Comparison of the fracture strength of endodontically treated teeth restored with polyether ether ketone, zirconia and glass‐fiber post‐core systems

2021 ◽  
Author(s):  
Merve Ozarslan ◽  
U. Sebnem Buyukkaplan ◽  
M. Mustafa Ozarslan
Keyword(s):  
Glass Fiber ◽  
Fracture Strength ◽  
Fiber Post ◽  
Endodontically Treated Teeth ◽  
Polyether Ether Ketone ◽  
Glass Fiber Post ◽  
Ether Ketone

scholarly journals Influence of diameter and intraradicular post in the stress distribution. Finite element analysis

2016 ◽  
Vol 45 (3) ◽  
pp. 171-176 ◽  
Author(s):  
Cleidiel Aparecido Araujo LEMOS ◽  
Daniel Augusto de Faria ALMEIDA ◽  
Victor Eduardo de Souza BATISTA ◽  
Carol Cantieri MELLO ◽  
Fellippo Ramos VERRI ◽  
...  
Keyword(s):  
Finite Element ◽  
Carbon Fiber ◽  
Glass Fiber ◽  
Fiber Post ◽  
Endodontically Treated Teeth ◽  
Cast Metal ◽  
Biomechanical Behavior ◽  
Glass Fiber Post ◽  
Oblique Load ◽  
Metal Post

Abstract Introduction The biomechanical behavior of endodontically treated teeth depending on the selected restorative material and tooth situation to be restored. Objective To analyze by the two-dimensional finite element method the biomechanical behavior of different diameters in intraradicular posts and teeth with coronal remaining of 2mm. Material and method Six models were made with three types of posts, as follows: Glass fiber post, carbon fiber post, and cast metal post, both with diameter # 1 (1.1 mm in diameter) and # 2 (1.3 mm of diameter). The modeling was performed using the Rhinoceros 4.0 program. The FEMAP 10.2 and NEiNastran 9.2 programs were used to develop finite element models. The loading used was 100N for axial and oblique forces. The results were visualized using the von Mises stress map. The statistical analysis was made using analysis of variance (ANOVA) and Tukey post-test, with a significance level of 5%. Result The oblique loading stress values were higher than the axial loading (p<0.001) for both situations. The glass fiber post showed the lowest concentrations of stress on both loads (p<0.001). The carbon fiber post presented significant difference compared to the cast metal post, only in the oblique load (p=0.007). The diameter did not increase the stress of the evaluated posts (p=0.302). Conclusion The fiber posts were more favorable for restoration of endodontically treated teeth; the increase of diameter did not influence the increase of tension; the oblique load was more harmful for both posts and tooth structure.

scholarly journals Influence of ferrule preparation with or without glass fiber post on fracture resistance of endodontically treated teeth

2010 ◽  
Vol 18 (4) ◽  
pp. 360-363 ◽  
Author(s):  
Alexandra Furtado de Lima ◽  
Aloísio Oro Spazzin ◽  
Daniel Galafassi ◽  
Lourenço Correr-Sobrinho ◽  
Bruno Carlini-Júnior
Keyword(s):  
Glass Fiber ◽  
Fracture Resistance ◽  
Fiber Post ◽  
Endodontically Treated Teeth ◽  
Glass Fiber Post

scholarly journals Fracture Resistance of Simulated Immature Teeth after Different Intra-radicular Treatments

2015 ◽  
Vol 26 (3) ◽  
pp. 211-215 ◽  
Author(s):  
Gustavo Sivieri-Araujo ◽  
Mario Tanomaru-Filho ◽  
Juliane Maria Guerreiro-Tanomaru ◽  
Eduardo Antunes Bortoluzzi ◽  
Érica Gouveia Jorge ◽  
...  
Keyword(s):  
Glass Fiber ◽  
Fracture Strength ◽  
Root Canal ◽  
Fracture Resistance ◽  
Testing Machine ◽  
Fiber Post ◽  
Immature Teeth ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Glass Fiber Post

