5F-1 Analytical Models for Micromachined Transducers - An Overview (Invited)

2006 ◽  
Author(s):  
P.-C. Eccardt ◽  
P. Wagner ◽  
S. Hansen
Keyword(s):  
Analytical Models ◽  
Micromachined Transducers

Mechanism of irregular crack-propagation in thermal controlled fracture of ceramics induced by microwave

2020 ◽  
Vol 21 (6) ◽  
pp. 610
Author(s):  
Xiaoliang Cheng ◽  
Chunyang Zhao ◽  
Hailong Wang ◽  
Yang Wang ◽  
Zhenlong Wang
Keyword(s):  
Crack Propagation ◽  
Industrial Application ◽  
Ceramic Materials ◽  
Advanced Technology ◽  
Analytical Models ◽  
Propagation Mechanism ◽  
Unstable Crack ◽  
Fracture Simulation ◽  
Initial Stage ◽  
Controlled Fracture

Microwave cutting glass and ceramics based on thermal controlled fracture method has gained much attention recently for its advantages in lower energy-consumption and higher efficiency than conventional processing method. However, the irregular crack-propagation is problematic in this procedure, which hinders the industrial application of this advanced technology. In this study, the irregular crack-propagation is summarized as the unstable propagation in the initial stage, the deviated propagation in the middle stage, and the non-penetrating propagation in the end segment based on experimental work. Method for predicting the unstable propagation in the initial stage has been developed by combining analytical models with thermal-fracture simulation. Experimental results show good agreement with the prediction results, and the relative deviation between them can be <5% in cutting of some ceramics. The mechanism of deviated propagation and the non-penetrating propagation have been revealed by simulation and theoretical analysis. Since this study provides effective methods to predict unstable crack-propagation in the initial stage and understand the irregular propagation mechanism in the whole crack-propagation stage in microwave cutting ceramics, it is of great significance to the industrial application of thermal controlled fracture method for cutting ceramic materials using microwave.

Classifying the Past: Discriminant Analysis and its Application to Medieval Farming Systems

1996 ◽  
Vol 8 (1) ◽  
pp. 1-10 ◽  
Author(s):  
Ken Bartley
Keyword(s):  
Cluster Analysis ◽  
Discriminant Analysis ◽  
Processing Time ◽  
Farming Systems ◽  
Frame Of Reference ◽  
Analytical Models ◽  
Successful Implementation ◽  
Medieval Period ◽  
The Past ◽  
Livestock Management

This paper discusses the need for nationally based analytical models of the medieval period. The use of cluster analysis as a method for classifying demesne farms, by the crops they grew and their livestock management, is explained. Successful implementation of cluster analysis requires both the existence of a large base sample, to permit isolation of specific groupings within the data, and access to considerable processing time. The paper concludes by demonstrating how discriminant analysis can provide an efficient and systematic way of classifying even a single manor within a national frame of reference.

Validation of a Belt Model for Prediction of Hub Forces from a Rolling Tire4

2009 ◽  
Vol 37 (2) ◽  
pp. 62-102 ◽  
Author(s):  
C. Lecomte ◽  
W. R. Graham ◽  
D. J. O’Boy
Keyword(s):  
Internal Pressure ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Prediction Method ◽  
Analytical Models ◽  
Beam Model ◽  
Impedance Boundary ◽  
Bending Waves ◽  
Tire Rotation ◽  
Three Dimensional Models

Abstract An integrated model is under development which will be able to predict the interior noise due to the vibrations of a rolling tire structurally transmitted to the hub of a vehicle. Here, the tire belt model used as part of this prediction method is first briefly presented and discussed, and it is then compared to other models available in the literature. This component will be linked to the tread blocks through normal and tangential forces and to the sidewalls through impedance boundary conditions. The tire belt is modeled as an orthotropic cylindrical ring of negligible thickness with rotational effects, internal pressure, and prestresses included. The associated equations of motion are derived by a variational approach and are investigated for both unforced and forced motions. The model supports extensional and bending waves, which are believed to be the important features to correctly predict the hub forces in the midfrequency (50–500 Hz) range of interest. The predicted waves and forced responses of a benchmark structure are compared to the predictions of several alternative analytical models: two three dimensional models that can support multiple isotropic layers, one of these models include curvature and the other one is flat; a one-dimensional beam model which does not consider axial variations; and several shell models. Finally, the effects of internal pressure, prestress, curvature, and tire rotation on free waves are discussed.

Investigations of Road Wear Caused by Studded Tires

2014 ◽  
Vol 42 (1) ◽  
pp. 2-15
Author(s):  
Johannes Gültlinger ◽  
Frank Gauterin ◽  
Christian Brandau ◽  
Jan Schlittenhard ◽  
Burkhard Wies
Keyword(s):  
Traffic Safety ◽  
Test Bench ◽  
Operating Conditions ◽  
Test Method ◽  
Analytical Models ◽  
The Road ◽  
Driving Speed ◽  
Major Factors ◽  
Tire Friction ◽  
Variable Operating Conditions

ABSTRACT The use of studded tires has been a subject of controversy from the time they came into market. While studded tires contribute to traffic safety under severe winter conditions by increasing tire friction on icy roads, they also cause damage to the road surface when running on bare roads. Consequently, one of the main challenges in studded tire development is to reduce road wear while still ensuring a good grip on ice. Therefore, a research project was initiated to gain understanding about the mechanisms and influencing parameters involved in road wear by studded tires. A test method using the institute's internal drum test bench was developed. Furthermore, mechanisms causing road wear by studded tires were derived from basic analytical models. These mechanisms were used to identify the main parameters influencing road wear by studded tires. Using experimental results obtained with the test method developed, the expected influences were verified. Vehicle driving speed and stud mass were found to be major factors influencing road wear. This can be explained by the stud impact as a dominant mechanism. By means of the test method presented, quantified and comparable data for road wear caused by studded tires under controllable conditions can be obtained. The mechanisms allow predicting the influence of tire construction and variable operating conditions on road wear.

Carbonate Rock Physics: Analytical Models and Validations Using Computational Approaches and Lab/Log Measurements

2007 ◽  
Author(s):  
Shiyu Xu ◽  
Ganglin Chen ◽  
Yaping Zhu ◽  
Jie Zhang ◽  
Michael Payne ◽  
...  
Keyword(s):  
Carbonate Rock ◽  
Rock Physics ◽  
Analytical Models ◽  
Computational Approaches

Mathematical modeling of elastoplastic deformation of tubular energy-absorbing elements under static and impact loading

2020 ◽  
pp. 78-82
Author(s):  
A.Р. Evdokimov ◽  
A.N. Gromyiko ◽  
A.A. Mironov
Keyword(s):  
Mathematical Modeling ◽  
Impact Loading ◽  
Elastoplastic Deformation ◽  
Shock Absorber ◽  
Analytical Models ◽  
Dynamic Impact ◽  
Shock Absorbers ◽  
Energy Absorbing ◽  
Absorbing Elements

Analytical models of static and dynamic impact elastoplastic deformation of tubular energy-absorbing elements constituting a tubular plastic shock absorber are proposed. The developed models can be used for the calculation and design of these shock absorbers. Keywords static and dynamic elastoplastic deformation, mathematical modeling, tubular energy-absorbing element, tubular plastic shock absorber, impact loading. [email protected]

Sign in / Sign up

Export Citation Format

Share Document