scholarly journals Bio‐derived sodium silicate for the manufacture of alkali activated binders: use of bamboo leaf ash as silicate source

2022 ◽  
Author(s):  
Raffaele Vinai ◽  
Fabrice Ntimugura ◽  
Will Cutbill ◽  
Robert Evans ◽  
Yize Zhao
Keyword(s):  
Sodium Silicate ◽  
Bamboo Leaf Ash ◽  
Alkali Activated Binders ◽  
Alkali Activated

scholarly journals Effect of Activating Solution Modulus on the Synthesis of Sustainable Geopolymer Binders Using Spent Oil Bleaching Earths as Precursor

2021 ◽  
Vol 13 (13) ◽  
pp. 7501
Author(s):  
P. Delgado-Plana ◽  
A. Rodríguez-Expósito ◽  
S. Bueno-Rodríguez ◽  
L. Pérez-Villarejo ◽  
D. M. Tobaldi ◽  
...  
Keyword(s):  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Room Temperature ◽  
Technological Properties ◽  
Mass Ratio ◽  
Heat Treated ◽  
Lower Porosity ◽  
Alkali Activated Binders ◽  
Alkali Activated ◽  
Activating Solution

The valorization of spent oil bleaching earths (SOBE) is crucial for the protection of the environment and the reuse of resources. In this research, alkali-activated binders were manufactured at room temperature using SOBE as a precursor by varying the mass ratio between the activating solutions of sodium silicate (Na2SiO3) and 6 M sodium hydroxide (NaOH) (activating solution modulus) (Na2SiO3/NaOH ratio = 1/1; 1/2; 1/3; 1/4) to investigate the influence on the technological properties of the materials. This process intends to evaluate the potential of SOBE, heat-treated at 550 °C (1 h), as a precursor of the reaction (source of aluminosilicates). Samples produced with higher amounts of sodium silicate developed a denser structure, with lower porosity and a higher amount of geopolymer gel. Maximum flexural (8.35 MPa) and compressive (28.4 MPa) strengths of samples cured at room temperature for 28 days were obtained with a Na2SiO3/NaOH mass ratio of 1/1. The study demonstrates that SOBE waste can be used as a precursor in the manufacture of geopolymer binders that show a good compromise between physical, mechanical and thermally insulating characteristics.

scholarly journals Effects of EAF-Slag on alkali-activation of tungsten mining waste: mechanical properties

2019 ◽  
Vol 274 ◽  
pp. 01003 ◽  
Author(s):  
Naim Sedira ◽  
João Castro-Gomes
Keyword(s):  
Mechanical Properties ◽  
Sodium Silicate ◽  
Mining Waste ◽  
Alkali Activation ◽  
X Ray Diffraction ◽  
Eaf Slag ◽  
Electric Arc Furnace Slag ◽  
Solid Liquid ◽  
Alkali Activated Binders ◽  
Alkali Activated

The mechanical properties of alkali-activated binders based on blends of tungsten mining waste mud (TMWM) and electric arc furnace slag (EAF-S) were investigated. The synthesis of alkali-activated binders was conducted at 60°C for 24 h with different TMWM/EAF-Slag ratios (90:10, 80:20, 70:30, 60:40, and 50:50 vt.%). Using sodium hydroxide (SH) and sodium silicate (SS) solutions as alkaline activators with ratio solid/liquid 4 by unit of volume, and the sodium silicate to NaOH (SS:SH) ratio of 2:1. The X-ray Diffraction (XRD), mercury intrusion porosimetry (MIP) were determined. The different percentages of the precursors and the alkaline activators were optimised to produce paste samples. The compressive strength of samples with 10 vt.% EAF-Slag was close to 20.7 MPa after 90 curing days. The mechanical properties were further increased up to 30 MPa by increasing the percentage of EAF-Slag to 50 vt.%. This demonstrates a new potential for re-using waste material for various constructional applications.

Effect of AlF3 production waste on the processes of hydration and hardening of the alkali-activated Portland cement with sodium silicate hydrate

2019 ◽  
Vol 138 (2) ◽  
pp. 879-887
Author(s):  
Pavel Krivenko ◽  
Danutė Vaičiukynienė ◽  
Aras Kantautas ◽  
Vitoldas Vaitkevičius ◽  
Evaldas Šerelis
Keyword(s):  
Portland Cement ◽  
Sodium Silicate ◽  
Production Waste ◽  
Alkali Activated

scholarly journals Alkali-Activated Binders Using Bottom Ash from Waste-to-Energy Plants and Aluminium Recycling Waste

2021 ◽  
Vol 11 (9) ◽  
pp. 3840 ◽  
Author(s):  
Alex Maldonado-Alameda ◽  
Jofre Mañosa ◽  
Jessica Giro-Paloma ◽  
Joan Formosa ◽  
Josep Maria Chimenos
Keyword(s):  
Bottom Ash ◽  
Physicochemical Characterization ◽  
Waste To Energy ◽  
Promising Alternative ◽  
Leaching Potential ◽  
Aluminium Recycling ◽  
Alkaline Activator ◽  
Alkali Activated Binders ◽  
Energy Plants ◽  
Alkali Activated