The aim of this study was to evaluate the fracture resistance of simulated immature teeth after different intra-radicular treatments. Crowns and roots of bovine incisors were cut transversally and removed to simulate immature teeth. Root canal preparation and flaring were performed using a bur in crown-apex and apex-crown direction. The samples were distributed into 5 groups (n=10): Positive control (PoC) - no root canal flaring or filling; Negative control (NeC) - teeth were sectioned and their root canals were flared; Direct anatomical glass fiber post (RaP) - #2 Reforpost main glass fiber post relined with composite resin; Double tapered conical glass fiber posts (ExP) - #3 Exacto glass fiber post; and #2 Reforpost main glass fiber + Reforpin accessory glass fiber posts (RrP). In RaP, ExP and RrP, 4.0-mm apical plugs were done with MTA Angelus. The specimens were embedded in polystyrene resin inside cylinders and the periodontal ligament was simulated with a polyether-based impression material. The specimens were submitted to compressive fracture strength test (0.5 mm/min at 135° relative to the long axis of the tooth) in a servo-hydraulic mechanical testing machine MTS 810. Data were subjected to one-way ANOVA and Dunnett's C or Tukey's tests (α=0.05). The control groups (PoC and NeC) showed lower fracture strength than the experimental groups. NeC presented the lowest resistance and ExP presented the highest resistance among the experimental groups. The flaring procedures produced a detrimental effect on the fracture resistance of the bovine teeth. Glass fiber intra-radicular posts increased significantly the fracture resistance of simulated immature teeth.

scholarly journals Effect of glass-fiber post on the biomechanical behavior of teeth with direct veneers

2020 ◽  
Vol 23 (3) ◽  
Author(s):  
Ana Luiza Barbosa Jurema ◽  
Marcela Moreira Penteado ◽  
João Paulo Mendes Tribst ◽  
Taciana Marco Ferraz Caneppele ◽  
Alexandre Luiz Souto Borges
Keyword(s):  
Stress Distribution ◽  
Glass Fiber ◽  
Fiber Post ◽  
Principal Stresses ◽  
Finite Elements Analysis ◽  
Endodontically Treated Teeth ◽  
Element Analysis ◽  
Biomechanical Behavior ◽  
Post And Core Technique ◽  
Glass Fiber Post

Objective: This study aimed to evaluate the biomechanical behaviour of endodontically treated teeth with direct veneer that received or not intra-radicular glass fiber post by finite elements analysis. Material and methods: Six models were designed, varying the presence or absence of glass fiber post and the thickness of direct veneer (0.5, 0.7 and 1 mm). Tridimensional models of maxillary central incisors were obtained with CAD software, Rhinoceros 4.0, and transferred to CAE software, ANSYS 17.2, which a 100N load was applied in a 45° on the lingual surface to simulate functional movements. Geometry contacts were bonded, and the structures were isotropic, linear, elastics, and homogeneous. After coherence and convergence analysis of mashes, the chosen fail criterion was the maximum principal stresses. Results: For cement, glass fiber post, the stress distribution was similar independently of glass fiber post presence or veneer thickness. Models with glass fiber post had better stress distribution and lower values of maximum stress for inner dentin and veneers. Veneers with 0.5 and 1 mm had higher stress concentration areas. Conclusions: It can be concluded that glass fiber post is favorable for restored teeth with direct veneers, and very thin or very thick preparations can damage the biomechanical behavior of restorations.KeywordsDental veneers; Finite element analysis; Nonvital tooth; Post and core technique.

scholarly journals Evaluation of the fracture resistance of remaining thin-walled roots restored with different post systems

2013 ◽  
Vol 1 (3) ◽  
pp. 184
Author(s):  
Luis Gustavo Nunes Dias Pinho ◽  
Gustavo Helder Vinholi ◽  
Tulio Kalife Coelho ◽  
Dimas João Rodrigues Neto ◽  
Daiane Cerutti Kopplin ◽  
...  
Keyword(s):  
Glass Fiber ◽  
Fracture Strength ◽  
Composite Resin ◽  
Compressive Loading ◽  
Test Machine ◽  
Fiber Post ◽  
Cast Metal ◽  
Glass Fiber Post ◽  
Post And Core ◽  
Metal Post

The purpose of this work was evaluating the fracture strength of bovine roots weakened experimentally, restored with two different techniques: internal reinforcement of root canal walls with composite resin and a cast metal post and core or anatomic post (glass fiber post associated with composite resin). Thirty bovine lower central incisive were selected and transversally sectioned, remaining 14 mm of root in order to approximate to the human maxillary central incisive.  A sequence of standardized wear was used to weak the root until the walls remaining achieved from 0.5 to 0.7 mm of thickness at the cervical edge. Two groups were separated randomly (n=15) in order to test the roots reinforced with composite resin associated with cast metal post and core (CMP), or roots restored with composite resin associated to the glass fiber post (GFP). The test were applied in a Universal Test Machine (EMIC) with tangential compressive loading focused on the lingual face of core in an angle of 135° with the long axis of the tooth at a crosshead speed of 0.5 mm/min until failure occurred. The results showed that the fracture strength of remaining roots with weakened walls was influenced by the restorative technique, and the higher values of strength fractures were observed in the group of roots reinforced by composite resin associated with CMP (p<0.001) when compared to the group of roots restored with anatomic post.

