On the signal-to-noise ratio and short-term stability of passive rubidium frequency standards

1981 ◽  
Vol IM-30 (4) ◽  
pp. 277-282 ◽  
Author(s):  
Jacques Vanier ◽  
Laurent-Guy Bernier
Keyword(s):  
Signal To Noise Ratio ◽  
Signal To Noise ◽  
Short Term ◽  
Term Stability ◽  
Frequency Standards ◽  
Noise Ratio

Detection and Recognition of Stop Consonants by Normal.Hearing and Hearing Impaired Listeners

1992 ◽  
Vol 35 (4) ◽  
pp. 942-949 ◽  
Author(s):  
Christopher W. Turner ◽  
David A. Fabry ◽  
Stephanie Barrett ◽  
Amy R. Horwitz
Keyword(s):  
Signal To Noise Ratio ◽  
Recognition Performance ◽  
Normal Hearing ◽  
Hearing Impaired ◽  
Stop Consonants ◽  
Signal To Noise ◽  
Short Term ◽  
Masking Noise ◽  
Noise Ratio ◽  
Detection And Recognition

This study examined the possibility that hearing-impaired listeners, in addition to displaying poorer-than-normal recognition of speech presented in background noise, require a larger signal-to-noise ratio for the detection of the speech sounds. Psychometric functions for the detection and recognition of stop consonants were obtained from both normal-hearing and hearing-impaired listeners. Expressing the speech levels in terms of their short-term spectra, the detection of consonants for both subject groups occurred at the same signal-to-noise ratio. In contrast, the hearing-impaired listeners displayed poorer recognition performance than the normal-hearing listeners. These results imply that the higher signal-to-noise ratios required for a given level of recognition by some subjects with hearing loss are not due in part to a deficit in detection of the signals in the masking noise, but rather are due exclusively to a deficit in recognition.

scholarly journals A Blind Spectrum Sensing Method Based on Deep Learning

Sensors ◽  
2019 ◽  
Vol 19 (10) ◽  
pp. 2270 ◽  
Author(s):  
Kai Yang ◽  
Zhitao Huang ◽  
Xiang Wang ◽  
Xueqiong Li
Keyword(s):  
Neural Networks ◽  
Deep Learning ◽  
Spectrum Sensing ◽  
Short Term Memory ◽  
Signal To Noise Ratio ◽  
Signal To Noise ◽  
Short Term ◽  
Term Memory ◽  
Long Short Term Memory ◽  
Noise Ratio

Spectrum sensing is one of the technologies that is used to solve the current problem of low utilization of spectrum resources. However, when the signal-to-noise ratio is low, current spectrum sensing methods cannot well-handle a situation in which the prior information of the licensed user signal is lacking. In this paper, a blind spectrum sensing method based on deep learning is proposed that uses three kinds of neural networks together, namely convolutional neural networks, long short-term memory, and fully connected neural networks. Experiments show that the proposed method has better performance than an energy detector, especially when the signal-to-noise ratio is low. At the same time, this paper also analyzes the effect of different long short-term memory layers on detection performance, and explores why the deep-learning-based detector can achieve better performance.

Mechanism for optimization of signal-to-noise ratio of dopamine release based on short-term bidirectional plasticity

2017 ◽  
Vol 1667 ◽  
pp. 68-73
Author(s):  
Claudio Da Cunha ◽  
Eric McKimm ◽  
Rafael M. Da Cunha ◽  
Suelen L. Boschen ◽  
Peter Redgrave ◽  
...  
Keyword(s):  
Dopamine Release ◽  
Signal To Noise Ratio ◽  
Signal To Noise ◽  
Short Term ◽  
Noise Ratio

scholarly journals A MODWT-Based Algorithm for the Identification and Removal of Jumps/Short-Term Distortions in Displacement Measurements Used for Structural Health Monitoring

IoT ◽  
2021 ◽  
Vol 3 (1) ◽  
pp. 60-72
Author(s):  
Davi V. Q. Rodrigues ◽  
Delong Zuo ◽  
Changzhi Li
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Signal To Noise Ratio ◽  
Structural Condition ◽  
Signal To Noise ◽  
Short Term ◽  
Structural Health ◽  
Noise Ratio ◽  
Displacement Measurements

