Virtual HF injection method (VHFIM) of rotor position estimation of PMSM under field oriented control

2006 ◽  
Author(s):  
B. Dobrucky ◽  
J. Michalik ◽  
P. Spanik ◽  
V. Bobek
Keyword(s):  
Position Estimation ◽  
Field Oriented Control ◽  
Injection Method ◽  
Rotor Position ◽  
Rotor Position Estimation

scholarly journals Performance Analysis of a Full Order Sensorless Control Adaptive Observer for Doubly-Fed Induction Generator in Grid Connected Operation

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1254
Author(s):  
Gianluca Brando ◽  
Adolfo Dannier ◽  
Ivan Spina
Keyword(s):  
Sensorless Control ◽  
Estimation Error ◽  
Position Estimation ◽  
Adaptive Observer ◽  
Induction Generator ◽  
Doubly Fed Induction Generator ◽  
Rotor Position ◽  
Stator Flux ◽  
Doubly Fed ◽  
Rotor Position Estimation

This paper focuses on the performance analysis of a sensorless control for a Doubly Fed Induction Generator (DFIG) in grid-connected operation for turbine-based wind generation systems. With reference to a conventional stator flux based Field Oriented Control (FOC), a full-order adaptive observer is implemented and a criterion to calculate the observer gain matrix is provided. The observer provides the estimated stator flux and an estimation of the rotor position is also obtained through the measurements of stator and rotor phase currents. Due to parameter inaccuracy, the rotor position estimation is affected by an error. As a novelty of the discussed approach, the rotor position estimation error is considered as an additional machine parameter, and an error tracking procedure is envisioned in order to track the DFIG rotor position with better accuracy. In particular, an adaptive law based on the Lyapunov theory is implemented for the tracking of the rotor position estimation error, and a current injection strategy is developed in order to ensure the necessary tracking sensitivity around zero rotor voltages. The roughly evaluated rotor position can be corrected by means of the tracked rotor position estimation error, so that the corrected rotor position is sent to the FOC for the necessary rotating coordinate transformation. An extensive experimental analysis is carried out on an 11 kW, 4 poles, 400 V/50 Hz induction machine testifying the quality of the sensorless control.

Initial rotor position estimation for sensorless brushless DC drives

2007 ◽  
Author(s):  
P. Champa ◽  
P. Somsiri ◽  
P. Wipasuramonton ◽  
P. Nakmahachalasint
Keyword(s):  
Position Estimation ◽  
Rotor Position ◽  
Brushless Dc ◽  
Rotor Position Estimation
Sign in / Sign up

Export Citation Format

Share Document