3-D Printed High-Gain Wideband Waveguide Fed Horn Antenna Arrays for Millimeter-Wave Applications

2019 ◽  
Vol 67 (5) ◽  
pp. 2868-2877 ◽  
Author(s):  
Yujian Li ◽  
Lei Ge ◽  
Junhong Wang ◽  
Shan Da ◽  
Di Cao ◽  
...  
2005 ◽  
Author(s):  
Rownak Shireen ◽  
Timothy Hwang ◽  
Shouyuan Shi ◽  
D. W. Prather

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4753
Author(s):  
Md Nazim Uddin ◽  
Sangjo Choi

A corporate feeding antenna array with parasitic patches has been investigated previously for millimeter-wave applications due to its high gain and wide bandwidth. However, the parasitic patch integration in the uniformly powered and spaced patch antenna array led to a high sidelobe level (SLL). In this study, we designed a non-uniformly powered and spaced corporate feeding network to feed a 12-element parasitic patch-integrated microstrip antenna array for SLL reduction at 28 GHz in the millimeter-wave band. In the power divider, we arranged two one-to-six unequally feeding power dividers from the opposite side to feed 12 antenna elements with non-uniform excitation, and effectively controlled the spacing between antenna elements. The two opposite input ports from the power divider were fed 180° out-of-phase for good isolation between the adjacent antenna elements. To verify the SLL reduction effect from the non-uniform spacing in the array, we designed two non-uniformly powered patch antenna arrays with uniform and non-uniform spacing. In the measurement, the non-uniformly powered and spaced patch antenna array demonstrated a nearly 16.56 dBi boresight gain and −17.27 dB SLL, which is nearly 2 dB lower than the uniformly spaced counterpart. Finally, we expect that the non-uniformly powered and spaced high gain patch antenna array with a low SLL will be suitable for millimeter-wave communication applications.


2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Cheng-Nan Hu ◽  
Dau-Chyrh Chang ◽  
Chung-Hang Yu ◽  
Tsai-Wen Hsaio ◽  
Der-Phone Lin

This paper presents a high gain millimeter-wave (mmW) low-temperature cofired ceramic (LTCC) microstrip antenna array with a compact, simple, and low-profile structure. Incorporating minimum mean square error (MMSE) adaptive algorithms with the proposed 64-element microstrip antenna array, the numerical investigation reveals substantial improvements in interference reduction. A prototype is presented with a simple design for mass production. As an experiment, HFSS was used to simulate an antenna with a width of 1 mm and a length of 1.23 mm, resonating at 38 GHz. Two identical mmW LTCC microstrip antenna arrays were built for measurement, and the center element was excited. The results demonstrated a return loss better than 15 dB and a peak gain higher than 6.5 dBi at frequencies of interest, which verified the feasibility of the design concept.


2011 ◽  
Vol E94-C (10) ◽  
pp. 1548-1556 ◽  
Author(s):  
Takana KAHO ◽  
Yo YAMAGUCHI ◽  
Kazuhiro UEHARA ◽  
Kiyomichi ARAKI

Sign in / Sign up

Export Citation Format

Share Document