Researchers have made substantial efforts to improve the measurement of structural reciprocal motion using radars in the last years. However, the signal-to-noise ratio of the radar’s received signal still plays an important role for long-term monitoring of structures that are susceptible to excessive vibration. Although the prolonged monitoring of structural deflections may provide paramount information for the assessment of structural condition, most of the existing structural health monitoring (SHM) works did not consider the challenges to handle long-term displacement measurements when the signal-to-noise ratio of the measurement is low. This may cause discontinuities in the detected reciprocal motion and can result in wrong assessments during the data analyses. This paper introduces a novel approach that uses a wavelet-based multi-resolution analysis to correct short-term distortions in the calculated displacements even when previously proposed denoising techniques are not effective. Experimental results are presented to validate and demonstrate the feasibility of the proposed algorithm. The advantages and limitations of the proposed approach are also discussed.

Automatic Phase‐Picking Method for Detecting Earthquakes Based on the Signal‐to‐Noise‐Ratio Concept

2019 ◽  
Vol 91 (1) ◽  
pp. 334-342
Author(s):  
Jihua Fu ◽  
Xu Wang ◽  
Zhitao Li ◽  
Hao Meng ◽  
Jianjun Wang ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Ratio Method ◽  
Mean Deviation ◽  
Signal To Noise ◽  
Short Term ◽  
Low Snr ◽  
Automatic Phase ◽  
Noise Ratio ◽  
Automatic Phase Picking

Abstract The automatic phase‐picking detection of earthquakes is a challenge under the background of big data and strong noise circumstances. The short‐term average/long‐term average (STA/LTA) ratio is widely used to detect earthquake due to its simplicity and robustness. However, STA/LTA‐based methods may not perform well with noisy data. Based on the signal‐to‐noise‐ratio (SNR) concept, a short‐term power/long‐term power (STP/LTP) ratio method is proposed. The characteristic function and the detection thresholds of the STP/LTP method are given physical meanings. Through a sample analysis, the STP/LTP detection results of both the P and S phases are better than the results of the STA/LTA by means of mean deviation, standard deviations, distributions of detection results, error rate, and missed rate on different SNR levels. In general, the STP/LTP method inherits the simple characteristics of the STA/LTA method, and it is suitable for phase picking of low‐SNR seismic data.

scholarly journals A Two-Level Speaker Identification System via Fusion of Heterogeneous Classifiers and Complementary Feature Cooperation

Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5097
Author(s):  
Mohammad Al-Qaderi ◽  
Elfituri Lahamer ◽  
Ahmad Rad
Keyword(s):  
Speaker Identification ◽  
Signal To Noise Ratio ◽  
Support Vector ◽  
Spectral Features ◽  
Prosodic Features ◽  
Signal To Noise ◽  
Short Term ◽  
Classifier System ◽  
Cepstral Coefficients ◽  
Noise Ratio

We present a new architecture to address the challenges of speaker identification that arise in interaction of humans with social robots. Though deep learning systems have led to impressive performance in many speech applications, limited speech data at training stage and short utterances with background noise at test stage present challenges and are still open problems as no optimum solution has been reported to date. The proposed design employs a generative model namely the Gaussian mixture model (GMM) and a discriminative model—support vector machine (SVM) classifiers as well as prosodic features and short-term spectral features to concurrently classify a speaker’s gender and his/her identity. The proposed architecture works in a semi-sequential manner consisting of two stages: the first classifier exploits the prosodic features to determine the speaker’s gender which in turn is used with the short-term spectral features as inputs to the second classifier system in order to identify the speaker. The second classifier system employs two types of short-term spectral features; namely mel-frequency cepstral coefficients (MFCC) and gammatone frequency cepstral coefficients (GFCC) as well as gender information as inputs to two different classifiers (GMM and GMM supervector-based SVM) which in total leads to construction of four classifiers. The outputs from the second stage classifiers; namely GMM-MFCC maximum likelihood classifier (MLC), GMM-GFCC MLC, GMM-MFCC supervector SVM, and GMM-GFCC supervector SVM are fused at score level by the weighted Borda count approach. The weight factors are computed on the fly via Mamdani fuzzy inference system that its inputs are the signal to noise ratio and the length of utterance. Experimental evaluations suggest that the proposed architecture and the fusion framework are promising and can improve the recognition performance of the system in challenging environments where the signal-to-noise ratio is low, and the length of utterance is short; such scenarios often arise in social robot interactions with humans.

