The effects of antenna gains and polarization on multipath delay spread and path loss at 918 MHz on cross-campus radio links

2003 ◽  
Author(s):  
T.S. Rappaport ◽  
J.C. Liberti ◽  
K.L. Blackard ◽  
B. Tuch
Keyword(s):  
Path Loss ◽  
Delay Spread ◽  
Multipath Delay

scholarly journals Survey of Millimeter-Wave Propagation Measurements and Models in Indoor Environments

Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1653
Author(s):  
Ahmed Al-Saman ◽  
Michael Cheffena ◽  
Olakunle Elijah ◽  
Yousef A. Al-Gumaei ◽  
Sharul Kamal Abdul Rahim ◽  
...  
Keyword(s):  
Millimeter Wave ◽  
Measurement Techniques ◽  
Path Loss ◽  
Delay Spread ◽  
Indoor Environments ◽  
Future Trends ◽  
Signal Loss ◽  
Indoor Wireless ◽  
The Future ◽  
Future Demands

The millimeter-wave (mmWave) is expected to deliver a huge bandwidth to address the future demands for higher data rate transmissions. However, one of the major challenges in the mmWave band is the increase in signal loss as the operating frequency increases. This has attracted several research interests both from academia and the industry for indoor and outdoor mmWave operations. This paper focuses on the works that have been carried out in the study of the mmWave channel measurement in indoor environments. A survey of the measurement techniques, prominent path loss models, analysis of path loss and delay spread for mmWave in different indoor environments is presented. This covers the mmWave frequencies from 28 GHz to 100 GHz that have been considered in the last two decades. In addition, the possible future trends for the mmWave indoor propagation studies and measurements have been discussed. These include the critical indoor environment, the roles of artificial intelligence, channel characterization for indoor devices, reconfigurable intelligent surfaces, and mmWave for 6G systems. This survey can help engineers and researchers to plan, design, and optimize reliable 5G wireless indoor networks. It will also motivate the researchers and engineering communities towards finding a better outcome in the future trends of the mmWave indoor wireless network for 6G systems and beyond.

scholarly journals Broadband Wireless Channel in Composite High-Speed Railway Scenario: Measurements, Simulation, and Analysis

2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Jianwen Ding ◽  
Lei Zhang ◽  
Jingya Yang ◽  
Bin Sun ◽  
Jiying Huang
Keyword(s):  
Ray Tracing ◽  
Communication Systems ◽  
High Speed ◽  
Channel Model ◽  
High Reliability ◽  
Rapid Development ◽  
Path Loss ◽  
Wireless Channel ◽  
Delay Spread ◽  
High Speed Railway

The rapid development of high-speed railway (HSR) and train-ground communications with high reliability, safety, and capacity promotes the evolution of railway dedicated mobile communication systems from Global System for Mobile Communications-Railway (GSM-R) to Long Term Evolution-Railway (LTE-R). The main challenges for LTE-R network planning are the rapidly time-varying channel and high mobility, because HSR lines consist of a variety of complex terrains, especially the composite scenarios where tunnels, cuttings, and viaducts are connected together within a short distance. Existing researches mainly focus on the path loss and delay spread for the individual HSR scenarios. In this paper, the broadband measurements are performed using a channel sounder at 950 MHz and 2150 MHz in a typical HSR composite scenario. Based on the measurements, the pivotal characteristics are analyzed for path loss exponent, power delay profile, and tap delay line model. Then, the deterministic channel model in which the 3D ray-tracing algorithm is applied in the composite scenario is presented and validated by the measurement data. Based on the ray-tracing simulations, statistical analysis of channel characteristics in delay and Doppler domain is carried out for the HSR composite scenario. The research results can be useful for radio interface design and optimization of LTE-R system.

