Study and modeling of noise on the low voltage part of the electrical power distribution network between 30 kHz and 1 MHz

2002 ◽  
Author(s):  
F.J. Simois ◽  
J.I. Acha
Keyword(s):  
Power Distribution ◽  
Low Voltage ◽  
Electrical Power ◽  
Distribution Network ◽  
Power Distribution Network

Application of Dynamic Voltage Restorer for Power Quality Improvement in Low Voltage Electrical Power Distribution Network: An Overview

2017 ◽  
Vol 28 ◽  
pp. 142-156 ◽  
Author(s):  
Patrick Taiwo Ogunboyo ◽  
Remy Tiako ◽  
Innocent E. Davidson
Keyword(s):  
Power Quality ◽  
Power Distribution ◽  
Low Voltage ◽  
Electrical Power ◽  
Distribution Network ◽  
Power Distribution Network ◽  
Dynamic Voltage Restorer ◽  
Voltage Restorer ◽  
Power Quality Improvement ◽  
Dynamic Voltage

Dynamic Voltage Restorer (DVR) is a series connected power electronics based custom power device that is used to improve voltage disturbances in low voltage electrical power distribution network. Power quality requirement is one of the most important concerns for power system. The parts of the DVR is made up of voltage source inverter, injection/booster transformer, a harmonic filter, an energy storage device and a bypass switch. The DVR is used to inject three phase voltage in series and in synchronism with the network voltages in order to compensate voltage disturbances with a benefit of active /reactive power control. This paper presents a review of the researches on the dynamic voltage restorer application for power quality improvement in low voltage electrical power distribution networks. It describes power quality issues, principle of operation of DVR, basic components of DVR, DVRs control topologies in distribution network, DVR control strategies and compensation techniques.

scholarly journals Voltage disturbance mitigation in Iraq's low voltage distribution system

2020 ◽  
Vol 17 (1) ◽  
pp. 47
Author(s):  
Jamal Abdul-Kareem Mohammed ◽  
Arkan Ahmed Hussein ◽  
Sahar R. Al-Sakini
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Pulse Width Modulation ◽  
Low Voltage ◽  
Distribution Network ◽  
Voltage Source ◽  
Power Distribution Network ◽  
Dynamic Voltage Restorer ◽  
Voltage Restorer ◽  
Dynamic Voltage

<p>Power distribution network in Iraq still suffers from significant problems regarding electricity distribution level. The most important problem is the disturbances that are occurring on lines voltages, which in turn, will negatively affect sensitive loads they feed on. Protection of these loads could be achieved efficiently and economically using the dynamic voltage restorer DVR when installed between the voltage source and load to inject required compensation voltage to the network during the disturbances period. The DVR mitigates these disturbances via restoring the load voltage to a pre-fault value within a few milliseconds. To control the DVR work, dq0 transformation concept and PID method with sinusoidal pulse-width modulation SPWM based converter had been used to correct the disturbances and thus enhance the power quality of the distribution network. The DVR performance was tested by MATLAB/Simulink with all kinds of expected voltage disturbances and results investigated the effectiveness of the proposed method.</p>

scholarly journals Automatic Fault Localization and Isolation in Power Distribution Network by Decision Support Method

2021 ◽  
Vol 18 (4) ◽  
Author(s):  
Satya PRAKASH ◽  
Manoj HANS ◽  
Vikas THORAT
Keyword(s):  
Electricity Market ◽  
Power Distribution ◽  
Low Voltage ◽  
Distribution Network ◽  
Distribution Networks ◽  
Distribution Automation ◽  
Power Distribution Network ◽  
Medium Voltage ◽  
Time Observation ◽  
And Control

The power distribution network has grown complex and vulnerable as it increases its demand. The system's reliability has become a prominent factor for the end-users, although the continuity of supply in the distribution network still remains a challenge. In order to achieve the same distribution, automation came into the picture. The term “Distribution Automation” usually refers to an advanced switching system, which works as a subsystem of the existing network. The purpose of the subsystem is to offer real-time observation and control in distribution networks and electricity market operations. Consequently, the development of an autonomous system for isolating failures and restoring power for the distribution of LV (low voltage)/MV (medium voltage) can be an attractive solution for improving energy facilities' reliability. Advanced management techniques are devices and algorithms used to analyze, diagnose, and predict conditions in a distribution network, as well as to identify and take appropriate corrective actions to eliminate, mitigate, and prevent power outages and power quality problems. To demonstrate the model, we used a PIC16F877, CT microcontroller, and a power supply unit.

Sign in / Sign up

Export Citation Format

Share Document