A Novel Technique to Compensate Voltage Sags in Multiline Distribution System—The Interline Dynamic Voltage Restorer

2006 ◽  
Vol 53 (5) ◽  
pp. 1603-1611 ◽  
Author(s):  
D. Vilathgamuwa ◽  
H.M. Wijekoon ◽  
S.S. Choi
Keyword(s):  
Distribution System ◽  
Voltage Sags ◽  
Dynamic Voltage Restorer ◽  
Novel Technique ◽  
Voltage Restorer ◽  
Dynamic Voltage

scholarly journals Design and simulation of Dynamic Voltage Restorer (DVR) supported by solar panels

2021 ◽  
pp. 31-36
Author(s):  
Omar Antonio-Lara ◽  
Pedro Martín García-Vite ◽  
Rafael Castillo-Gutiérrez ◽  
Hermenegildo Cisneros-Villegas
Keyword(s):  
Distribution System ◽  
Control Algorithm ◽  
Controller Design ◽  
Voltage Sags ◽  
Solar Panels ◽  
Dynamic Voltage Restorer ◽  
Voltage Restorer ◽  
Voltage Compensation ◽  
Dynamic Voltage ◽  
Mathematical Techniques

This work presents the design and simulation of a Dynamic Voltage Restorer (DVR) to mitigate power quality problems such as voltage sags and swells at sensitive loads to these types of disturbances, but with a compensation topology using one the most popular of the renewable energies, currently employed, which is photovoltaic solar energy. The DVR must operate with a control loop, monitoring the voltage at the load side and generating the voltage for compensation during the disturbances. The energy is obtained, from an array of solar panels for the injection of active power. The control algorithm discussed in this article is based on the Clark and Park transformations to generate the required signals for voltage compensation, these mathematical techniques allow fixing the variables and hence simplicity for the controller design. The results of the simulation in MATLAB/Simulink are used to show the performance of the proposed topology with symmetrical voltage sags in the distribution system.

Performance Study of Dynamic Voltage Restorer (DVR) in Order to Power Quality Improvement

2012 ◽  
Vol 622-623 ◽  
pp. 1830-1834 ◽  
Author(s):  
Mojtaba Hakimzadeh ◽  
Reza Sedaghati
Keyword(s):  
Power Quality ◽  
Distribution System ◽  
Distribution Networks ◽  
Voltage Sag ◽  
Voltage Sags ◽  
Performance Study ◽  
Dynamic Voltage Restorer ◽  
Voltage Restorer ◽  
Dynamic Voltage ◽  
Types Of Faults

Power quality has become an increasingly important topic in the performance of many industrial applications. One of the major issues in improving power quality in distribution networks is the mitigation of voltage sags. Voltage sag can be mitigated by voltage and power injections into the distribution system using Dynamic Voltage Restorer (DVR). The DVR is a powerful controller that is commonly used for voltage sags mitigation at the point of connection. This paper describes of modeling and analysis of DVR. Different types of faults are applied for DVR in distribution network and the responses of the system for these disturbances are examined. Simulation results obtained in PSCAD/EMTDC also prove that the DVR can mitigate voltage sag and protect bus bar voltage from various types of faults.

scholarly journals Compansation of Electrical Voltage in Distribution System by Dynamic Voltage Restorer

2019 ◽  
Vol 3 (2) ◽  
Author(s):  
Soe Soe Ei Aung ◽  
May Phone Thit
Keyword(s):  
Power Electronics ◽  
Power Quality ◽  
Distribution System ◽  
Voltage Sag ◽  
Voltage Sags ◽  
Dynamic Voltage Restorer ◽  
Load Voltage ◽  
Electrical Voltage ◽  
Voltage Restorer ◽  
Dynamic Voltage

Electrical ac power systems consist of generation systems, transmission and distribution networks. The large three phase industrial loads at various distribution and transmission voltages as well as single-phase residential and commercial loads are supplied by the networks. Nowadays, the power quality such as voltage sags/swell, transient interrupts and harmonic distortions in sinusoidal waveforms are concerned with most of the electrical loads. The power quality problems such as voltage sags, swells and harmonics are caused by the widespread using of power electronics devices in power system. In this paper, electrical voltage sags/swells of power quality problems are considered because this problem is one of the most severe disturbances to the industrial equipment of distribution system. Thus, mitigation of these voltages in distribution system is necessary. So, series connected power electronics based device such as Dynamic Voltage Restorer (DVR) is chosen to compensate these voltage for mitigating quickly the voltage sag/swell in the system and restoring the load voltage to the nominal value. For case study, Myaungtagar industrial zone is chosen due to furnaces and large motor drives that cause the common problems such as voltage sag/swell in this system. In this paper, performance analysis of voltage sag/swell compensation of power distribution system with Dynamic Voltage Restorer (DVR) under various fault conditions is carried out. The proposed configuration model uses MATLAB/SIMULINK and the performance of voltage compensation and restoration of load voltage to the nominal value with DVR under various fault conditions is verified by the simulation results.

