Kalmár
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Distribution System ◽  
Noise Level ◽  
Background Noise ◽  
Ventilation System ◽  
Air Distribution ◽  
Personalized Ventilation

Using personalized ventilation systems in office buildings, important energy saving might be obtained, which may improve the indoor air quality and thermal comfort sensation of occupants at the same time. In this paper, the operation testing results of an advanced personalized ventilation system are presented. Eleven different air terminal devices were analyzed. Based on the obtained air velocities and turbulence intensities, one was chosen to perform thermal comfort experiments with subjects. It was shown that, in the case of elevated indoor temperatures, the thermal comfort sensation can be improved considerably. A series of measurements were carried out in order to determine the background noise level and the noise generated by the personalized ventilation system. It was shown that further developments of the air distribution system are needed.

Influence of sinusoidal airflow and airflow distance on human thermal response to a personalized ventilation system

2016 ◽  
Vol 27 (3) ◽  
pp. 317-330 ◽  
Author(s):  
Yongxin Xie ◽  
Sauchung Fu ◽  
Chili Wu ◽  
Christopher Y.H. Chao
Keyword(s):  
Thermal Comfort ◽  
Thermal Sensation ◽  
Human Subjects ◽  
Ventilation System ◽  
Thermal Response ◽  
Joint Effect ◽  
Experimental Conditions ◽  
Movement Perception ◽  
Air Movement ◽  
Personalized Ventilation

Since the concept of personalized ventilation was introduced in the late 1990s, many studies on thermal comfort have been conducted and a number of parameters identified. In this research, the influence of three parameters, the airflow speed, airflow fluctuating period and a parameter which has drawn less attention in previous studies – the airflow distance between the human subject and the nozzle of the personalized ventilation device on air movement perception, thermal sensation and thermal comfort – are studied. The combinations of fluctuating period and airflow amplitude were selected based on the Power Spectrum Density method. Then 25 human subjects participated in the thermal comfort experiment, each of them underwent 54 tests of different experimental conditions and expressed their thermal feelings by completing the survey questionnaire. Our findings showed that a longer airflow distance could lead to cooler thermal sensation, but not cause any difference in thermal comfort. Changing the fluctuating period of the sinusoidal airflow from 10 s to 60 s did not cause an influence on thermal sensation, but a shorter fluctuating period could result in a higher air movement perception. When dealing with thermal comfort issues, a joint effect with airflow speed and fluctuating period occurs and this should also be considered.

scholarly journals Sistema de Ventilação Personalizada Instalado na Poltrona em Cabine de Aeronave: Análise da Concentração e da Eficiência na Remoção de Partículas Expiratórias

REVISTA PLURI ◽  
2020 ◽  
Vol 1 (3) ◽  
pp. 77
Author(s):  
Victor Barbosa Felix ◽  
Douglas Fabichack Jr. ◽  
Paulo Rogério Celline ◽  
Arlindo Tribess
Keyword(s):  
Air Quality ◽  
Removal Efficiency ◽  
Experimental Analysis ◽  
Ventilation System ◽  
Particle Removal ◽  
Pv System ◽  
Aircraft Cabins ◽  
Personalized Ventilation ◽  
Mode Of Transport ◽  
Ventilation Systems

