Estimation of saturated hydraulic conductivity from double-ring infiltrometer measurements

2016 ◽  
Vol 67 (2) ◽  
pp. 135-147 ◽  
Author(s):  
M. Fatehnia ◽  
K. Tawfiq ◽  
M. Ye
Keyword(s):  
Hydraulic Conductivity ◽  
Saturated Hydraulic Conductivity ◽  
Double Ring

Surface-positioned double-ring to improve traditional infiltrometer for measuring soil infiltration

Soil Research ◽  
2020 ◽  
Vol 58 (3) ◽  
pp. 314
Author(s):  
Jing Zhang ◽  
Shaopeng Li
Keyword(s):  
Hydraulic Conductivity ◽  
Measurement Accuracy ◽  
Soil Column ◽  
Saturated Hydraulic Conductivity ◽  
Experimental Results ◽  
Water Infiltration ◽  
Maximum Relative Error ◽  
Wetting Front ◽  
Double Ring ◽  
Improve Measurement

The installation of a traditional double-ring infiltrometer (DRI) into soil is difficult and time consuming. It results in reduced accuracy because of soil disturbance and water leakage along the gaps between the ring wall and the soil. In this study, a surface-positioned DRI (SPDRI) was suggested to improve measurement accuracy and convenience of the DRI. Laboratory experiments were conducted to evaluate performance of the method in terms of the influence of the lateral flow of water on the accuracy of infiltration rate, average vertical wetting front depth and saturated hydraulic conductivity. A cylindrical soil column was used to simulate the ideal ring infiltrometer (IRI) of the one-dimensional vertical infiltration process for comparison purposes. Experimental results indicated that the infiltration rates measured by the SPDRI and IRI were nearly identical, with maximum relative error (RE) of 18.75%. The vertical wetting front depth of the SPDRI was nearly identical to that of the IRI, with proportional coefficients of 0.97 and R2 > 0.95. Comparison of the soil saturated hydraulic conductivity with those from IRI indicated that the REs were 7.05–10.63% for the SPDRI. Experimental results demonstrated that the SPDRI could improve the measurement accuracy and facilitate the soil water infiltration measurement process.

scholarly journals The impact of different tillage treatments on hydraulic conductivity of loamy soil

2012 ◽  
Vol 60 (5) ◽  
pp. 109-114 ◽  
Author(s):  
Ivana Kameníčková ◽  
L. Larišová ◽  
A. Stoklásková
Keyword(s):  
Hydraulic Conductivity ◽  
Conventional Tillage ◽  
Saturated Hydraulic Conductivity ◽  
Water Infiltration ◽  
Reduced Tillage ◽  
Loamy Soil ◽  
Double Ring ◽  
Unsaturated Hydraulic Conductivity ◽  
The Impact

Water infiltration into the soil profile, surface runoff and soil erosion in arable lands depend on the conditions of the top layer. The tillage treatment of the top layer plays a key role in changes of the hydro-physical properties, mainly saturated hydraulic conductivity Ks of the surface layer. The aim of this study was to asses the impact of different tillage treatments on hydraulic conductivity in the locality Bohaté Málkovice. Field experimental works in this area were performed in 2009 and were repeted in 2011 on Haplic Chernozem, medium heavy loamy soil. The experimental area was divided into two parts; top layer of these plots was cultivated by applying conventional and reduced tillage treatment. Both these plots were sown with spring barley (Hordeum vulgare). For the field measurement of water infiltration into the soil was used double-ring infiltrometer (2009, 2011) and Minidisk infiltrometer (2011). Near the point were the infiltration was measured, the soil samples were always collected for laboratory determination of basic physical properties of soil (bulk density, porosity, initial and saturated water content, aeration of the soil) and saturated hydraulic conductivity Ks. For laboratory determination of Ks was used permeameter with constant gradient.For evaluation of saturated hydraulic conductivity Ks using the double-ring infiltration method was used Philip’s three-parameter equation and for evaluation of unsaturated hydraulic conductivity K(h) using Minidisk infiltrometer was used Zang’s method. After two years of using repeatedly applied different tillage treatments was significantly influenced saturated hydraulic conductivity Ks. The Ks value increased approximately six times for reduced tillage and more than three times for conventional tillage. Laboratory determined average values of Ks were compared with the average estimates of Ks from infiltration tests. The results were burdened by a number of errors (compaction, preferential flow). These mean values were higher for conventional and reduced tillage. Unsaturated hydraulic conductivity K(−2cm) for reduced tillage was higher, for conventional tillage decreased approximately three times.