The Design of Regional Compensation DVR in Medium Voltage System

2014 ◽  
Vol 654 ◽  
pp. 146-155
Author(s):  
Zheng Guo Zhu ◽  
Hua Ying Zhang ◽  
Sen Jing Yao ◽  
Jun Wei Cao ◽  
Jin Tao Yang
Keyword(s):  
Calculation Method ◽  
Distribution System ◽  
Reference Voltage ◽  
Voltage Sags ◽  
Dynamic Voltage Restorer ◽  
Medium Voltage ◽  
System A ◽  
Voltage Restorer ◽  
Dynamic Voltage ◽  
Simulation Results

The design of a Dynamic Voltage Restorer that is suitable for compensating regional voltage sags in 10kV distribution system is introduced in this paper. The design of the main circuit based on cascaded H-bridge, the device for energize DVR and the transformer-less coupled circuit are presented. For the voltage sags in neutral point non-grounded system, a reference voltage calculation method with the aim is to restore the line voltages on the load side is put forward. The simulation model of a substation including the designed DVR device has been built in PSCAD, and the compensation results under different fault types are simulated and analyzed, the influence of the energize device on the distribution system is studied. The simulation results verify the correctness and effectiveness of the design of DVR hardware and the reference voltage calculation method.

scholarly journals Protection of Sensitive Loads in Distribution Systems Using a BSFCL-DVR System

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1615
Author(s):  
Mehdi Firouzi ◽  
Saleh Mobayen ◽  
Hossein Shahbabaei Kartijkolaie ◽  
Mojtaba Nasiri ◽  
Chih-Chiang Chen
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Fault Current ◽  
Dynamic Voltage Restorer ◽  
Voltage Quality ◽  
Voltage Restorer ◽  
Point Of Common Coupling ◽  
Dynamic Voltage ◽  
Bridge Type ◽  
In The Beginning

In this paper, an incorporated bridge-type superconducting fault current limiter (BSFCL) and Dynamic Voltage Restorer (DVR) is presented to improve the voltage quality and limiting fault current problems in distribution systems. In order to achieve these capabilities, the BSFCL and DVR are integrated through a common DC link as a BSFCL-DVR system. The FCL and DVR ports of the BSFCL-DVR system are located in the beginning and end of the sensitive loads’ feeder integrated to the point of common coupling (PCC) in the distribution system. At first, the principle operation of the BSFCL-DVR is discussed. Then, a control system for the BSFCL-DVR system is designed to enhance the voltage quality and limit the fault current. Eventually, the efficiency of the BSFCL-DVR system is verified through the PSCAD/EMTDC simulation.

scholarly journals Voltage disturbance mitigation in Iraq's low voltage distribution system

2020 ◽  
Vol 17 (1) ◽  
pp. 47
Author(s):  
Jamal Abdul-Kareem Mohammed ◽  
Arkan Ahmed Hussein ◽  
Sahar R. Al-Sakini
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Pulse Width Modulation ◽  
Low Voltage ◽  
Distribution Network ◽  
Voltage Source ◽  
Power Distribution Network ◽  
Dynamic Voltage Restorer ◽  
Voltage Restorer ◽  
Dynamic Voltage

<p>Power distribution network in Iraq still suffers from significant problems regarding electricity distribution level. The most important problem is the disturbances that are occurring on lines voltages, which in turn, will negatively affect sensitive loads they feed on. Protection of these loads could be achieved efficiently and economically using the dynamic voltage restorer DVR when installed between the voltage source and load to inject required compensation voltage to the network during the disturbances period. The DVR mitigates these disturbances via restoring the load voltage to a pre-fault value within a few milliseconds. To control the DVR work, dq0 transformation concept and PID method with sinusoidal pulse-width modulation SPWM based converter had been used to correct the disturbances and thus enhance the power quality of the distribution network. The DVR performance was tested by MATLAB/Simulink with all kinds of expected voltage disturbances and results investigated the effectiveness of the proposed method.</p>

Sign in / Sign up

Export Citation Format

Share Document