Surface characteristics on commercial dental implants differentially activate macrophages in vitro and in vivo

2021 ◽  
Author(s):  
Jefferson O. Abaricia ◽  
Arth H. Shah ◽  
Marissa N. Ruzga ◽  
Rene Olivares‐Navarrete
Keyword(s):  
Dental Implants ◽  
Surface Characteristics

scholarly journals Influence of Three Dental Implant Surfaces on Cell Viability and Bone Behavior. An In Vitro and a Histometric Study in a Rabbit Model

2020 ◽  
Vol 10 (14) ◽  
pp. 4790
Author(s):  
María Rizo-Gorrita ◽  
Ignacio Fernandez-Asian ◽  
Andreina Garcia-de-Frenza ◽  
Celia Vazquez-Pachon ◽  
Maria-Angeles Serrera-Figallo ◽  
...  
Keyword(s):  
Bone Density ◽  
Cell Viability ◽  
Dental Implants ◽  
Surface Characterization ◽  
Rabbit Model ◽  
Surface Characteristics ◽  
Study Groups ◽  
Bone Response

The chemical composition and the surface characteristics of dental implants are factors that have a decisive effect on the osseointegration process. The surface characterization at the compositional and topographic level of three dental implants available in the market was performed with different surface treatments: (1) sandblasted and acid etched surface (SLA), (2) hydroxyapatite (HA) and tricalcium phosphate (TCP) blasted surface (HA/TCP), and (3) HA-blasted and non-etching acid washed surface (HA + AW). In addition, an in vitro viability study of MG-63 osteoblast cells was performed with a JC-1 test. To complete the study, an in vivo study was conducted in New Zealand rabbits. The study analyzed the histometric characteristics of the bone formed around the implants at the level of area, volume, bone density, accumulated bone density, and bone–implant contact (BIC). The rabbits were sacrificed at 6 weeks after implants were placed in the tibial metaphysis. No statistically significant differences were observed at the level of cell viability or histometric parameters between the different study groups (p > 0.05). SLA and HA/TCP surfaces were the ones that obtained a higher BIC value. Taking into account the limitations of this study, it can be concluded that the different implant surfaces analyzed favor a good bone response.

scholarly journals Comparison of irrigation protocols for the internal decontamination of dental implants – results of in‐vitro and in‐vivo studies

2021 ◽  
Author(s):  
Pia‐Merete Jervøe‐Storm ◽  
Alexandra Selina Hablützel ◽  
Philipp Bartels ◽  
Dominik Kraus ◽  
Søren Jepsen ◽  
...  
Keyword(s):  
Dental Implants ◽  
In Vivo Studies

Zirconia Biocompatibility in Animal Studies - A Systematic Review

2017 ◽  
Vol 376 ◽  
pp. 12-28 ◽  
Author(s):  
Sanda Mihaela Popescu ◽  
Horia Octavian Manolea ◽  
Oana Andreea Diaconu ◽  
Veronica Mercuţ ◽  
Monica Scrieciu ◽  
...  
Keyword(s):  
Systematic Review ◽  
Dental Implants ◽  
Animal Studies ◽  
Case Reports ◽  
Powder Injection ◽  
Mesh Terms ◽  
Meta Analyses ◽  
Abstract Screening

Zirconia is a metal used in dental implantology. Its biocompatibility was studied in vitro and in vivo, results of the studies being analyzed in reviews and meta analyses. The aim of this systematic review was to evaluate biocompatibility of zirconia in animal studies in vivo expressed as results of histomorphometric tests. Databases were searched from 1980 until February 2016, with different combination of the following MeSH terms: zirconium, biocompatibility, dental implants, in vivo, animal studies. Letters to the editors, case reports, commentaries, review articles and articles published in other languages then English were excluded. The search of PubMed, ScienceDirect and Google Scholar databases yielded 690 titles. After abstract screening and duplicate discarding 50 articles were identified and finally, 40 were included in the review. Most of the studies compared zirconia with titanium, a well established material for dental implants. In majority of the studies zirconia showed a similar osseointegration with titanium. Surface implant treatments, like sandblasted and etched zirconia (ZrO2-SLA), alumina toughed zirconia (ATZ), and powder injection molding (PIM) were used to improve osseointegration of zirconia with good results. In the light of histomorphometric test, zirconia, no matter physical and structural forms tested, is a biocompatible material.

