Investigation of the deficiencies of parallel manipulators in singular configurations through the Jacobian nullspace

2002 ◽  
Author(s):  
V.K. Chan ◽  
I. Ebert-Uphoff
Keyword(s):  
Parallel Manipulators ◽  
Singular Configurations

scholarly journals On the Dynamic Properties of Flexible Parallel Manipulators in the Presence of Type 2 Singularities

2011 ◽  
Vol 3 (3) ◽  
Author(s):  
Sébastien Briot ◽  
Vigen Arakelian
Keyword(s):  
Optimal Control ◽  
Parallel Manipulator ◽  
Dynamic Properties ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Inverse Dynamic ◽  
Suggested Approach ◽  
Singular Configurations ◽  
Optimal Force

In the present paper, we expand information about the conditions for passing through Type 2 singular configurations of a parallel manipulator. It is shown that any parallel manipulator can cross the singular configurations via an optimal control permitting the favorable force distribution, i.e., the wrench applied on the end-effector by the legs and external efforts must be reciprocal to the twist along with the direction of the uncontrollable motion. The previous studies have proposed the optimal control conditions for the manipulators with rigid links and flexible actuated joints. The different polynomial laws have been obtained and validated for each examined case. The present study considers the conditions for passing through Type 2 singular configurations for the parallel manipulators with flexible links. By computing the inverse dynamic model of a general flexible parallel robot, the necessary conditions for passing through Type 2 singular configurations are deduced. The suggested approach is illustrated by a 5R parallel manipulator with flexible elements and joints. It is shown that a 16th order polynomial law is necessary for the optimal force generation. The obtained results are validated by numerical simulations carried out using the software ADAMS.

Improving Motion Stability of the Plane 3-RPR Parallel Manipulator at Singular Configuration

2018 ◽  
Author(s):  
Yu-Tong Li ◽  
Yu-Xin Wang
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Angular Speed ◽  
Motion Stability ◽  
Singular Configurations ◽  
Movable Platform ◽  
Singular Configuration ◽  
Translation Type ◽  
External Forces ◽  
Gerschgorin Circle

Kinematic parameters have significant influences on the motion stability of parallel manipulators at singular configureations. Taking the plane 3-RPR parallel manipulator as an example, the motion stability at different types of singular configurations corresponding to the angular speed and velocity of the movable platform are investigated. At first, the second order of uncoupled dynamics equation for the 3-RPR parallel manipulator is established with the aid of the second class Lagrange approach. According to the Lyapunov first approximate stability criterion, the approximate conditions for the 3-RPR parallel manipulator with a stabile motion at singular configurations are determined based on the Gerschgorin circle theorem. Next, the exact Hurwitz criterion is utilized to study the motion stability and the load capability of the manipulator corresponding to the angular speed and velocity of the movable platform, as well as the directions of the external forces at two kinds of singular configurations: with a gained rotation-type DOF, and with a gained translation-type DOF, respectively. The results show that increasing both the angular speed and the velocity of the mass center of the movable platform can efficiently improve the motion stability of the 3-RPR parallel manipulator at singular configurations.

A geometric approach for singularity analysis of 3-DOF planar parallel manipulators using Grassmann–Cayley algebra

Robotica ◽  
2015 ◽  
Vol 35 (3) ◽  
pp. 511-520 ◽  
Author(s):  
Kefei Wen ◽  
TaeWon Seo ◽  
Jeh Won Lee
Keyword(s):  
Jacobian Matrix ◽  
Screw Theory ◽  
Geometric Approach ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Singular Configurations ◽  
Cayley Algebra ◽  
Grassmann Cayley Algebra ◽  
Planar Parallel Manipulators

SUMMARYSingular configurations of parallel manipulators (PMs) are special poses in which the manipulators cannot maintain their inherent infinite rigidity. These configurations are very important because they prevent the manipulator from being controlled properly, or the manipulator could be damaged. A geometric approach is introduced to identify singular conditions of planar parallel manipulators (PPMs) in this paper. The approach is based on screw theory, Grassmann–Cayley Algebra (GCA), and the static Jacobian matrix. The static Jacobian can be obtained more easily than the kinematic ones in PPMs. The Jacobian is expressed and analyzed by the join and meet operations of GCA. The singular configurations can be divided into three classes. This approach is applied to ten types of common PPMs consisting of three identical legs with one actuated joint and two passive joints.

A new family of spherical parallel manipulators

Robotica ◽  
2002 ◽  
Vol 20 (4) ◽  
pp. 353-358 ◽  
Author(s):  
Raffaele Di Gregorio
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
End Effector ◽  
Singular Configurations ◽  
New Family ◽  
Geometric Conditions ◽  
Singularity Locus ◽  
The Given ◽  
Spherical Parallel Manipulator ◽  
Spherical Motion

In the literature, 3-RRPRR architectures were proposed to obtain pure translation manipulators. Moreover, the geometric conditions, which 3-RRPRR architectures must match, in order to make the end-effector (platform) perform infinitesimal (elementary) spherical motion were enunciated. The ability to perform elementary spherical motion is a necessary but not sufficient condition to conclude that the platform is bound to accomplish finite spherical motion, i.e. that the mechanism is a spherical parallel manipulator (parallel wrist). This paper demonstrates that the 3-RRPRR architectures matching the geometric conditions for elementary spherical motion make the platform accomplish finite spherical motion, i.e. they are parallel wrists (3-RRPRR wrist), provided that some singular configurations, named translation singularities, are not reached. Moreover, it shows that 3-RRPRR wrists belong to a family of parallel wrists which share the same analytic expression of the constraints which the legs impose on the platform. Finally, the condition that identifies all the translation singularities of the mechanisms of this family is found and geometrically interpreted. The result of this analysis is that the translation singularity locus can be represented by a surface (singularity surface) in the configuration space of the mechanism. Singularity surfaces drawn by exploiting the given condition are useful tools in designing these wrists.

