Incidence of nasopalatine canal perforation in relation to virtual implant placement: A cone beam computed tomography study

2019 ◽  
Vol 22 (1) ◽  
pp. 77-83
Author(s):  
Aaeshah Alkanderi ◽  
Yacoub Al Sakka ◽  
Tapan Koticha ◽  
Ji Li ◽  
Farah Masood ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Nasopalatine Canal ◽  
Implant Placement

scholarly journals Morphological Characteristics of the Nasopalatine Canal and the Relationship with the Anterior Maxillary Bone—A Cone Beam Computed Tomography Study

Diagnostics ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 915
Author(s):  
Pavle Milanovic ◽  
Dragica Selakovic ◽  
Milica Vasiljevic ◽  
Nemanja U. Jovicic ◽  
Dragan Milovanović ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Morphological Characteristics ◽  
Cone Beam ◽  
Morphometric Characteristics ◽  
Anterior Maxilla ◽  
Nasopalatine Canal ◽  
Implant Placement ◽  
Significant Difference ◽  
Incisive Foramen

The aim of this study was to evaluate the interconnection between the type of nasopalatine canal (NPC) and morphometric characteristics of the anterior maxilla. The investigation involved 113 subjects, and the morphometric parameters were obtained using cone beam computed tomography (CBCT). NPC shapes were classified into four types: banana-, hourglass-, cylindrical-, and funnel-shaped (distribution of approximately 9, 25, 31, and 35%, respectively). The analysis revealed that the NPC shape was significantly connected with the morphometric properties of anterior maxilla horizontal dimensions. In general, a banana-shaped NPC was accompanied with an overall reduction in anterior maxilla diameters when compared to other NPC shapes, with no significant difference between the other three NPC shapes. Furthermore, the morphometric characteristics that depend on NPC shape at the sagittal cross-section were significantly correlated with diameters of the incisive foramen, nasal foramen, and NPC length. According to the results of our study, it seems that the presented analyses of morphometric data may allow useful insight into the algorithms of various interconnections between the measures obtained in the region of the anterior maxilla, which could be of interest for a time rationale approach when planning some surgical procedures, such as immediate dental implant placement planning.

scholarly journals Relationship of central incisor implant placement to the ridge configuration anterior to the nasopalatine canal in dentate and partially edentulous individuals: a comparative study

PeerJ ◽  
2015 ◽  
Vol 3 ◽  
pp. e1315 ◽  
Author(s):  
Xueting Jia ◽  
Wenjie Hu ◽  
Huanxin Meng
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Central Incisor ◽  
Nasopalatine Canal ◽  
Implant Placement ◽  
Bone Width ◽  
Incisive Foramen ◽  
Edentulous Patients ◽  
Bone Height

Background.The aims of this study were to investigate the ridge contour anterior to the nasopalatine canal, and the difference between the incidences of the nasopalatine canal perforation in dentate and partially edentulous patients by cone-beam computed tomography.Methods.Cone-beam computed tomography scan images from 72 patients were selected from database and divided into dentate and partially edentulous groups. The configuration of the ridge anterior to the canal including palatal concavity depth, palatal concavity height, palatal concavity angle, bone height coronal to the incisive foramen, and bone width anterior to the canal was measured. A virtual implant placement procedure was used, and the incidences of perforation were evaluated after implant placement in the cingulum position with the long axis along with the designed crown.Results.Comparing with variable values from dentate patients, the palatal concavity depth and angle were greater by 0.9 mm and 4°, and bone height was shorter by 1.1 mm in partially edentulous patients, respectively. Bone width in edentulous patients was narrower than in dentate patients by 1.2 mm at incisive foramen level and 0.9 mm at 8 mm subcrestal level, respectively. After 72 virtual cylindrical implants (4.1 × 12 mm) were placed, a total of 12 sites (16.7%) showed a perforation and three-fourths occurred in partially edentulous patients. After replacing with 72 tapered implants (4.3 × 13 mm), only 6 implants (8.3%) broke into the canal in the partially edentulous patient group.Conclusions.The nasopalatine canal may get close to the implant site and the bone width anterior to the canal decreases after the central incisor extraction. The incidence of nasopalatine canal perforation may occur more commonly during delayed implant placement in central incisor missing patients.