scholarly journals Fracture resistance of weakened human premolar roots after use of a glass fiber post together with accessory posts

2014 ◽  
Vol 43 (4) ◽  
pp. 280-285
Author(s):  
Clarissa Estefani SEGATO ◽  
Flávia Lucisano Botelho do AMARAL ◽  
Fabiana Mantovani Gomes FRANÇA ◽  
Flávia Martão FLÓRIO ◽  
Roberta Tarkany BASTING
Keyword(s):  
Glass Fiber ◽  
Fracture Strength ◽  
Statistical Difference ◽  
Resin Composite ◽  
Resin Cement ◽  
Test Machine ◽  
Fiber Post ◽  
Mean Values ◽  
Root Canals ◽  
Glass Fiber Post

OBJECTIVE: To evaluate the fracture strength of human premolar teeth with wide root canals, restored with glass fiber posts and resin cement, together with different numbers of accessory posts.MATERIAL AND METHOD: Thirty-six premolars received standardized preparations that simulated weakened roots, and were divided into three groups (n=12): G0 - glass fiber post (Reforpost/Angelus) cementation with dual cure resin cement (Rely X ARC/3M ESPE); G1 - glass fiber post cementation and one accessory post (Reforpin/Angelus), with dual cure resin cement; G2 - glass fiber post cementation and two accessory posts, with dual cure resin cement. Resin composite cores were placed in each tooth. A metal coping was placed in a standardized position on the cores to perform the compressive tests using a test machine. Testing was performed applying a force parallel to the long axis of the teeth at a speed of 0.5 mm/min. Fracture mode was analyzed under a stereoscopic loupe, classified by scores.RESULT: the Analysis of Variance (ANOVA) was applied, and there was no statistical difference in the mean values of fracture strength among the groups (in kgf): G0 = 91.1 ± 56.9; G1 = 104.7 ± 66.6; G2 = 106.1 ± 51.9. Greater frequency of fracture or cracks was observed in the cervical one-third of the root in the teeth without cemented accessory posts, but no statistical difference was observed among the fracture modes.CONCLUSION: The number of accessory posts cemented into debilitated roots had no influence on either fracture strength or type of fracture of pre-molar roots.

Fracture Strength of Various Types of Large Direct Composite and Indirect Glass Ceramic Restorations

2019 ◽  
Vol 44 (4) ◽  
pp. 433-442 ◽  
Author(s):  
MCFM de Kuijper ◽  
MMM Gresnigt ◽  
M van den Houten ◽  
D Haumahu ◽  
U Schepke ◽  
...  
Keyword(s):  
Glass Fiber ◽  
Fracture Strength ◽  
Lithium Disilicate ◽  
Control Group ◽  
Fiber Post ◽  
Fiber Reinforced Composite ◽  
Composite Restorations ◽  
Reinforced Composite ◽  
Glass Fiber Reinforced ◽  
Glass Fiber Post

SUMMARY Introduction: The objective of this study was to investigate the mechanical behavior of severely compromised endodontically treated molars restored by means of various types of composite buildups, full-contour lithium disilicate crowns (with or without post) or a lithium disilicate endocrown. Methods and Materials: One hundred five sound molars were endodontically treated and randomly assigned to 1 control group (endodontic access cavity only) and 6 experimental groups (n=15): glass fiber reinforced composite (GFRC group), direct microhybrid composite (C group), direct microhybrid composite restoration with glass fiber post (CP group), composite buildup and full-contour lithium disilicate crown (LDS group), additional glass fiber post (P-LDS group), and endocrown (EC group). Molar crowns in the treatment groups were removed 1 mm above the cementoenamel junction and restored. All specimens were thermomechanically aged (1.2×106 cycles at 1.7 Hz/50N, 8000 cycles 5°C to 55°C) and axially loaded until failure. Data were analyzed using analysis of variance and Tukey post hoc test (α=0.05). Results: Fracture strength was significantly affected by the type of restoration (p=0.000; statistically similar groups identified with superscript letters): LDSB (3217±1052 N), P-LDSAB (2697±665 N), ECAB (2425±993 N), CA (2192±752), controlA (1890±774 N), CPA (1830±590 N), and GFRCA (1823±911 N). Group GFRC obtained significantly more repairable fractures than the other groups. Conclusions: Significant differences in fracture strength were obtained between LDS, the composite restorations, and control group. Direct composite restorations showed similar fracture strength as P-LDS and EC. Incorporating a glass fiber reinforced composite resulted in significantly more repairable failures.

Sign in / Sign up

Export Citation Format

Share Document