A Novel Signal Processing Technique for Ku-Band Automobile FMCW Fully Polarimetric SAR System Using Triangular LFM

2021 ◽  
Vol 70 ◽  
pp. 1-10
Author(s):  
Dae-Hwan Jung ◽  
Do-Hoon Kim ◽  
Muhammad Tayyab Azim ◽  
Junhyeong Park ◽  
Seong-Ook Park
Keyword(s):  
Signal Processing ◽  
Processing Technique ◽  
Polarimetric Sar ◽  
Signal Processing Technique ◽  
Ku Band

scholarly journals A Remote Sensor System Based on TDLAS Technique for Ammonia Leakage Monitoring

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2448
Author(s):  
Hongbin Lu ◽  
Chuantao Zheng ◽  
Lei Zhang ◽  
Zhiwei Liu ◽  
Fang Song ◽  
...  
Keyword(s):  
Signal Processing ◽  
Limit Of Detection ◽  
Processing Technique ◽  
Tunable Diode Laser ◽  
Sensor System ◽  
Signal Processing Technique ◽  
Suppression Effect ◽  
Output Wavelength ◽  
Deviation Analysis ◽  
Remote Sensor

The development of an efficient, portable, real-time, and high-precision ammonia (NH3) remote sensor system is of great significance for environmental protection and citizens’ health. We developed a NH3 remote sensor system based on tunable diode laser absorption spectroscopy (TDLAS) technique to measure the NH3 leakage. In order to eliminate the interference of water vapor on NH3 detection, the wavelength-locked wavelength modulation spectroscopy technique was adopted to stabilize the output wavelength of the laser at 6612.7 cm−1, which significantly increased the sampling frequency of the sensor system. To solve the problem in that the light intensity received by the detector keeps changing, the 2f/1f signal processing technique was adopted. The practical application results proved that the 2f/1f signal processing technique had a satisfactory suppression effect on the signal fluctuation caused by distance changing. Using Allan deviation analysis, we determined the stability and limit of detection (LoD). The system could reach a LoD of 16.6 ppm·m at an average time of 2.8 s, and a LoD of 0.5 ppm·m at an optimum averaging time of 778.4 s. Finally, the measurement result of simulated ammonia leakage verified that the ammonia remote sensor system could meet the need for ammonia leakage detection in the industrial production process.

scholarly journals Application of UAV in Search and Rescue Actions in Underground Mine—A Specific Sound Detection in Noisy Acoustic Signal

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3725
Author(s):  
Paweł Zimroz ◽  
Paweł Trybała ◽  
Adam Wróblewski ◽  
Mateusz Góralczyk ◽  
Jarosław Szrek ◽  
...  
Keyword(s):  
Signal Processing ◽  
Acoustic Signal ◽  
Processing Technique ◽  
Underground Mine ◽  
Search And Rescue ◽  
Reference Spectrum ◽  
Signal Processing Technique ◽  
Time Frequency ◽  
Communication Device ◽  
Frequency Representation

The possibility of the application of an unmanned aerial vehicle (UAV) in search and rescue activities in a deep underground mine has been investigated. In the presented case study, a UAV is searching for a lost or injured human who is able to call for help but is not able to move or use any communication device. A UAV capturing acoustic data while flying through underground corridors is used. The acoustic signal is very noisy since during the flight the UAV contributes high-energetic emission. The main goal of the paper is to present an automatic signal processing procedure for detection of a specific sound (supposed to contain voice activity) in presence of heavy, time-varying noise from UAV. The proposed acoustic signal processing technique is based on time-frequency representation and Euclidean distance measurement between reference spectrum (UAV noise only) and captured data. As both the UAV and “injured” person were equipped with synchronized microphones during the experiment, validation has been performed. Two experiments carried out in lab conditions, as well as one in an underground mine, provided very satisfactory results.

scholarly journals Thermal Modulation of a High-Bandwidth Gas Sensor Array in Real-Time for Application on a Mobile Robot

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 858 ◽  
Author(s):  
Timothy A. Vincent ◽  
Yuxin Xing ◽  
Marina Cole ◽  
Julian W. Gardner
Keyword(s):  
Signal Processing ◽  
Mobile Robot ◽  
Real Time ◽  
Low Cost ◽  
Processing Technique ◽  
Signal Processing Technique ◽  
Baseline Drift ◽  
Gas Sensor Array ◽  
Sensor Module ◽  
High Bandwidth

A new signal processing technique has been developed for resistive metal oxide (MOX) gas sensors to enable high-bandwidth measurements and enhanced selectivity at PPM levels (<50 PPM VOCs). An embedded micro-heater is thermally pulsed from 225 to 350 °C, which enables the chemical reactions in the sensor film (e.g., SnO2, WO3, NiO) to be extracted using a fast Fourier transform. Signal processing is performed in real-time using a low-cost microcontroller integrated into a sensor module. The approach enables the remove of baseline drift and is resilient to environmental temperature changes. Bench-top experimental results are presented for 50 to 200 ppm of ethanol and CO, which demonstrate our sensor system can be used within a mobile robot.

scholarly journals Potential of Empirical Mode Decomposition for Hilbert Demodulation of Acoustic Emission Signals in Gearbox Diagnostics

2021 ◽  
Author(s):  
Félix Leaman ◽  
Cristián Molina Vicuña ◽  
Elisabeth Clausen
Keyword(s):  
Signal Processing ◽  
Acoustic Emission ◽  
Fault Diagnosis ◽  
Bandpass Filter ◽  
Processing Technique ◽  
Signal Processing Technique ◽  
Mode Decomposition ◽  
Gear Fault ◽  
Envelope Spectrum ◽  
Ae Signals

Abstract Background The acoustic emission (AE) analysis has been used increasingly for gearbox diagnostics. Since AE signals are of non-linear, non-stationary and broadband nature, traditional signal processing techniques such as envelope spectrum must be carefully applied to avoid a wrong fault diagnosis. One signal processing technique that has been used to enhance the demodulation process for vibration signals is the empirical mode decomposition (EMD). Until now, the combination of both techniques has not yet been used to improve the fault diagnostics in gearboxes using AE signals. Purpose In this research we explore the use of the EMD to improve the demodulation process of AE signals using the Hilbert transform and enhance the representation of a gear fault in the envelope spectrum. Methods AE signals were measured on a planetary gearbox (PG) with a ring gear fault. A comparative signal analysis was conducted for the envelope spectra of the original AE signals and the obtained intrinsic mode functions (IMFs) considering three types of filters: highpass filter in the whole AE range, bandpass filter based on IMF spectra analysis and bandpass filter based on the fast kurtogram. Results It is demonstrated how the results of the envelope spectrum analysis can be improved by the selection of the relevant frequency band of the IMF most affected by the fault. Moreover, not considering a complementary signal processing technique such as the EMD prior the calculation of the envelope of AE signals can lead to a wrong fault diagnosis in gearboxes. Conclusion The EMD has the potential to reveal frequency bands in AE signals that are most affected by a fault and improve the demodulation process of these signals. Further research shall focus on overcome issues of the EMD technique to enhance its application to AE signals.

scholarly journals Signal Processing Technique for Time Domain Measurement of S-Parameters

2016 ◽  
Vol 15 (2) ◽  
pp. 105-114 ◽  
Author(s):  
Isabela M. Nobre ◽  
Julio L. Nicolini ◽  
Joaquim D. Garcia ◽  
Marbey Mosso
Keyword(s):  
Signal Processing ◽  
Time Domain ◽  
Processing Technique ◽  
Signal Processing Technique ◽  
S Parameters
Sign in / Sign up

Export Citation Format

Share Document