Method of Providing the High Cyclotron Harmonic Operation Selectivity in a Gyrotron With a Spatially Developed Operating Mode

2017 ◽  
Vol 64 (9) ◽  
pp. 3893-3897 ◽  
Author(s):  
Ilya V. Bandurkin ◽  
Mikhail Yu Glyavin ◽  
Sergey V. Kuzikov ◽  
Petr B. Makhalov ◽  
Ivan V. Osharin ◽  
...  
Keyword(s):  
Operating Mode ◽  
Harmonic Operation ◽  
Cyclotron Harmonic

Improvement of Stability of High Cyclotron Harmonic Operation in the Double-Beam THz Gyrotrons

2016 ◽  
pp. 1-7 ◽  
Author(s):  
Naum S. Ginzburg ◽  
Mikhail Yu Glyavin ◽  
Andrey M. Malkin ◽  
Vladimir N. Manuilov ◽  
Roman M. Rozental ◽  
...  
Keyword(s):  
Harmonic Operation ◽  
Double Beam ◽  
Cyclotron Harmonic

Enhancement of Contrast in the CEM and STEM Using Bumpy Specimens and Employing the “Dappled Field” Mode of Operation

1974 ◽  
Vol 32 ◽  
pp. 552-553 ◽  
Author(s):  
L. Gandolfi ◽  
J. Reiffel
Keyword(s):  
Operating Mode ◽  
Scanning Transmission Electron Microscope ◽  
Dark Field ◽  
Specimen Preparation ◽  
Field Mode ◽  
Preparation Methods ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Mode Of Operation ◽  
Scanning Transmission

Calculations have been performed on the contrast obtainable, using the Scanning Transmission Electron Microscope, in the observation of thick specimens. Recent research indicates a revival of an earlier interest in the observation of thin specimens with the view of comparing the attainable contrast using both types of specimens.Potential for biological applications of scanning transmission electron microscopy has led to a proliferation of the literature concerning specimen preparation methods and the controversy over “to stain or not to stain” in combination with the use of the dark field operating mode and the same choice of technique using bright field mode of operation has not yet been resolved.

Supercontinuum laser-based monochromatic radiant source for detector spectral responsivity characterization in the range 0.9–1.6 μm using absolute cryogenic radiometer

2020 ◽  
pp. 28-33
Author(s):  
A. Yu. Dunaev ◽  
A. S. Baturin ◽  
V. N. Krutikov ◽  
S. P. Morozova
Keyword(s):  
Power Distribution ◽  
Spectral Power ◽  
Feedback System ◽  
Operating Mode ◽  
Spectral Responsivity ◽  
Spectral Power Distribution ◽  
Cryogenic Radiometer ◽  
Supercontinuum Laser ◽  
Radiant Power ◽  
Double Monochromator

An improved monochromatic radiant source with spectral bandwidth of 4 nm based on supercontinuum laser and a double monochromator was included in absolute cryogenic radiometer-based facility to improve the accuracy of spectral responsivity measurement in the range 0.9–1.6 μm. The developed feedback system ensures stabilization of monochromatic radiant power with standard deviation up to 0.025 %. Radiant power that proceeds detector under test or absolute cryogenic radiometer varies from 0.1 to 1.5 mW in dependence of wavelength. The spectral power distribution of its monochromatic source for various operating mode is presented.

Research and Modelling on Electrical and Thermal Mode of LEDs Operation in the Luminaire

2018 ◽  
pp. 155-162 ◽  
Author(s):  
Sergei S. Kapitonov ◽  
Anastasia V. Kapitonova ◽  
Sergei Yu. Grigorovich ◽  
Sergei A. Medvedev ◽  
Taher Sobhy
Keyword(s):  
Thermal Conditions ◽  
Operating Mode ◽  
Thermal Processes ◽  
Thermal Mode ◽  
Crystal Temperature ◽  
Premature Failure ◽  
Model Based

In the article, the electrical and thermal processes in the LED lamp with varied parameters are investigated. Voltage and current measurements on all LEDs of the luminaire are carried out in the nominal operating mode. The power allocated to each LED is determined. The calculation of the LED crystal temperature was carried out using the developed thermal LED model based on the results of the measurements and by using “Multisim” program. It has been established that the temperature of the crystals of individual LEDs in the luminaire differ significantly, which leads to unfavourable thermal conditions for them and an increased likelihood of premature failure.

OPTIMIZATION OF SWEEP-TYPE SAMPLER OPERATING MODE BY COMPUTER SIMULATION

2018 ◽  
Vol 9 ◽  
pp. 193-201
Author(s):  
I.U. Prokopenko ◽  
◽  
S.A. Denisov ◽  
A.S. Morkovin ◽  
D.K. Nesterov ◽  
...  
Keyword(s):  
Computer Simulation ◽  
Operating Mode

Determination of δ-hexadecansultone in sodium α-olefinesulphonates and liquid detergents using gas chromatography-mass spectrometry (GC/MS)

2019 ◽  
Vol 85 (7) ◽  
pp. 16-21
Author(s):  
Liliya R. Mubarakova ◽  
German K. Budnikov
Keyword(s):  
Multicomponent Mixture ◽  
Operating Mode ◽  
Complete Separation ◽  
Gas Chromatography Mass Spectrometry ◽  
Liquid Detergent ◽  
Cyclic Esters ◽  
Alcohol Water ◽  
Household Chemicals ◽  
Hydrolysis Of

