Pitfalls in the architectural design process and a defensible method for overcoming them

1983 ◽  
Vol EM-30 (3) ◽  
pp. 128-139
Author(s):  
Bernard H. Rudwick
Keyword(s):  
Design Process ◽  
Architectural Design

scholarly journals Energy Rating of Buildings to Promote Energy-Conscious Design in Israel

Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 59
Author(s):  
Abraham Yezioro ◽  
Isaac Guedi Capeluto
Keyword(s):  
Design Process ◽  
Architectural Design ◽  
Residential Building ◽  
Green Building ◽  
Energy Performance ◽  
Basic Unit ◽  
Design Stage ◽  
Design Decision ◽  
Rating Systems ◽  
New Buildings

Improving the energy efficiency of existing and new buildings is an important step towards achieving more sustainable environments. There are various methods for grading buildings that are required according to regulations in different places for green building certification. However, in new buildings, these rating systems are usually implemented at late design stages due to their complexity and lack of integration in the architectural design process, thus limiting the available options for improving their performance. In this paper, the model ENERGYui used for design and rating buildings in Israel is presented. One of its main advantages is that it can be used at any design stage, including the early ones. It requires information that is available at each stage only, as the additional necessary information is supplemented by the model. In this way, architects can design buildings in a way where they are aware of each design decision and its impact on their energy performance, while testing different design directions. ENERGYui rates the energy performance of each basic unit, as well as the entire building. The use of the model is demonstrated in two different scenarios: an office building in which basic architectural features such as form and orientation are tested from the very beginning, and a residential building in which the intervention focuses on its envelope, highlighting the possibilities of improving their design during the whole design process.

Achieving sustainability through integrating risk management into the architectural design process

2018 ◽  
Vol 16 (1) ◽  
pp. 25-43 ◽  
Author(s):  
Ayman Ahmed Ezzat Othman ◽  
Nermeen Mohamed Amin Abdelwahab
Keyword(s):  
Risk Management ◽  
Literature Review ◽  
Field Study ◽  
Design Process ◽  
Construction Projects ◽  
Architectural Design ◽  
Sustainable Construction ◽  
Content Type ◽  
Scant Attention ◽  
Design Firms

Purpose The purpose of this paper is to develop a framework integrating risk management (RM) into the architectural design process (ADP) as an approach for delivering sustainable construction projects. Design/methodology/approach A research methodology, which consisted of literature review and field study, is designed to accomplish four objectives. First, to provide a comprehensive literature review of the concepts of sustainability, ADP and RM. Second, to present and synthesis the results of two relevant studies focused on identifying, quantifying and classifying the risks associated with ADP; and investigating the perception and application of Egyptian architectural design firms (ADFs) towards integrating RM into ADP as an approach for delivering sustainable construction projects. Third, to develop a framework that integrates RM into ADP towards delivering sustainable construction projects. Finally, to draw conclusions and recommendations to improve the practice of delivering sustainable construction projects among ADFs, construction professionals and governmental authorities. Findings ADP is a fundamental phase of the construction process because the decisions adopted during this phase affect the project performance throughout its life cycle. While RM is widely applied in different sectors of the construction industry, its application in ADP received scant attention in construction literature. The research identified 18 key risks that affect the sustainable delivery of construction projects during ADP. The architect, the client and the project manager are the highest ranked responsible parties for the occurrence of these key risks. The field study highlighted the need to develop a framework to facilitate integrating RM into ADP. Research limitations/implications This paper focused only on the integration of RM into ADP. Originality/value The conducted literature review and field study provided an in-depth understanding of the key risks that affect the sustainable delivery of construction projects during ADP. Through its five stages, the proposed framework is expected to serve as a foundation for integrating RM into ADP as an approach for delivering sustainable projects. This ideology has received scant attention in construction literature. The developed framework represents a synthesis that is novel and creative in thought and adds value to the knowledge in a manner that has not previously occurred.

Buildings with environmental quality management, part 2: Integration of hydronic heating/cooling with thermal mass

2017 ◽  
Vol 41 (5) ◽  
pp. 397-417 ◽  
Author(s):  
A Romanska-Zapala ◽  
M Bomberg ◽  
M Fedorczak-Cisak ◽  
M Furtak ◽  
D Yarbrough ◽  
...  
Keyword(s):  
Control Systems ◽  
Design Process ◽  
Architectural Design ◽  
Integrated Design ◽  
Field Performance ◽  
Functional Materials ◽  
Heating System ◽  
Transient Temperature ◽  
Thermal Mass ◽  
Integrated Design Process