As pessoas viajam cada vez mais de avião e, muitas vezes, estas viagens são longas. A qualidade do ar dentro desse meio de transporte torna-se então uma questão crucial, principalmente agora que o mundo está passando por uma pandemia causada pela COVID 19. Uma forma de melhorar a qualidade do ar e as condições de conforto térmico dentro de uma cabine de aeronave está na utilização de novos sistemas de ventilação personalizada. No presente trabalho é apresentada análise experimental da influência de um sistema de ventilação personalizada (PV) na concentração e na eficiência de remoção de partículas expiratórias em cabine de aeronave com sistema de ventilação convencional por mistura (MV). Os ensaios foram realizados em um mock-up com 12 lugares, com três fileiras de quatro poltronas. Medições de concentração de partículas foram realizadas na região de respiração, a 1,10m do piso, em todos os assentos da cabine. Os resultados mostram que a eficiência na remoção de partículas na região de respiração, considerando toda a cabine, é de até 25% para partículas de 5 a 10 μm e de até 30% para partículas de 2 a 5μm. Os resultados mostram também que a eficiência na remoção de partículas é praticamente igual para o sistema PV operando tanto no assento da janela quanto no assento do corredor para todos os tamanhos de partículas. Os resultados da eficiência de remoção de partículas mostram que o sistema PV influencia significativamente a remoção de partículas no assento no qual o sistema está operando e na cabine como um todo.Palavras-chave: Sistemas de Ventilação, Qualidade do Ar, Partículas Expiratórias, Análise Experimental, Cabines de AeronavesAbstractPeople travel more and more by plane, and often these trips are long. Air quality within this mode of transport then becomes a crucial issue, especially now that the world is experiencing a pandemic caused by COVID 19. A way to improve air quality and thermal comfort conditions inside a cabin of aircraft is in the use of new personalized ventilation systems. This work presents an experimental analysis of the influence of a personalized ventilation system (PV) on the concentration and efficiency of removal of expiratory particles in an aircraft cabin with a conventional mixing ventilation system (MV). The tests were carried out in a mock-up with 12 seats, three rows with four abreast. Measurements of particle concentration were performed in the breathing region, 1.10 m from the floor, in all seats of the cabin. The results show that the efficiency in removing particles in the breathing region, considering the entire cabin, is up to 25% for particles of 5 to 10 μm and up to 30% for particles of 2 to 5 μm. The results also show that particle removal efficiency is practically the same for the PV system operating on both the window seat and the aisle seat for all particle sizes. The results of particle removal efficiency show that the PV system significantly influences the removal of particles in the seat on which the system is perating and in the cab as a whole.Keyworks: Ventilation systems, Air Quality, Expiratory droplets, Experimental analysis, Aircraft cabins

Effective Mixed-Mode Ventilation System With Intermittent Personalized Ventilation for Improving Thermal Comfort in an Office Space

2020 ◽  
Author(s):  
Elvire Katramiz ◽  
Nesreen Ghaddar ◽  
Kamel Ghali
Keyword(s):  
Thermal Comfort ◽  
Control Strategy ◽  
Mixed Mode ◽  
Natural Ventilation ◽  
Energy Savings ◽  
Ventilation System ◽  
Energy Performance ◽  
Building Performance Simulation ◽  
Office Space ◽  
Personalized Ventilation

Abstract The mixed-mode ventilation (MMV) system is an energy-friendly ventilation technique that combines natural ventilation (NV) with mechanical air conditioning (AC). It draws in fresh air when the outdoor conditions are favorable or activates otherwise the AC system during occupancy hours. To improve performance of the MMV system, it is proposed to integrate it with an intermittent personalized ventilation (IPV) system. IPV delivers cool clean air intermittently to the occupant and enhances occupant thermal comfort. With the proper ventilation control strategy, IPV can aid MMV by increasing NV mode operational hours, and improve the energy performance of the AC system by relaxing the required macroclimate set point temperature. The aim of this work is to study the IPV+MMV system performance for an office space application in terms of thermal comfort and energy savings through the implementation of an appropriate control strategy. A validated computational fluid dynamics (CFD) model of an office space equipped with IPV is used to assess the thermal fields in the vicinity of an occupant. It is then coupled with a transient bio-heat and comfort models to find the overall thermal comfort levels. Subsequently, a building-performance simulation study is performed using Integrated Environmental Solutions-Virtual Environment (IES-VE) for an office in Beirut, Lebanon for the typical summer month of July. An energy analysis is conducted to predict the savings of the suggested design in comparison to the conventional AC system. Results showed that the use of IPV units and MMV significantly reduced the number of AC operation hours while providing thermal comfort.

Sign in / Sign up

Export Citation Format

Share Document