Triboelectric Charging Between Display Glass Panels and Dissipative/Insulative Rollers

2017 ◽  
Vol 59 (6) ◽  
pp. 1755-1764 ◽  
Author(s):  
Atieh Talebzadeh ◽  
Ali Foudazi ◽  
Ki-Hyuk Kim ◽  
Li Guan ◽  
David Pommerenke
Keyword(s):  
Glass Panels ◽  
Triboelectric Charging

Translucent Glass Roofs For Large-Span Coverings

2019 ◽  
pp. 23-28
Keyword(s):  
Warm Season ◽  
Natural Light ◽  
Labor Costs ◽  
Main Bearing ◽  
Large Span ◽  
Glass Panels ◽  
Technical Properties ◽  
Internal Volume ◽  
Basic Approaches ◽  
Smoke Removal

The article deals with the issues of glass use in the enclosing structures of large-span coverings, which have such advantages as ensuring the penetration of natural light, tightness, minimum labor costs for repair and maintenance. Design shortcomings: the high cost, the need for protection of the internal volume against the penetrating sun rays in the warm season (hothouse effect); arrangement of devices for operation of a roof. The key technical properties and characteristics of glass panels and pane-glass sets, constructive decisions, including interface to the main bearing structures of a large-span covering are given. Peculiarities of their design with due regard for ventilation and smoke removal, a drainage of condensate, ways of fight against frosting and snow drifts on the roof are reflected. Features of the account of loadings, the basic approaches to their calculation are considered. Various design solutions for the spatial metal trussed systems with the original nodal connections are presented. Information on modern solutions of translucent roofs using glass for large-span coverings is given.

scholarly journals Windblown Sand-Induced Degradation of Glass Panels in Curtain Walls

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 607
Author(s):  
Yuxi Zhao ◽  
Rongcheng Liu ◽  
Fan Yan ◽  
Dawei Zhang ◽  
Junjin Liu
Keyword(s):  
Visible Light ◽  
Mass Loss ◽  
Effective Area ◽  
Area Ratio ◽  
Light Transmittance ◽  
Relative Mass ◽  
Impact Time ◽  
Windblown Sand ◽  
Glass Panels ◽  
The Impact

The windblown sand-induced degradation of glass panels influences the serviceability and safety of these panels. In this study, the degradation of glass panels subject to windblown sand with different impact velocities and impact angles was studied based on a sandblasting test simulating a sandstorm. After the glass panels were degraded by windblown sand, the surface morphology of the damaged glass panels was observed using scanning electron microscopy, and three damage modes were found: a cutting mode, smash mode, and plastic deformation mode. The mass loss, visible light transmittance, and effective area ratio values of the glass samples were then measured to evaluate the effects of the windblown sand on the panels. The results indicate that, at high abrasive feed rates, the relative mass loss of the glass samples decreases initially and then remains steady with increases in impact time, whereas it increases first and then decreases with an increase in impact angle such as that for ductile materials. Both visible light transmittance and effective area ratio decrease with increases in the impact time and velocities. There exists a positive linear relationship between the visible light transmittance and effective area ratio.

scholarly journals Strengthening Thermal Stability in V2O5-ZnO-BaO-B2O3-M(PO3)n Glass System (M = Al, Mg) for Laser Sealing Applications

2021 ◽  
Vol 11 (10) ◽  
pp. 4603
Author(s):  
Soyoung Kim ◽  
Karam Han ◽  
Seonhoon Kim ◽  
Linganna Kadathala ◽  
Jinhyeok Kim ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Thermal Expansion ◽  
Bond Strength ◽  
Coefficient Of Thermal Expansion ◽  
Glass Frit ◽  
Glass System ◽  
Fiber Types ◽  
Hermetic Sealing ◽  
Doped Glasses ◽  
Glass Panels

Today, the most common way of laser sealing is using a glass frit paste and screen printer. Laser sealing using glass frit paste has some problems, such as pores, nonuniform height, imperfect hermetic sealing, etc. In order to overcome these problems, sealing using fiber types of sealant is attractive for packaging devices. In this work, (70-x)V2O5-5ZnO-22BaO-3B2O3-xM(PO3)n glasses (mol%) incorporated with xM(PO3)n concentration (where M = Mg, Al, n = 2, 3, respectively) were fabricated and their thermal, thermomechanical, and structural properties were investigated. Most importantly, for this type of sealing, the glass should have a thermal stability (ΔT) of ≥80 °C and the coefficient of thermal expansion (CTE) between the glass and panel should be 1.0 ppm/°C. The highest thermal stability ΔT of the order of 93.2 °C and 112.9 °C was obtained for the 15 mol% of Mg(PO3)2 and Al(PO3)3 doped glasses, respectively. This reveals that the bond strength and connectivity is more strongly improved by trivalent Al(PO3)3. The CTE of a (70-x)V2O5-5ZnO-22BaO-3B2O3-xAl(PO3)3 glass system (mol%) (where x = 5–15, mol%) is in the range of 9.5–15.5 (×10−6/K), which is comparable with the CTE (9–10 (×10−6/K)) of commercial DSSC glass panels. Based on the results, the studied glass systems are considered to be suitable for laser sealing using fiber types of sealant.

Factors influencing the triboelectric charging of granular plastics in a new multi-cylinder type device

2020 ◽  
Author(s):  
Imed Eddine Achouri ◽  
Gontran Richard ◽  
Thami Zeghloul ◽  
Karim Medles ◽  
Mohamed Fodil Boukhoulda ◽  
...  
Keyword(s):  
Factors Influencing ◽  
Type Device ◽  
Triboelectric Charging
Sign in / Sign up

Export Citation Format

Share Document