scholarly journals Anatomy and morphology of the nasopalatine canal using cone-beam computed tomography

2013 ◽  
Vol 43 (4) ◽  
pp. 273 ◽  
Author(s):  
Arpita Rai Thakur ◽  
Krishna Burde ◽  
Kruthika Guttal ◽  
Venkatesh G Naikmasur
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Nasopalatine Canal

scholarly journals Classification of Sagittal Root Position and Angulation of Premolars for Immediate Implant Placement: A Cone Beam Computed Tomography Study

2020 ◽  
Author(s):  
Yalin Zhan ◽  
Miaozhen Wang ◽  
Xueyuan Cheng ◽  
Feng Liu
Keyword(s):  
Computed Tomography ◽  
Treatment Planning ◽  
Frequency Distribution ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Implant Placement ◽  
Root Position ◽  
Immediate Implant ◽  
Maxillary Premolars

Abstract Background: Sagittal root position (SRP) and thickness of buccal plate were of clinical guiding significance in implant treatment planning. The study was to classify the SRP and angulations of the maxillary and mandibular premolar to each osseous housing, and to measure the thickness of buccal plate by cone beam computed tomography (CBCT) in order to estimate the distributions and provide clinical decision support. Methods: CBCT images was reviewed on 150 patients who fulfilled the inclusion criteria. The sagittal root position and angulations of the maxillary and mandibular premolars to their respective osseous housing were evaluated and classified using CBCT images. The thickness of buccal plate at 1 mm, 3 mm, 5 mm apical to the alveolar crest was also measured. Results: The frequency distribution of SRP types indicated that, 41.67%, 51.83%, 3.67%, and 2.83% of maxillary premolars; 84.33%, 15%, 0%, and 0.67% of mandibular premolars were classified as type B, M, L, and N. The frequency distribution of angulation classifications indicated that, 20.83%, 46%, 32.17%, and 1% of maxillary premolars; 2%, 5.33%, 36.67%, and 56% of mandibular premolars were classified as class 1, 2, 3, and 4. The buccal bone thickness in most locations of premolar sites was less than 1 mm. Conclusions: The classification of clinical relevance of SRP and angulation of the premolar root to osseous housing would help for treatment planning and improving interdisciplinary communication of immediate implant placement (IIP) in the premolar region.

scholarly journals The nasopalatine canal and its relationship with the maxillary central incisors: a cone-beam computed tomography study

2021 ◽  
Vol 10 (15) ◽  
pp. e351101522978
Author(s):  
Ana Carolina Neves Melgaço de Lima ◽  
Dominique A. Peniche ◽  
Thais M. C. Coutinho ◽  
Fábio R. Guedes ◽  
Maria Augusta Visconti ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Average Diameter ◽  
Cone Beam ◽  
Nasopalatine Canal ◽  
Gender And Age ◽  
Post Test ◽  
Male Patients ◽  
And Gender ◽  
Student’S T

Objective: To evaluate the dimensions of the nasopalatine canal (NPC) and its relationship with the maxillary central incisors (MCI) using cone-beam computed tomography (CBCT) and to determine variations in the NPC in relation to age and gender. Methods: CBCT scans from 333 patients (67% female; 35.9 ± 14.6 years) were included. The CBCT scan was analyzed to determine the length and diameter of the NPC, the distance between the NPC and the MCI, and to evaluate the morphology of the NPC. The data were analyzed using the independent Student's t-test, the Mann–Whitney and Kruskal–Wallis tests, and Dunn's post-test (p < 0.05). Results: The average diameter and length of the NPC were 2.92 ± 0.91 mm and 12.67 ± 3.32 mm, respectively. The minimum and maximum distance between the MCI and the NPC were 0.78 ± 0.42 mm and 2.56 ± 1.38 mm, respectively. The NPC of male patients was greater in length compared with the female patients (p < 0.05). The majority presented a funnel-like morphology (34.1%), followed by a cylindrical morphology (27.5%). Conclusions: There was variability in the dimensions of the NPC and its relationship with the MCI, which was influenced by gender and age.