The 5-GHz Airport Surface Area Channel—Part I: Measurement and Modeling Results for Large Airports

2008 ◽  
Vol 57 (4) ◽  
pp. 2014-2026 ◽  
Author(s):  
David W. Matolak ◽  
Indranil Sen ◽  
Wenhui Xiong
Keyword(s):  
Path Loss ◽  
Correlation Coefficients ◽  
Line Of Sight ◽  
Delay Spread ◽  
Rms Delay Spread ◽  
Amplitude Data ◽  
Amplitude Correlation ◽  
5 Ghz ◽  
Best Fit ◽  
Probability Density Function Pdf

We describe results from a channel measurement and modeling campaign for the airport surface environment in the 5-GHz band. Using a 50-MHz bandwidth test signal, thousands of power delay profiles (PDPs) were obtained and processed to develop empirical tapped-delay line statistical channel models for large airports. A log-distance path loss model was also developed. The large airport surface channel is classified into three propagation regions, and models are presented for each of the regions for two values of bandwidth. Values of the median root-mean-square (RMS) delay spread range from 500 to 1000 ns for these airports, with the 90 th percentile RMS delay spreads being approximately 1.7 ms. Corresponding correlation bandwidths (i.e., correlation value 1/2) range from approximately 1.5 MHz in non-line-of-sight (NLOS) settings to 17.5 MHz in line-of-sight (LOS) settings. Two types of statistical nonstationarity were also observed: 1) multipath component persistence and 2) propagation region transitions. We provide the multipath component probability of occurrence models and describe Markov chains that are used for modeling both phenomena. Channel tap amplitude statistics are also provided, using the flexible Weibull probability density function (pdf). This pdf was found to best fit fading tap amplitude data, particularly for frequently observed severe fading, which is characterized by fade probabilities that are worse than the commonly used Rayleigh model. Fading parameters equivalent to Nakagami-m-model values ofmnear 0.7 were often observed (withm= 1 being Rayleigh and m < 1 being worse than Rayleigh). We also provide channel tap amplitude correlation coefficients, which typically range from 0.1 to 0.4 but occasionally take values greater than 0.7.

scholarly journals NLOS Path Loss Model for Low-Height Antenna Links in High-Rise Urban Street Grid Environments

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Juyul Lee ◽  
Myung-Don Kim ◽  
Hyun Kyu Chung ◽  
Jinup Kim
Keyword(s):  
Path Loss ◽  
Field Measurements ◽  
Propagation Path ◽  
Delay Spread ◽  
Communication Link ◽  
Channel Measurements ◽  
Loss Model ◽  
Path Loss Model ◽  
Power Delay Profile ◽  
High Rise

This paper presents a NLOS (non-line-of-sight) path loss model for low-height antenna links in rectangular street grids to account for typical D2D (device-to-device) communication link situations in high-rise urban outdoor environments. From wideband propagation channel measurements collected in Seoul City at 3.7 GHz, we observed distinctive power delay profile behaviors between 1-Turn and 2-Turn NLOS links: the 2-Turn NLOS has a wider delay spread. This can be explained by employing the idea that the 2-Turn NLOS has multiple propagation paths along the various street roads from TX to RX, whereas the 1-Turn NLOS has a single dominant propagation path from TX to RX. Considering this, we develop a path loss model encompassing 1-Turn and 2-Turn NLOS links with separate scattering and diffraction parameters for the first and the second corners, based on the Uniform Geometrical Theory of Diffraction. In addition, we consider the effect of building heights on path loss by incorporating an adjustable “waveguide effect” parameter; that is, higher building alleys provide better propagation environments. When compared with field measurements, the predictions are in agreement.

scholarly journals Propagation Path Loss Modeling and Outdoor Coverage Measurements Review in Millimeter Wave Bands for 5G Cellular Communications

2018 ◽  
Vol 8 (4) ◽  
pp. 2254 ◽  
Author(s):  
Mohammed B. Majed ◽  
Tharek A. Rahman ◽  
Omar Abdul Aziz
Keyword(s):  
Communication Networks ◽  
Millimeter Wave ◽  
Wide Spectrum ◽  
Path Loss ◽  
Separation Distance ◽  
Propagation Path ◽  
Delay Spread ◽  
Propagation Time ◽  
60 Ghz ◽  
Rms Delay Spread