The quest for a sustainable built environment brought dramatic changes to architectural design because of the integrated design process. The integrated design process is the modern way to realize “performance architecture,” that is, design with a view to field performance. Integrated design process permits merging of concepts from passive-house designs, solar engineering, and an integration of the building enclosure with mechanical services. In part 1 of this series, the emergence of many new multi-functional materials was discussed. Yet, current innovation is guided by lessons from history. Thermal mass in heavy masonry buildings allowed periodic heating. The authors postulate integration of a hydronic heating system with the walls and the use of smart temperature control of the heating system to modify and optimize the thermal mass contribution. To use the mass of a building, one must accept transient temperature conditions where the indoor temperature varies but is confined by comfort requirements for both summer and winter conditions. On the other side, resiliency requirements dictate that in the absence of electricity the air temperature does not fall below about 12°C over a period of several hours. This requirement implies that summer cooling will likely be separated from the heating systems and that operation of a low-energy building is heavily dependent on the design of smart control systems. Analysis of control systems provided in this article for earth-to-air heat exchangers and cooling of houses with lightweight walls lead us to the requirements of separation between heating and ventilation and needs for different sources of fresh air. Finally, a new concept emerges.

Adopting SCAMPER`S Strategies to Incorporate the Sustainability Concepts Within Architectural Design Process

2021 ◽  
Author(s):  
Farhan Ali ◽  
Keyword(s):  
Design Process ◽  
Creative Thinking ◽  
Architectural Design ◽  
Divergent Thinking ◽  
Functional Performance ◽  
Necessary Condition ◽  
Existing Building ◽  
Starting Point ◽  
Wide Range ◽  
The Aesthetic

Thinking creatively, is a necessary condition of the Design process to transform ideas into novel solutions and break barriers to creativity. Although, there are many techniques and ways to stimulate creative thinking for designers, however, this research paper adopts SCAMPER; which is acronym of: Substitute- Combine-Adapt- Modify or Magnify-Put to another use-Eliminate-Reverse or Rearrange- to integrate the sustainability concepts within architectural design process. Many creative artifacts have been designed consciously or unconsciously adopting SCAMPER strategies such as rehabilitation and reuse projects to improve the functional performance or the aesthetic sense of an existing building for the better. SCAMPER is recognized as a divergent thinking tool are used during the initial ideation stage, aims to leave the usual way of thinking to generate a wide range of new ideas that will lead to new insights, original ideas, and creative solutions to problems. The research focuses on applying this method in the architectural design, which is rarely researched, through reviewing seven examples that have been designed consciously or unconsciously adopting SCAMPER mnemonic techniques. The paper aims to establish a starting point for further research to deepen it and study its potentials in solving architectural design problems.

scholarly journals Digital Studio vs. Conventional in Teaching Architectural Design Process

2012 ◽  
Vol 64 ◽  
pp. 18-25 ◽  
Author(s):  
Mohd Arif Ismail ◽  
Rosnaini Mahmud ◽  
Isham Shah Hassan
Keyword(s):  
Design Process ◽  
Architectural Design

scholarly journals Ismar David’s Quest for Original Hebrew Typographic Signs

2021 ◽  
Vol 53 (1) ◽  
Author(s):  
Shani Avni
Keyword(s):  
New York ◽  
Design Process ◽  
Architectural Design ◽  
Design Solution ◽  
Type Design ◽  
Graphic Designer ◽  
Character Set ◽  
Creative Career ◽  
Applied Arts

Ismar David was a prolific calligrapher, type designer, graphic designer, and illustrator who also engaged in architectural design and taught calligraphy. He studied applied arts in Berlin, emigrating to Jerusalem in 1932 and to New York in 1952. From the 1930s to the 1990s, he created a wealth of unique designs, most importantly the David Hebrew typeface family. It was the first comprehensive Hebrew typeface family, comprising nine styles that include a true Hebrew italic style and a monolinear style, equivalent to a Latin sans serif. David Hebrew provides an example of how a research-based design process can help negotiate the tension between old and new, leading to an innovative, well-informed design solution. David not only excelled in his groundbreaking approach to Hebrew type design for existing glyphs, but he went a step further, expanding the character set. After David completed the design of his typeface family in 1954, it was partially cast for machine composition by the Intertype Corporation. During that period, David relocated to New York to pursue his creative career.

scholarly journals Finite volume method room acoustic simulations integrated into the architectural design process

2017 ◽  
Vol 141 (5) ◽  
pp. 3783-3783
Author(s):  
Finnur Pind ◽  
Cheol Ho Jeong ◽  
Allan P. Engsig-Karup ◽  
Jakob Strømann-Andersen
Keyword(s):  
Finite Volume Method ◽  
Finite Volume ◽  
Design Process ◽  
Architectural Design ◽  
Volume Method
Sign in / Sign up

Export Citation Format

Share Document