Hybrid Time-Variant Frequency Response Function Estimates Using Multiple Sets of Basis Functions

2017 ◽  
Vol 66 (2) ◽  
pp. 263-279 ◽  
Author(s):  
Tao Song ◽  
Defu Lin
Keyword(s):  
Frequency Response ◽  
Response Function ◽  
Frequency Response Function ◽  
Basis Functions ◽  
Variant Frequency

scholarly journals Wavelet-Based Frequency Response Function: Comparative Study of Input Excitation

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
K. Dziedziech ◽  
W. J. Staszewski ◽  
T. Uhl
Keyword(s):  
Experimental Data ◽  
Wavelet Transform ◽  
Comparative Study ◽  
Frequency Response ◽  
Response Function ◽  
Frequency Response Function ◽  
Simulated Data ◽  
Continuous Wavelet ◽  
Variant Frequency ◽  
The Comparative Study

Time-variant systems can be found in many areas of engineering. It is widely accepted that the classical Fourier-based methods are not suitable for the analysis and identification of such systems. The time-variant frequency response function—based on the continuous wavelet transform—is used in this paper for the analysis of time-variant systems. The focus is on the comparative study of various broadband input excitations. The performance of the method is tested using simulated data from a simple MDOF system and experimental data from a frame-like structure.

scholarly journals Road Roughness Estimation Based on the Vehicle Frequency Response Function

Actuators ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 89
Author(s):  
Qingxia Zhang ◽  
Jilin Hou ◽  
Zhongdong Duan ◽  
Łukasz Jankowski ◽  
Xiaoyang Hu
Keyword(s):  
Frequency Response ◽  
Response Function ◽  
Frequency Response Function ◽  
Gaussian White Noise ◽  
Estimation Method ◽  
Time Shift ◽  
Ride Quality ◽  
The Road ◽  
Road Roughness ◽  
Measured Response

Road roughness is an important factor in road network maintenance and ride quality. This paper proposes a road-roughness estimation method using the frequency response function (FRF) of a vehicle. First, based on the motion equation of the vehicle and the time shift property of the Fourier transform, the vehicle FRF with respect to the displacements of vehicle–road contact points, which describes the relationship between the measured response and road roughness, is deduced and simplified. The key to road roughness estimation is the vehicle FRF, which can be estimated directly using the measured response and the designed shape of the road based on the least-squares method. To eliminate the singular data in the estimated FRF, the shape function method was employed to improve the local curve of the FRF. Moreover, the road roughness can be estimated online by combining the estimated roughness in the overlapping time periods. Finally, a half-car model was used to numerically validate the proposed methods of road roughness estimation. Driving tests of a vehicle passing over a known-sized hump were designed to estimate the vehicle FRF, and the simulated vehicle accelerations were taken as the measured responses considering a 5% Gaussian white noise. Based on the directly estimated vehicle FRF and updated FRF, the road roughness estimation, which considers the influence of the sensors and quantity of measured data at different vehicle speeds, is discussed and compared. The results show that road roughness can be estimated using the proposed method with acceptable accuracy and robustness.

scholarly journals Predicting Dam Flood Discharge Induced Ground Vibration with Modified Frequency Response Function

Water ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 144
Author(s):  
Yan Zhang ◽  
Jijian Lian ◽  
Songhui Li ◽  
Yanbing Zhao ◽  
Guoxin Zhang ◽  
...  
Keyword(s):  
Frequency Response ◽  
Frequency Distribution ◽  
Response Function ◽  
Frequency Response Function ◽  
Ground Vibration ◽  
Vibration Source ◽  
Ground Vibrations ◽  
High Energies ◽  
Flood Discharge ◽  
Opening Method

Ground vibrations induced by large flood discharge from a dam can damage surrounding buildings and impact the quality of life of local residents. If ground vibrations could be predicted during flood discharge, the ground vibration intensity could be mitigated by controlling or tuning the discharge conditions by, for example, changing the flow rate, changing the opening method of the orifice, and changing the upstream or downstream water level, thereby effectively preventing damage. This study proposes a prediction method with a modified frequency response function (FRF) and applies it to the in situ measured data of Xiangjiaba Dam. A multiple averaged power spectrum FRF (MP-FRF) is derived by analyzing four major factors when the FRF is used: noise, system nonlinearity, spectral leakages, and signal latency. The effects of the two types of vibration source as input are quantified. The impact of noise on the predicted amplitude is corrected based on the characteristics of the measured signal. The proposed method involves four steps: signal denoising, MP-FRF estimation, vibration prediction, and noise correction. The results show that when the vibration source and ground vibrations are broadband signals and two or more bands with relative high energies, the frequency distribution of ground vibration can be predicted with MP-FRF by filtering both the input and output. The amplitude prediction loss caused by filtering can be corrected by adding a constructed white noise signal to the prediction result. Compared with using the signal at multiple vibration sources after superimposed as input, using the main source as input improves the accuracy of the predicted frequency distribution. The proposed method can predict the dominant frequency and the frequency bands with relative high energies of the ground vibration downstream of Xiangjiaba Dam. The predicted amplitude error is 9.26%.

Sign in / Sign up

Export Citation Format

Share Document