The global bandwidth inadequacy facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks, and mmWave band is one of the promising candidates due to wide spectrum. This paper presents propagation path loss and outdoor coverage and link budget measurements for frequencies above 6 GHz (mm-wave bands) using directional horn antennas at the transmitter and omnidirectional antennas at the receiver. This work presents measurements showing the propagation time delay spread and path loss as a function of separation distance for different frequencies and antenna pointing angles for many types of real-world environments. The data presented here show that at 28 GHz, 38 GHz and 60 GHz, unobstructed Line of Site (LOS) channels obey free space propagation path loss while non-LOS (NLOS) channels have large multipath delay spreads and can utilize many different pointing angles to provide propagation links. At 60 GHz, there is more path loss and smaller delay spreads. Power delay profiles PDPs were measured at every individual pointing angle for each TX and RX location, and integrating each of the PDPs to obtain received power as a function of pointing angle. The result shows that the mean RMS delay spread varies between 7.2 ns and 74.4 ns for 60 GHz and 28 GHz respectively in NLOS scenario.

scholarly journals Analysis of Propagation Characteristics for Various Subway Tunnel Scenarios at 28 GHz

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Chengjian Wang ◽  
Wenli Ji ◽  
Guoxin Zheng ◽  
Asad Saleem
Keyword(s):  
Ray Tracing ◽  
Root Mean Square ◽  
Millimeter Wave ◽  
Measurement Data ◽  
Path Loss ◽  
Small Scale ◽  
Delay Spread ◽  
Mean Square ◽  
Propagation Characteristics ◽  
Subway Tunnels

In order to meet the higher data transmission rate requirements of subway communication services, the millimeter wave (mmWave) broadband communication is considered as a potential solution in 5G technology. Based on the channel measurement data in subway tunnels, this paper uses ray-tracing (RT) simulation to predict the propagation characteristics of the 28 GHz millimeter wave frequency band in different tunnel scenarios. A large number of simulations based on ray-tracing software have been carried out for tunnel models with different bending radiuses and different slopes, and we further compared the simulation results with the real time measurement data of various subway tunnels. The large-scale and small-scale propagation characteristics of the channel, such as path loss (PL), root mean square delay spread (RMS-DS), and angle spread (AS), for different tunnel scenarios are analyzed, and it was found that the tunnel with a greater slope causes larger path loss and root mean square delay spread. Furthermore, in the curved tunnel, the angle spread of the azimuth angle is larger than that in a straight tunnel. The proposed results can provide a reference for the design of future 5G communication systems in subway tunnels.

scholarly journals Utilization of an OLED-Based VLC System in Office, Corridor, and Semi-Open Corridor Environments

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6869
Author(s):  
Zahra Nazari Chaleshtori ◽  
Zabih Ghassemlooy ◽  
Hossien B. Eldeeb ◽  
Murat Uysal ◽  
Stanislav Zvanovec
Keyword(s):  
Indoor Localization ◽  
Low Cost ◽  
Flexible Substrate ◽  
Path Loss ◽  
Visual Display ◽  
Outer Wall ◽  
Channel Gain ◽  
Delay Spread ◽  
Indoor Environments ◽  
Visible Light Communications

Organic light emitting diodes (OLEDs) have recently received growing interest for their merits as soft light and large panels at a low cost for the use in public places such as airports, shopping centers, offices, and train or bus stations. Moreover, the flexible substrate-based OLEDs provide an attractive feature of having curved or rolled lighting sources for the use in wearable devices and display panels. This technology can be implemented in visible light communications (VLC) for several applications such as visual display, data communications, and indoor localization. This article aims to investigate the use of flexible OLED-based VLC in indoor environments (i.e., office, corridor and semi-open corridor in shopping malls). We derive a two-term power series model to be match with the root-mean-square delay spread and optical path loss (OPL). We show that, for OLED positioned on outer-wall of shops, the channel gain is enhanced in contrast to them being positioned on the inner-wall. Moreover, the channel gain in empty environments is higher compare with the furnished rooms. We show that, the OPL for a 10 m link span are lower by 4.4 and 6.1 dB for the empty and semi-open corridors compared with the furnished rooms, when OLED is positioned on outer-wall of shops. Moreover, the channel gain in the corridor is higher compared with the semi-open corridor. We also show that, in furnished and semi-open corridors the OPL values are 55.6 and 57.2 dB at the center of corridor increasing to 87.6 and 90.7 dB at 20 m, respectively, when OLED is positioned on outer-wall of shops.

Sign in / Sign up

Export Citation Format

Share Document