scholarly journals Oscillatory Stability and Eigenvalue Sensitivity Analysis of A DFIG Wind Turbine System

2011 ◽  
Vol 26 (1) ◽  
pp. 328-339 ◽  
Author(s):  
Lihui Yang ◽  
Zhao Xu ◽  
Jacob Østergaard ◽  
Zhao Yang Dong ◽  
Kit Po Wong ◽  
...  
Keyword(s):  
Sensitivity Analysis ◽  
Wind Turbine ◽  
Eigenvalue Sensitivity ◽  
Wind Turbine System

scholarly journals Improving the Strategy of Maintaining Offshore Wind Turbines through Petri Net Modelling

2021 ◽  
Vol 11 (2) ◽  
pp. 574
Author(s):  
Rundong Yan ◽  
Sarah Dunnett
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Petri Net ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Maintenance Costs ◽  
Offshore Wind Turbines ◽  
Major Repair ◽  
Wind Turbine System ◽  
Periodic Maintenance

In order to improve the operation and maintenance (O&M) of offshore wind turbines, a new Petri net (PN)-based offshore wind turbine maintenance model is developed in this paper to simulate the O&M activities in an offshore wind farm. With the aid of the PN model developed, three new potential wind turbine maintenance strategies are studied. They are (1) carrying out periodic maintenance of the wind turbine components at different frequencies according to their specific reliability features; (2) conducting a full inspection of the entire wind turbine system following a major repair; and (3) equipping the wind turbine with a condition monitoring system (CMS) that has powerful fault detection capability. From the research results, it is found that periodic maintenance is essential, but in order to ensure that the turbine is operated economically, this maintenance needs to be carried out at an optimal frequency. Conducting a full inspection of the entire wind turbine system following a major repair enables efficient utilisation of the maintenance resources. If periodic maintenance is performed infrequently, this measure leads to less unexpected shutdowns, lower downtime, and lower maintenance costs. It has been shown that to install the wind turbine with a CMS is helpful to relieve the burden of periodic maintenance. Moreover, the higher the quality of the CMS, the more the downtime and maintenance costs can be reduced. However, the cost of the CMS needs to be considered, as a high cost may make the operation of the offshore wind turbine uneconomical.

scholarly journals Experimental and simulation-based analysis of asymmetrical spherical roller bearings as main bearings for wind turbines

2021 ◽  
Author(s):  
Amin Loriemi ◽  
Georg Jacobs ◽  
Sebastian Reisch ◽  
Dennis Bosse ◽  
Tim Schröder
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Measurement Data ◽  
Contact Angles ◽  
Suspension System ◽  
Roller Bearings ◽  
Axial Forces ◽  
Wind Turbine System ◽  
Bearing Life ◽  
The Individual

AbstractSymmetrical spherical roller bearings (SSRB) used as main bearings for wind turbines are known for their high load carrying capacity. Nevertheless, even designed after state-of-the-art guidelines premature failures of this bearing type occur. One promising solution to overcome this problem are asymmetrical spherical roller bearings (ASRB). Using ASRB the contact angles of the two bearing rows can be adjusted individually to the load situation occurring during operation. In this study the differences between symmetrical and asymmetrical spherical roller bearings are analyzed using the finite element method (FEM). Therefore, FEM models for a three point suspension system of a wind turbine including both bearings types are developed. These FEM models are validated with measurement data gained at a full-size wind turbine system test bench. Taking into account the design loads of the investigated wind turbine it is shown that the use of an ASRB leads to a more uniform load distribution on the individual bearing rows. Considering fatigue-induced damage an increase of the bearing life by 62% can be achieved. Regarding interactions with other components of the rotor suspension system it can be stated that the transfer of axial forces into the gearbox is decreased significantly.

scholarly journals Design and Analysis of a MPC-based Mechanical Hardware-in-the-Loop System for Full-Scale Wind Turbine System Test Benches

2017 ◽  
Vol 50 (1) ◽  
pp. 10985-10991 ◽  
Author(s):  
Christian Leisten ◽  
Uwe Jassmann ◽  
Johannes Balshüsemann ◽  
Mathias Hakenberg ◽  
Dirk Abel
Keyword(s):  
Wind Turbine ◽  
Full Scale ◽  
Loop System ◽  
Hardware In The Loop ◽  
Wind Turbine System
Sign in / Sign up

Export Citation Format

Share Document