Sultones are cyclic esters of hydroxysulfonic acids, which are formed in the process of sulfonation of α-olefins with sulfur trioxide gas. More stable sultones may be present in the final product — an anionic surfactant — sodium α-olefin sulfonate (AOC-Na). AOC-Na is widely used in the production of household chemicals and cosmetic products, including liquid dishwashing detergents. Sultones are strong skin sensitizers, their level in AOC-Na should be strictly controlled and not exceed 5 ppm. Operational and strict control of the sultone content upon AOC-Na production allows timely adjustment at the stage of hydrolysis, which leads to a more complete disclosure of the sultone cycle with the formation of the corresponding olefin sulfonates and hydroxyalkanesulfonates. We propose a method for determining δ-hexadecansultone in liquid dishwashing detergents and sodium α-olefinsulfonates obtained on the basis of α-olefins of C14 – C16 fractions using GC/MS, which provides shortening of sample preparation and keeps the sensitivity with a detection limit of 0.02 mg/kg. The effect of various weakly polar and non-polar organic solvents used for Sultone extraction from AOC-Na and liquid detergent on liquid extraction based on the dispersion of the extractant in an alcohol/water phase is studied. When selecting the solvent we have shown that the use of diethyl ether provided the best extraction of the analyte. Determination of the analyte extraction recovery was performed using the reaction of hydrolysis of the extracted mixture. We specified the operating mode of the device which provided complete separation of the components of the analyzed compounds including the samples of liquid detergent for dishes being a multicomponent mixture of complex composition.

Justification for Unscheduled Maintenance of Solar Panels Used as a Power Supply for Sprinkler Machines

2020 ◽  
Vol 67 (1) ◽  
pp. 16-21
Author(s):  
Sergey M. Bakirov ◽  
Sergey S. Eliseev
Keyword(s):  
Power Supply ◽  
Power Loss ◽  
Renewable Energy Sources ◽  
Operating Mode ◽  
Dust Storms ◽  
Research Purpose ◽  
Solar Panels ◽  
Solar Module ◽  
Empirical Observation ◽  
Modern Level

The modern level of agriculture is described by the introduction of renewable energy sources. New generation sprinkler machines are being put into production, in the power system of which solar panels are used. One of the factors that negatively affect the performance of solar cells in an open field is their dusting, which is formed as a result of dust storms and wind. Cleaning of the battery panels is carried out in various ways: manual, semi-automatic and automatic. Dust cleaning is included in maintenance. (Research purpose) The research purpose is to determine the conditions for performing the maintenance, which consists in cleaning solar panels in the field. (Materials and methods) Theoretical (analysis, hypothesis design), empirical (observation, testing), experimental (ascertaining experiment) methods has been used during research. (Results and discussion) The article describes an introduced parameter for estimating the level of dusting. The power loss indicator shows the ratio of the power of the dusted module to the power of the clean module. Unscheduled maintenance is affected by the distance of the solar module from the repair point, the power of the solar module, the loss from dusting, the frequency of maintenance and cost indicators. (Conclusions) It has been found the dependence of maintenance period of the solar module of the sprinkler machine on the distance to the sprinkler machine, to the point of maintenance and repair, the power loss coefficient in case of dusting of the solar module, the cost of performing maintenance, as well as the frequency of maintenance. Article describes the boundaries of the choice of operating mode of the sprinkler between unscheduled maintenance for cleaning the solar module and the acceptance of additional power of the sprinkler power supply system according to the criterion of minimum operating costs.

scholarly journals Monitoring the technological processes in the wood industry in order to make them more efficient through technical overhauling

2019 ◽  
Vol 290 ◽  
pp. 02007
Author(s):  
Radu Dan Paltan ◽  
Cristina Biriş ◽  
Loredana Anne-Marie Rădulescu
Keyword(s):  
Automotive Industry ◽  
Operating Mode ◽  
Solid Wood ◽  
Production Costs ◽  
Operating Costs ◽  
Future Research ◽  
Wood Industry ◽  
Research Article ◽  
State Of Research ◽  
The Cost

Of many techniques that are used to optimize production and costs, the studies conducted within a profile company lead to our choice for testing the 6Sigma method (the most used method in the automotive industry) in view of the economic efficiency applied in the wood Industry company. This method measures how many flaws exist in a process and determines in a systematic way how to improve it by technical overhauling and eliminating or minimizing the process for efficiency. This research article aims to study the state of research on the optimization of the production process through technical overhauling for panels reconstituted from solid wood and ways to make production more efficient by cutting costs through technical overhauling. From preliminary research, we estimate that all the items founded and others that will result from further research will result in a significant decrease in production costs that are reflected in the cost of the finished product and consequently in increasing the yield of the company by maximizing its profit. At the same time it may be the basis of future research studies in the field. The easier it is to maximize profits, the lower the operating costs are and the higher recovery rate of investments are, that will result a change in the operating mode: “working smarter not harder”.

Automodulation instability in gyrotrons operating at the second cyclotron harmonic

2021 ◽  
Vol 28 (4) ◽  
pp. 043303
Author(s):  
A. P. Fokin ◽  
V. L. Bakunin ◽  
M. Yu. Glyavin ◽  
G. S. Nusinovich
Keyword(s):  
Cyclotron Harmonic
Sign in / Sign up

Export Citation Format

Share Document