A carboxymethyl chitosan and peptide-decorated polyetheretherketone ternary biocomposite with enhanced antibacterial activity and osseointegration as orthopedic/dental implants

2016 ◽  
Vol 4 (10) ◽  
pp. 1878-1890 ◽  
Author(s):  
Anxiu Xu ◽  
Liwei Zhou ◽  
Yi Deng ◽  
Xianshen Chen ◽  
Xiaoling Xiong ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Osteogenic Differentiation ◽  
Dental Implants ◽  
Carboxymethyl Chitosan

A carboxymethyl chitosan and peptide-decorated PEEK ternary biocomposite showed enhanced antibacterial activity, in vitro osteogenic differentiation and in vivo osseointegration.

scholarly journals Nanomodified Peek Dental Implants: Bioactive Composites and Surface Modification—A Review

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Shariq Najeeb ◽  
Zohaib Khurshid ◽  
Jukka Pekka Matinlinna ◽  
Fahad Siddiqui ◽  
Mohammad Zakaria Nassani ◽  
...  
Keyword(s):  
Dental Implants ◽  
Plasma Etching ◽  
Animal Studies ◽  
Relevant Literature ◽  
Melt Blending ◽  
Gas Plasma ◽  
Study Selection ◽  
Bioactive Composites

Purpose. The aim of this review is to summarize and evaluate the relevant literature regarding the different ways how polyetheretherketone (PEEK) can be modified to overcome its limited bioactivity, and thereby making it suitable as a dental implant material.Study Selection. An electronic literature search was conducted via the PubMed and Google Scholar databases using the keywords “PEEK dental implants,” “nano,” “osseointegration,” “surface treatment,” and “modification.” A total of 16in vivoandin vitrostudies were found suitable to be included in this review.Results. There are many viable methods to increase the bioactivity of PEEK. Most methods focus on increasing the surface roughness, increasing the hydrophilicity and coating osseoconductive materials.Conclusion. There are many ways in which PEEK can be modified at a nanometer level to overcome its limited bioactivity. Melt-blending with bioactive nanoparticles can be used to produce bioactive nanocomposites, while spin-coating, gas plasma etching, electron beam, and plasma-ion immersion implantation can be used to modify the surface of PEEK implants in order to make them more bioactive. However, more animal studies are needed before these implants can be deemed suitable to be used as dental implants.

scholarly journals The effect of surface immobilized NBD peptide on osteoclastogenesis of rough titanium plates in vitro and osseointegration of rough titanium implants in ovariectomized rats in vivo

RSC Advances ◽  
2018 ◽  
Vol 8 (40) ◽  
pp. 22853-22865 ◽  
Author(s):  
Yu Wang ◽  
Chen Zhang ◽  
Weijian Xu ◽  
Baixiang Wang ◽  
Yanhua Lan ◽  
...  
Keyword(s):  
Dental Implants ◽  
Titanium Implants ◽  
Ovariectomized Rats ◽  
Nbd Peptide ◽  
Effect Of Surface

Successful osseointegration in dental implants depends on balanced activation of osteoclasts and osteoblasts.

Titanium Surface Modification Techniques for Implant Fabrication – From Microscale to the Nanoscale

2010 ◽  
Vol 5 ◽  
pp. 39-56 ◽  
Author(s):  
Karthikeyan Subramani
Keyword(s):  
Surface Modification ◽  
Dental Implants ◽  
Tio2 Nanotubes ◽  
Titanium Surface ◽  
In Vivo Studies ◽  
Contact Ratio ◽  
Implant Surface ◽  
Surface Modification Techniques

This manuscript reviews about titanium surface modification techniques for its application in orthopaedic and dental implants. There are a few limitations in the long term prognosis of orthopaedic and dental implants. Poor osseointegration with bone, periimplant infection leading to implant failure and short term longevity demanding revision surgery, are to mention a few. Micro- and nanoscale modification of titanium surface using physicochemical, morphological and biochemical approaches have resulted in higher bone to implant contact ratio and improved osseointegration. With recent advances in micro, nano-fabrication techniques and multidisciplinary research studies focusing on bridging biomaterials for medical applications, TiO2 nanotubes have been extensively studied for implant applications. The need for titanium implant surface that can closely mimic the nanoscale architecture of human bone has become a priority. For such purpose, TiO2 nanotubes of different dimensions and architectural fashions at the nanoscale level are being evaluated. This manuscript discusses in brief about the in-vitro and in-vivo studies on titanium surface modification techniques. This manuscript also addresses the recent studies done on such nanotubular surfaces for the effective delivery of osteoinductive growth factors and anti bacterial/ anti inflammatory drugs to promote osseointegration and prevent peri-implant infection.

scholarly journals Role of Stem Cells in Augmenting Dental Implant Osseointegration: A Systematic Review

Coatings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1035
Author(s):  
Mohammed E. Sayed ◽  
Maryam H. Mugri ◽  
Mazen A. Almasri ◽  
Manea Musa Al-Ahmari ◽  
Shilpa Bhandi ◽  
...  
Keyword(s):  
Systematic Review ◽  
Stem Cells ◽  
Bone Formation ◽  
Dental Implants ◽  
Mesenchymal Cells ◽  
Graft Material ◽  
Implant Surface ◽  
Oral Rehabilitation