Alkali-activated binders (AABs) stand out as a promising alternative to replace ordinary Portland cement (OPC) due to the possibility of using by-products and wastes in their manufacturing. This paper assessed the potential of weathered bottom ash (WBA) from waste-to-energy plants and PAVAL® (PV), a secondary aluminium recycling process by-product, as precursors of AABs. WBA and PV were mixed at weight ratios of 98/2, 95/5, and 90/10. A mixture of waterglass (WG) and NaOH at different concentrations (4 and 6 M) was used as the alkaline activator solution. The effects of increasing NaOH concentration and PV content were evaluated. Alkali-activated WBA/PV (AA-WBA/PV) binders were obtained. Selective chemical extractions and physicochemical characterization revealed the formation of C-S-H, C-A-S-H, and (N,C)-A-S-H gels. Increasing the NaOH concentration and PV content increased porosity and reduced compressive strength (25.63 to 12.07 MPa). The leaching potential of As and Sb from AA-WBA/PV exceeded the threshold for acceptance in landfills for non-hazardous waste.

scholarly journals Effect of CaSO4 Incorporation on Pore Structure and Drying Shrinkage of Alkali-Activated Binders

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1673 ◽  
Author(s):  
Hyeongmin Son ◽  
Sol Moi Park ◽  
Joon Ho Seo ◽  
Haeng Ki Lee
Keyword(s):  
Fly Ash ◽  
Pore Structure ◽  
Drying Shrinkage ◽  
Phase Changes ◽  
X Ray Diffraction ◽  
Activated Slag ◽  
Capillary Tension ◽  
Alkali Activated Binders ◽  
Internal Pore Structure ◽  
Alkali Activated

This present study investigates the effects of CaSO4 incorporation on the pore structure and drying shrinkage of alkali-activated slag and fly ash. The slag and fly ash were activated at a 5:5 ratio by weighing with a sodium silicate. Thereafter, 0%, 5%, 10%, and 15% of CaSO4 were incorporated to investigate the changes in phase formation and internal pore structure. X-Ray Diffraction (XRD), thermogravimetry (TG)/derivative thermogravimetry (DTG), mercury intrusion porosimetry (MIP), nuclear magnetic resonance (NMR), and drying shrinkage tests were carried out to find the correlation between the pore structure and drying shrinkage of the specimens. The results showed that CaSO4 incorporation increased the formation of thenardite, and these phase changes affected the pore structure of the activated fly ash and slag. The increase in the CaSO4 content increased the pore distribution in the mesopore. As a result, the capillary tension and drying shrinkage decreased.

scholarly journals Positive Influence of Liquid Sodium Silicate on the Setting Time, Polymerization, and Strength Development Mechanism of MSWI Bottom Ash Alkali-Activated Mortars

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1927
Author(s):  
Lei Jin ◽  
Guodong Huang ◽  
Yongyu Li ◽  
Xingyu Zhang ◽  
Yongsheng Ji ◽  
...  
Keyword(s):  
Sodium Silicate ◽  
Setting Time ◽  
Bottom Ash ◽  
Free Water ◽  
Polymerization Reaction ◽  
Liquid Sodium ◽  
Strength Development ◽  
Mswi Bottom Ash ◽  
Alkali Activated ◽  
Development Mechanism

Setting time and mechanical properties are key metrics needed to assess the properties of municipal solid waste incineration (MSWI) bottom ash alkali-activated samples. This study investigated the solidification law, polymerization, and strength development mechanism in response to NaOH and liquid sodium silicate addition. Scanning electron microscopy and X-ray diffraction were used to identify the formation rules of polymerization products and the mechanism of the underlying polymerization reaction under different excitation conditions. The results identify a strongly alkaline environment as the key factor for the dissolution of active substances as well as for the formation of polymerization products. The self-condensation reaction of liquid sodium silicate in the supersaturated state (caused by the loss of free water) is the major reason for the rapid coagulation of alkali-activated samples. The combination of both NaOH and liquid sodium silicate achieves the optimal effect, because they play a compatible coupling role.

scholarly journals Leaching, carbonation and chloride ingress in reinforced alkali-activated fly ash mortars

2018 ◽  
Vol 199 ◽  
pp. 02025 ◽  
Author(s):  
Gregor J. G. Gluth ◽  
Petr Hlaváček ◽  
Steffi Reinemann ◽  
Gino Ebell ◽  
Jürgen Mietz
Keyword(s):  
Fly Ash ◽  
Visual Inspection ◽  
Electrochemical Behaviour ◽  
Transport Coefficients ◽  
Chloride Penetration ◽  
Chloride Ingress ◽  
Reaction Products ◽  
Steel Bars ◽  
Alkali Activated Binders ◽  
Alkali Activated

Alkali-activated fly ash mortars were studied with regard to durability-relevant transport coefficients and the electrochemical behaviour of embedded carbon steel bars on exposure of the mortars to leaching, carbonation and chloride penetration environments. The transport coefficients differed considerably between different formulations, being lowest for a mortar with BFS addition, but still acceptable for one of the purely fly ash-based mortars. Leaching over a period of ~300 days in de-ionized water did not lead to observable corrosion of the embedded steel, as shown by the electrochemical data and visual inspection of the steel. Exposure to 100 % CO2 atmosphere caused steel depassivation within approx. two weeks; in addition, indications of a deterioration of the mortar were observed. The results are discussed in the context of the different reaction products expected in highand low-Ca alkali-activated binders, and the alterations caused by leaching and carbonation.

Sign in / Sign up

Export Citation Format

Share Document