scholarly journals Mapping topsoil field-saturated hydraulic conductivity from point measurements using different methods

2017 ◽  
Vol 65 (3) ◽  
pp. 264-275 ◽  
Author(s):  
Isabelle Braud ◽  
Jean-François Desprats ◽  
Pierre-Alain Ayral ◽  
Christophe Bouvier ◽  
Jean-Pierre Vandervaere
Keyword(s):  
Hydraulic Conductivity ◽  
Land Cover ◽  
Statistical Tests ◽  
Regional Scale ◽  
Saturated Hydraulic Conductivity ◽  
Data Set ◽  
Double Ring ◽  
Gis Data ◽  
Distributed Hydrological Models ◽  
Geological Formations

AbstractTopsoil field-saturated hydraulic conductivity,Kfs, is a parameter that controls the partition of rainfall between infiltration and runoff and is a key parameter in most distributed hydrological models. There is a mismatch between the scale of local in situKfsmeasurements and the scale at which the parameter is required in models for regional mapping. Therefore methods for extrapolating localKfsvalues to larger mapping units are required. The paper explores the feasibility of mappingKfsin the Cévennes-Vivarais region, in south-east France, using more easily available GIS data concerning geology and land cover. Our analysis makes uses of a data set from infiltration measurements performed in the area and its vicinity for more than ten years. The data set is composed ofKfsderived from infiltration measurements performed using various methods: Guelph permeameters, double ring and single ring infiltrotrometers and tension infiltrometers. The different methods resulted in a large variation inKfsup to several orders of magnitude. A method is proposed to pool the data from the different infiltration methods to create an equivalent set ofKfs. Statistical tests showed significant differences inKfsdistributions in function of different geological formations and land cover. Thus the mapping ofKfsat regional scale was based on geological formations and land cover. This map was compared to a map based on the Rawls and Brakensiek (RB) pedotransfer function (mainly based on texture) and the two maps showed very different patterns. The RB values did not fit observed equivalentKfsat the local scale, highlighting that soil texture alone is not a good predictor ofKfs.

scholarly journals Numerical analysis of ponded infiltration experiment under different experimental conditions

2010 ◽  
Vol 4 (Special Issue 2) ◽  
pp. S22-S27 ◽  
Author(s):  
J. Dušek ◽  
M. Dohnal ◽  
T. Vogel
Keyword(s):  
Finite Element ◽  
Hydraulic Conductivity ◽  
Soil Surface ◽  
Infiltration Rate ◽  
Element Model ◽  
Saturated Hydraulic Conductivity ◽  
Finite Element Mesh ◽  
Experimental Conditions ◽  
Element Mesh ◽  
Double Ring

