P1J-2 Electromechanical Coupling Coefficient k15 and Crystallites Alignment of (1120) Textured ZnO Films

2006 ◽  
Author(s):  
M. Matsukawa ◽  
T. Yanagitani ◽  
M. Kiuchi ◽  
Y. Watanabe
Keyword(s):  
Coupling Coefficient ◽  
Electromechanical Coupling ◽  
Electromechanical Coupling Coefficient ◽  
Zno Films

The Investigation of Preferred Orientation Growth of ZnO Films on the Ceramic Substrates

2003 ◽  
Vol 764 ◽  
Author(s):  
Sheng-Yuan Chu ◽  
Te-Yi Chen ◽  
Walter Water ◽  
Tung-Yi Huang
Keyword(s):  
Coupling Coefficient ◽  
Gas Flow ◽  
Electromechanical Coupling ◽  
Electromechanical Coupling Coefficient ◽  
Zno Films ◽  
Ceramic Substrates ◽  
Force Microscopy ◽  
Atomic Force ◽  
Gas Flow Ratio ◽  
Temperature Coefficient Of Frequency

AbstractPoly-crystal ZnO films with c-axis (002) orientation have been successfully grown on the lead-based ceramic substrates by r.f. magnetron sputtering technique. The deposited films were characterized as a function of deposition time and argon-oxygen gas flow ratio. Crystalline structures of the films were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). Highly oriented films with c-axis normal to the substrates can be obtained by depositing under a total pressure of 10mTorr containing 50% argon and 50% oxygen and r.f. power of 70W for 3 hours. The phase velocity, electromechanical coupling coefficient and temperature coefficient of frequency of SAW device with ZnO/IDT/PT-ceramic structure were investigated. It shows that the preferred oriented ZnO film is beneficial for improving the electromechanical coupling coefficient of SAW device.

Shear mode electromechanical coupling coefficient k15 and crystallites alignment of (112¯0) textured ZnO films

2007 ◽  
Vol 102 (2) ◽  
pp. 024110 ◽  
Author(s):  
Takahiko Yanagitani ◽  
Masato Kiuchi ◽  
Mami Matsukawa ◽  
Yoshiaki Watanabe
Keyword(s):  
Coupling Coefficient ◽  
Electromechanical Coupling ◽  
Electromechanical Coupling Coefficient ◽  
Zno Films ◽  
Shear Mode

Sb5+ Modified Phase Transition in (Li, Na, K)(Nb1-xSbx)O3 Piezoelectric Ceramics

2016 ◽  
Vol 848 ◽  
pp. 339-343
Author(s):  
Xiao Kun Zhao ◽  
Bo Ping Zhang ◽  
Lei Zhao ◽  
Li Feng Zhu
Keyword(s):  
Phase Transition ◽  
Phase Boundary ◽  
Coupling Coefficient ◽  
Electromechanical Coupling ◽  
Piezoelectric Coefficient ◽  
Electromechanical Coupling Coefficient ◽  
Second Phase ◽  
Phase Transition Temperatures ◽  
Two Peaks ◽  
Planar Mode

The modified behavior of the phase transition temperatures (TO-T and/or TC) between orthorhombic (O), tetragonal (T) and cubic (C) that caused by doping Sb5+ in (Li0.052Na0.493K0.455)(Nb1-xSbx)O3 (LNKNSx) ceramics was reported in the present investigation. The results show that differing from the insensitive TO-T to the Sb5+ content, TC splits into two peaks TCI and TCII when doping Sb5+. The decreased TCI by raising x may be ascribed to the Sb-rich grains and the settled TCII round 480 °C resulting from the Sb-lack ones. The enhanced piezoelectric coefficient d33 value of 263 pC/N and planar mode electromechanical coupling coefficient kp value of 42.5% at x=0.052 can be attributed to the polymorphic phase boundary (PPB) behavior with an appropriate ratio between T and O phases without any second phase.

scholarly journals Combined piezoelectric and flexoelectric effects in resonant dynamics of nanocantilevers

2018 ◽  
Vol 29 (20) ◽  
pp. 3949-3959 ◽  
Author(s):  
Adriane G Moura ◽  
Alper Erturk
Keyword(s):  
Barium Titanate ◽  
Frequency Response ◽  
Coupling Coefficient ◽  
Electromechanical Coupling ◽  
Analytical Framework ◽  
Electromechanical Coupling Coefficient ◽  
Sensors And Actuators ◽  
Energy Harvesters ◽  
Size Dependent ◽  
Resonant Dynamics

We establish and analyze an analytical framework by accounting for both the piezoelectric and flexoelectric effects in bimorph cantilevers. The focus is placed on the development of governing electroelastodynamic piezoelectric–flexoelectric equations for the problems of resonant energy harvesting, sensing, and actuation. The coupled governing equations are analyzed to obtain closed-form frequency response expressions via modal analysis. The combined piezoelectric–flexoelectric coupling coefficient expression is identified and its size dependence is explored. Specifically, a typical atomistic value of the flexoelectric constant for barium titanate is employed in the model simulations along with its piezoelectric constant from the existing literature. It is shown that the effective electromechanical coupling of a piezoelectric material, such as barium titanate, is significantly enhanced for thickness levels below 100 nm. The electromechanical coupling coefficient of a barium titanate bimorph cantilever increases from the bulk piezoelectric value of 0.065 to the combined piezoelectric–flexoelectric value exceeding 0.3 toward nanometer thickness level. Electromechanical frequency response functions for resonant power generation and dynamic actuation also capture the size-dependent enhancement of the electromechanical coupling. The analytical framework given here can be used for parameter identification and design of nanoscale cantilevers that can be used as energy harvesters, sensors, and actuators.

Sign in / Sign up

Export Citation Format

Share Document