scholarly journals Presurgical Cone Beam Computed Tomography Bone Quality Evaluation for Predictable Immediate Implant Placement and Restoration in Esthetic Zone

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Corina Marilena Cristache
Keyword(s):  
Computed Tomography ◽  
Bone Quality ◽  
Cone Beam Computed Tomography ◽  
Quality Evaluation ◽  
Multislice Computed Tomography ◽  
Cone Beam ◽  
Implant Placement ◽  
Lower Radiation Dose ◽  
Cad Cam ◽  
Immediate Implant

Despite numerous advantages over multislice computed tomography (MSCT), including a lower radiation dose to the patient, shorter acquisition times, affordable cost, and sometimes greater detail with isotropic voxels used in reconstruction, allowing precise measurements, cone beam computed tomography (CBCT) is still controversial regarding bone quality evaluation. This paper presents a brief review of the literature on accuracy and reliability of bone quality assessment with CBCT and a case report with step-by-step predictable treatment planning in esthetic zone, based on CBCT scans which enabled the clinician to evaluate, depending on bone volume and quality, whether immediate restoration with CAD-CAM manufactured temporary crown and flapless surgery may be a treatment option.

scholarly journals Comparative Evaluation of Cortical Bone Anatomy of Mandibular Buccal Shelf for Mini Implant Placement in Different Facial Divergence: A Cone Beam Computed Tomography Study

2020 ◽  
Vol 54 (4) ◽  
pp. 325-331
Author(s):  
Kalyani Trivedi ◽  
Bharvi K Jani ◽  
Sagar Hirani ◽  
Mansi V Radia
Keyword(s):  
Computed Tomography ◽  
Cortical Bone ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Bone Surface ◽  
Bone Thickness ◽  
Second Molar ◽  
Cortical Bone Thickness ◽  
Implant Placement ◽  
Alveolar Crest

Aim: The purpose of this study was to use measurements from cone beam computed tomography scans to quantify the cortical bone thickness of mandibular buccal shelf region and preferable site for buccal shelf implant placement in 10 hyperdivergent and 10 hypodivergent patients. Method: 20 cone beam computed tomographies were equally divided based on divergence. 6 sites were examined: mesial of first molar (6M), middle of first molar (6Mi), interdental between the first and second molar (Id), mesial of second molar (7M), middle of second molar (7Mi), and distal of second molar (7D). The study quantified the mandibular buccal shelf relative to its angle of slope, the cortical bone thickness measured perpendicular to the bone surface, the amount of cortical bone 30° angle to the bone surface. The cortical bone thickness was measured perpendicular and at a 30° angle at 3, 5, and 7 mm from the alveolar crest. Result: Significant change is seen at the buccal shelf slope at 6M ( P = .001) and further increase in this angle till 7D ( P = .003). Mean amount of cortical bone for hyperdivergent group at 7D is 4.77 ± 0.68 mm and for hypodivergent group is 3.86 ± 0.70 mm. Statistically significant differences were noted at insertion site at 90° and 30° for both groups at 3, 5, and 7 mm from the alveolar crest. Conclusion: Preferable site for buccal shelf implant placement is distal to the mandibular second molar. The maximum amount of cortical bone is found distal to the second molar 7 mm vertically from alveolar crest when the buccal shelf implant is placed at 30° angulation for hyperdivergent group.

Sign in / Sign up

Export Citation Format

Share Document