Dental implants are a widely used treatment modality for oral rehabilitation. Implant failures can be a result of many factors, with poor osseointegration being the main culprit. The present systematic review aimed to assess the effect of stem cells on the osseointegration of dental implants. An electronic search of the MEDLINE, LILACS, and EMBASE databases was conducted. We examined quantitative preclinical studies that reported on the effect of mesenchymal stem cells on bone healing after implant insertion. Eighteen studies that fulfilled the inclusion criteria were included. Various surface modification strategies, sites of placement, and cell origins were analyzed. The majority of the selected studies showed a high risk of bias, indicating that caution must be exercised in their interpretation. All the included studies reported that the stem cells used with graft material and scaffolds promoted osseointegration with higher levels of new bone formation. The mesenchymal cells attached to the implant surface facilitated the expression of bio-functionalized biomaterial surfaces, to boost bone formation and osseointegration at the bone–implant interfaces. There was a promotion of osteogenic differentiation of human mesenchymal cells and osseointegration of biomaterial implants, both in vitro and in vivo. These results highlight the significance of biomodified implant surfaces that can enhance osseointegration. These innovations can improve the stability and success rate of the implants used for oral rehabilitation.

scholarly journals Defining surfaces : Implant topography – a review (Preprint)

2018 ◽  
Author(s):  
Preeti Satheesh Kumar ◽  
Vyoma Venkatesh Grandhi ◽  
Vrinda Gupta
Keyword(s):  
Surface Roughness ◽  
Surface Topography ◽  
Dental Implants ◽  
Sol Gel ◽  
Implant Surface ◽  
Research Publications ◽  
Bone To Implant Contact ◽  
Titanium Dental Implants

BACKGROUND . A variety of claims are made regarding the effects of surface topography on implant osseointegration. The development of implant surfaces topography has been empirical, requiring numerous in vitro and in vivo tests. Most of these tests were not standardized, using different surfaces, cell populations or animal models. The exact role of surface chemistry and topography on the early events of the osseointegration of dental implants remain poorly understood. OBJECTIVE This review considers the major claims made concerning the effects of titanium implant surface topography on osseointegration. The osseointegration rate of titanium dental implants is related to their composition and surface roughness. The different methods used for increasing surface roughness or applying osteoconductive coatings to titanium dental implants are reviewed. Important findings of consensus are highlighted, and existing controversies are revealed. METHODS This review considers many of the research publications listed in MEDLINE and presented in biomedical research publications and textbooks. Surface treatments, such as titanium plasma-spraying, grit-blasting acid-etching,alkaline etching, anodization,polymer demixing ,sol gel conversion and their corresponding surface morphologies and properties are described. RESULTS Many in vitro evaluations are not predictive of or correlated with in vivo outcomes. In some culture models, increased surface topography positively affects pro-osteogenic cellular activities. Many studies reveal increase in bone-to-implant contact,with increased surface topography modifications on implant surfaces. CONCLUSIONS Increased implant surface topography improves the bone-to-implant contact and the mechanical properties of the enhanced interface.

scholarly journals Influence of Biocompatible Coating on Titanium Surface Characteristics

2020 ◽  
Author(s):  
Željka Petrović ◽  
Jozefina Katić ◽  
Ankica Šarić ◽  
Ines Despotović ◽  
Nives Matijaković ◽  
...  
Keyword(s):  
Self Assembly ◽  
Titanium Surface ◽  
Electrochemical Impedance ◽  
Calcium Phosphates ◽  
Artificial Saliva ◽  
Surface Characteristics ◽  
Corrosion Stability ◽  
Assembly Method

Background: Nowadays investigations in the field of dental implants engineering are focused on bioactivity and osseointegration properties.Objective: In this study, the oxide-covered titanium was functionalized by vitamin D3 molecules via a simple self-assembly method with the aim to design more corrosion resistant and at the same time more bioactive surface.Methods: Surface properties of the D3-coated titanium were examined by scanning electron microscopy, attenuated total reflectance Fourier transform infrared spectroscopy, and contact angle measurements, while a long-term corrosion stability during immersion in an artificial saliva solution was investigated in situ by electrochemical impedance spectroscopy.Results: Results of all techniques confirmed a successful formation of the D3 vitamin layer on the oxide-covered titanium. Besides very good corrosion resistivity (~5 MΩcm2 ) the D3-modified titanium surface induced spontaneous formation of biocompatible bone-like calcium phosphates (CaP).Conclusion: Observed in vitro CaP-forming ability as a result of D3-modified titanium/artificial saliva interactions could serve as a promising predictor of in vivo bioactivity of implant materials.

Sign in / Sign up

Export Citation Format

Share Document