Determination of singularity contours for five-bar planar parallel manipulators

Robotica ◽  
2000 ◽  
Vol 18 (5) ◽  
pp. 569-575 ◽  
Author(s):  
Gürsel Alıcı
Keyword(s):  
Parallel Manipulators ◽  
Joint Space ◽  
Point Of View ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Singular Configurations ◽  
Planning And Design ◽  
Prismatic Joints ◽  
Planar Parallel Manipulators

From a design point of view, it is crucial to predict singular configurations of a manipulator in terms of inputs in order to improve the dexterity and workspace of a manipulator. In this paper, we present a simple, yet a systematic appoach to obtain singularity contours for a class of five-bar planar parallel manipulators which are based on five rigid links and five single degree of freedom joints – revolute and prismatic joints. The determinants of the manipulator Jacobian matrices are evaluated in terms of joint inputs for a specified set of geometric parameters, and the contours of the determinants at 0.0 plane which are the singularity contours in joint space are generated for the three types of singularities reported in the literature. The proposed approach/algorithm is simple and systematic, and the resulting equations are easy to solve on a computer. The singularity contours for all the class are presented in order to demonstrate the method. It is concluded that the proposed method is useful in trajectory planning and design of five-bar planar parallel manipulators in order to improve their dexterity and workspace.

Singularity-Free Taskspace Optimization of 6-RSS Mechanisms

2009 ◽  
Author(s):  
Hao Li ◽  
Yuru Zhang ◽  
Yi Yang
Keyword(s):  
Design Of Experiment ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Optimization Process ◽  
Singular Configurations ◽  
Reachable Workspace ◽  
Design Variables ◽  
Structured Optimization

A method to calculate the volume of constant-orientation taskspace of parallel manipulators is developed and applied on the 6-RSS mechanism as an example. The taskspace is defined as a singularity-free reachable workspace. Quasi-singularity measure is used to measure the closeness to singular configurations and construct the quasi-singularity zone. Analyzed by DOE (Design of Experiment), effect weighs of design variables of a parallel manipulator are revealed and experiment results are applied in the optimization process. In order to obtain the maximum taskspace, the volume of the constant-orientation taskspace is optimized by a structured optimization process aided by iSIGHT-FD software. Finally, constant-orientation taskspace of greater volume is obtained.

scholarly journals SINGULARITY ANALYSIS OF A 3-PRRR KINEMATICALLY REDUNDANT PLANAR PARALLEL MANIPULATOR

1970 ◽  
Vol 41 (1) ◽  
pp. 1-6 ◽  
Author(s):  
Soheil Zarkandi
Keyword(s):  
Motion Control ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Redundant Manipulators ◽  
Static Behavior ◽  
Singular Configurations ◽  
Planar Parallel Manipulator ◽  
And Control ◽  
Planar Parallel Manipulators

Finding Singular configurations (singularities) is one of the mandatory steps during the design and control of mechanisms. Because, in these configurations, the instantaneous kinematics is locally undetermined that causes serious problems both to static behavior and to motion control of the mechanism. This paper addresses the problem of determining singularities of a 3-PRRR kinematically redundant planar parallel manipulator by use of an analytic technique. The technique leads to an input –output relationship that can be used to find all types of singularities occurring in this type of manipulators.Key Words: Planar parallel manipulators; Redundant manipulators; Singularity analysis; Jacobian matrices.DOI: 10.3329/jme.v41i1.5356Journal of Mechanical Engineering, Vol. ME 41, No. 1, June 2010 1-6

Application of Workspace Generation Techniques to Determine the Unconstrained Motion of Parallel Manipulators

2004 ◽  
Vol 126 (2) ◽  
pp. 283-290 ◽  
Author(s):  
Philip Voglewede ◽  
Imme Ebert-Uphoff
Keyword(s):  
Large Class ◽  
General Framework ◽  
Parallel Manipulators ◽  
End Effector ◽  
Singular Configurations ◽  
Joint Clearances ◽  
Generation Problem ◽  
Unconstrained Motion

Due to clearances in their passive joints, parallel manipulators always exhibit some unconstrained motion at the end effector. The amount of unconstrained motion depends on the pose of the manipulator and can increase significantly at or near singular configurations. This paper shows precisely how much unconstrained end effector motion exists at the end effector for a large class of parallel manipulators, namely those with passive revolute and/or spherical joints, if all the joint clearances are known. This includes the planar 3R_RR, and, in approximation the Gough-Stewart and the Hexa manipulators. For the analysis, the passive joints are assumed to be revolute or spherical because these are the simplest cases. However, the general framework also applies to other joint types, although leading to more complex calculations. For most manipulators, determining the amount of end effector motion can be transformed to a workspace generation problem. Therefore, general workspace generation techniques can be utilized.

Sign in / Sign up

Export Citation Format

Share Document