Passive filler loaded polysilazane‐derived glass/ceramic coating system applied to AISI 441 stainless steel, part 1: Processing and characterization

2019 ◽  
Vol 17 (3) ◽  
pp. 998-1009 ◽  
Author(s):  
Ivana Petríková ◽  
Milan Parchovianský ◽  
Peter Švančárek ◽  
Mateus Lenz Leite ◽  
Günter Motz ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Glass Ceramic ◽  
Ceramic Coating ◽  
Steel Part ◽  
Coating System ◽  
Glass Ceramic Coating ◽  
Stainless Steel Part

Study of Glass-Ceramic Coating on the SUS430 Stainless Steel Plate with High Temperature Oxidation Resistance

2018 ◽  
Vol 281 ◽  
pp. 487-492
Author(s):  
Yong Jun Huang ◽  
Shuang Xi Wang ◽  
Wen Jun Wang ◽  
Hai Feng Lan
Keyword(s):  
Stainless Steel ◽  
High Temperature ◽  
Oxidation Resistance ◽  
Glass Ceramic ◽  
High Temperature Oxidation ◽  
Ceramic Coating ◽  
Steel Plate ◽  
Stainless Steel Plate ◽  
Temperature Oxidation ◽  
Glass Ceramic Coating

Currently, the ceramic inner container draws great attention in the field of induction heating pot. Based on the traditional roll-forming process for ceramic pot, a new kind process was proposed to fabricate ceramic inner container and synchronously embed stainless steel plate by one-step high temperature sintering. The key technology for this process is to avoid the oxidation of SUS430 stainless steel plate during the high temperature sintering for a longtime by coating a glass-ceramic layer. In this research, the glass-ceramic coating with excellent high temperature oxidation resistance was optimized. The influences of ZrO2 content in the coating slurry on the high temperature oxidation resistance and thermal shock resistance of SUS430 stainless steel plate with glass-ceramic coating were studied. Meanwhile, the coatings were characterized by Scanning Electron Microscopy, X-ray Diffraction and Thermal Expansion Analysis. The experimental results showed that the glass-ceramic coating was smooth and had excellent thermal shock resistance when the addition of ZrO2 reached 15wt%. The mass gain of the SUS430 stainless steel plate with glass-ceramic coating was only 0.453% after sintering at 1300°C for 10h in air atmosphere, which was less one percent than that of SUS430 stainless steel plate under the same sintering condition.

scholarly journals Improved Oxidation and Hot Corrosion Resistance of 1Cr11Ni2W2MoV Stainless Steel at 650 °C by a Novel Glass-Ceramic Coating

Crystals ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1213
Author(s):  
Ken Chen ◽  
Jiewei Lin ◽  
Wenfang Li ◽  
Wen Zhu ◽  
Kang Li ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Glass Ceramic ◽  
Hot Corrosion ◽  
Ceramic Coating ◽  
Internal Corrosion ◽  
Salt Film ◽  
Glass Ceramic Coating ◽  
Corrosion Zone ◽  
Corrosion Behaviors ◽  
Oxidation And Corrosion

A novel glass-ceramic coating was applied onto the 1Cr11Ni2W2MoV stainless steel. The oxidation and corrosion behaviors of coated and uncoated steels were comparatively investigated in air and in the presence of NaCl + Na2SO4 eutectic deposits at 650 °C, respectively. Protective scales formed on the surface of stainless steel prevented the severe oxidation of the alloy. Catastrophic hot corrosion occurred on the steel when a salt film was attached, producing loose iron oxide layers and internal corrosion zone. The glass-ceramic coating acted as a barrier that effectively hindered the invasion of corrosive species during the oxidation and hot corrosion tests.

Sign in / Sign up

Export Citation Format

Share Document