Determination of the Best Emulsion for the Microscopy of Crystals

1981 ◽  
Vol 39 ◽  
pp. 32-33
Author(s):  
David A. Grano ◽  
Kenneth H. Downing
Keyword(s):  
Spatial Frequency ◽  
Information Transfer ◽  
Signal To Noise Ratio ◽  
Experimental Situation ◽  
Photographic Emulsion ◽  
Modulation Transfer ◽  
Signal To Noise ◽  
Frequency Space ◽  
Noise Ratio

The retrieval of high-resolution information from images of biological crystals depends, in part, on the use of the correct photographic emulsion. We have been investigating the information transfer properties of twelve emulsions with a view toward 1) characterizing the emulsions by a few, measurable quantities, and 2) identifying the “best” emulsion of those we have studied for use in any given experimental situation. Because our interests lie in the examination of crystalline specimens, we've chosen to evaluate an emulsion's signal-to-noise ratio (SNR) as a function of spatial frequency and use this as our critereon for determining the best emulsion.The signal-to-noise ratio in frequency space depends on several factors. First, the signal depends on the speed of the emulsion and its modulation transfer function (MTF). By procedures outlined in, MTF's have been found for all the emulsions tested and can be fit by an analytic expression 1/(1+(S/S0)2). Figure 1 shows the experimental data and fitted curve for an emulsion with a better than average MTF. A single parameter, the spatial frequency at which the transfer falls to 50% (S0), characterizes this curve.

Experiments in Bright-Field Imaging with Hollow-Cone Illumination

1981 ◽  
Vol 39 ◽  
pp. 226-227
Author(s):  
W. Kunath ◽  
K. Weiss ◽  
E. Zeitler
Keyword(s):  
Signal To Noise Ratio ◽  
Carbon Support ◽  
Electronic System ◽  
Optic Axis ◽  
Hollow Cone ◽  
Signal To Noise ◽  
Bright Field ◽  
Noise Ratio ◽  
Single Field ◽  
Field Imaging

Bright-field images taken with axial illumination show spurious high contrast patterns which obscure details smaller than 15 ° Hollow-cone illumination (HCI), however, reduces this disturbing granulation by statistical superposition and thus improves the signal-to-noise ratio. In this presentation we report on experiments aimed at selecting the proper amount of tilt and defocus for improvement of the signal-to-noise ratio by means of direct observation of the electron images on a TV monitor.Hollow-cone illumination is implemented in our microscope (single field condenser objective, Cs = .5 mm) by an electronic system which rotates the tilted beam about the optic axis. At low rates of revolution (one turn per second or so) a circular motion of the usual granulation in the image of a carbon support film can be observed on the TV monitor. The size of the granular structures and the radius of their orbits depend on both the conical tilt and defocus.

Information capacity and bandwidth limitations in the SEM

1989 ◽  
Vol 47 ◽  
pp. 84-85
Author(s):  
D. C. Joy ◽  
R. D. Bunn
Keyword(s):  
Signal To Noise Ratio ◽  
Critical Dimension ◽  
Information Capacity ◽  
Acquisition Time ◽  
Signal To Noise ◽  
Sem Image ◽  
Probe Size ◽  
Minimum Number ◽  
Noise Ratio ◽  
Signal Channel

The information available from an SEM image is limited both by the inherent signal to noise ratio that characterizes the image and as a result of the transformations that it may undergo as it is passed through the amplifying circuits of the instrument. In applications such as Critical Dimension Metrology it is necessary to be able to quantify these limitations in order to be able to assess the likely precision of any measurement made with the microscope.The information capacity of an SEM signal, defined as the minimum number of bits needed to encode the output signal, depends on the signal to noise ratio of the image - which in turn depends on the probe size and source brightness and acquisition time per pixel - and on the efficiency of the specimen in producing the signal that is being observed. A detailed analysis of the secondary electron case shows that the information capacity C (bits/pixel) of the SEM signal channel could be written as :

Sign in / Sign up

Export Citation Format

Share Document