One of the most important properties, affecting the flow regime in the soil profile, is the topsoil saturated hydraulic conductivity (<I>K<SUB>s</SUB></I>). The laboratory-determined <I>K<SUB>s</SUB> </I>often fails to characterise properly the respective field value; the <I>K<SUB>s</SUB> </I>lab estimation requires labour intensive sampling and fixing procedures, difficult to follow in highly structured and stony soils. Thus, simple single- or double-ring ponded infiltration experiments are frequently performed in situ to obtain the field scale information required. In the present study, several important factors, affecting the infiltration rate during the infiltration experiments, are analysed using three-dimensional axisymmetric finite-element model S2D. The examined factors include: (1) the diameter of the infiltration ring, (2) the depth of water in the ring, (3) the depth of the ring insertion under the soil surface, (4) the size and the shape of the finite-element mesh near the ring wall, and (5) the double- vs. single-ring setup. The analysis suggests that the depth of the ring insertion significantly influences the infiltration rate. The simulated infiltration rates also exhibit high sensitivity to the shape of the finite-element mesh near the ring wall. The steady-state infiltration rate, even when considering a double-ring experiment, is significantly higher than the topsoil saturated hydraulic conductivity. The change of the water depth in the outer ring has only a small impact on the infiltration rate in the inner ring.

Saturated Hydraulic Conductivity of Clayey Tills and the Role of Fractures

1990 ◽  
Vol 21 (2) ◽  
pp. 119-132 ◽  
Author(s):  
Johnny Fredericia
Keyword(s):  
Hydraulic Conductivity ◽  
American Studies ◽  
Field Measurements ◽  
Present Knowledge ◽  
Saturated Hydraulic Conductivity ◽  
Field Observations ◽  
Laboratory Measurements ◽  
Vertical Hydraulic Conductivity ◽  
Data Field

The background for the present knowledge about hydraulic conductivity of clayey till in Denmark is summarized. The data show a difference of 1-2 orders of magnitude in the vertical hydraulic conductivity between values from laboratory measurements and field measurements. This difference is discussed and based on new data, field observations and comparison with North American studies, it is concluded to be primarily due to fractures in the till.

Changes over time in near‐saturated hydraulic conductivity of peat soil following reclamation for agriculture

2019 ◽  
Vol 34 (2) ◽  
pp. 237-243
Author(s):  
Jari Hyväluoma ◽  
Mari Räty ◽  
Janne Kaseva ◽  
Riikka Keskinen
Keyword(s):  
Hydraulic Conductivity ◽  
Peat Soil ◽  
Saturated Hydraulic Conductivity ◽  
Changes Over Time ◽  
Over Time

scholarly journals Hydraulic and Swell–Shrink Characteristics of Clay and Recycled Zeolite Mixtures for Liner Construction in Sustainable Waste Landfill

2021 ◽  
Vol 13 (13) ◽  
pp. 7301
Author(s):  
Marcin K. Widomski ◽  
Anna Musz-Pomorska ◽  
Wojciech Franus
Keyword(s):  
Hydraulic Conductivity ◽  
Exchange Capacity ◽  
Saturated Hydraulic Conductivity ◽  
Clay Soils ◽  
Compacted Clay ◽  
Clay Liner ◽  
Compacted Clay Liner ◽  
Drying And Rewetting ◽  
Swelling Characteristics ◽  
Shrinkage And Swelling

This paper presents research considering hydraulic as well as swelling and shrinkage characteristics of potential recycled fine particle materials for compacted clay liner for sustainable landfills. Five locally available clay soils mixed with 10% (by mass) of NaP1 recycled zeolite were tested. The performed analysis was based on determined plasticity, cation exchange capacity, coefficient of saturated hydraulic conductivity after compaction, several shrinkage and swelling characteristics as well as, finally, saturated hydraulic conductivity after three cycles of drying and rewetting of tested specimens and the reference samples. The obtained results showed that addition of zeolite to clay soils allowed reduction in their saturated hydraulic conductivity to meet the required threshold (≤1 × 10−9 m/s) of sealing capabilities for compacted clay liner. On the other hand, an increase in plasticity, swelling, and in several cases in shrinkage, of the clay–zeolite mixture was observed. Finally, none of the tested mixtures was able to sustain its sealing capabilities after three cycles of drying and rewetting. Thus, the studied clayey soils mixed with sustainable recycled zeolite were assessed as promising materials for compacted liner construction. However, the liner should be operated carefully to avoid extensive dissication and cracking.

Sign in / Sign up

Export Citation Format

Share Document