Use of natural ventilation in reducing building energy consumption in single-family housing in Brazil

2012 ◽  
Author(s):  
Francisco Massucci Silveira ◽  
Lucila Chebel Labaki
Keyword(s):  
Energy Consumption ◽  
Natural Ventilation ◽  
Building Energy ◽  
Building Energy Consumption ◽  
Single Family ◽  
Family Housing

Energy-saving parameterized design of buildings based on genetic algorithm

2020 ◽  
Vol 38 (5) ◽  
pp. 785-795 ◽  
Author(s):  
Kele Zhang
Keyword(s):  
Genetic Algorithm ◽  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Saving ◽  
Natural Ventilation ◽  
Model Building ◽  
Building Energy ◽  
Building Energy Consumption ◽  
Content Type ◽  
Building Parameters

PurposeWith the problem of environment and energy becoming prominent, energy conservation and emission reduction have received more attention. In the using process, buildings not only have the inherent energy consumption but also have the energy consumption of equipment that is installed for improving the indoor environment. This study aims to investigate how to reduce the energy consumption of buildings through utilizing natural resources.Design/methodology/approachThis paper briefly introduces three objective functions in the building energy-saving model: building energy consumption, natural lighting and natural ventilation. Genetic algorithm was used to optimize the building parameters to achieve energy conservation and comfort improvement. Then a two-story rental building was analyzed.FindingsThe genetic algorithm converged to Pareto optimal solution set after 10,000 times of iterations, which took 61024 s. The lowest energy consumption of the scheme that was selected from the 70 optimal solutions was 5580 W/(m2K), the lighting coefficient was 5.56% and Pressure Difference Pascal Hours (PDPH) was 6453 h; compared with the initial building parameters, the building energy consumption reduced by 3.40%, the lighting coefficient increased by 11.65% and PDPH increased by 9.54%.Originality/valueIn short, the genetic algorithm can effectively optimize the energy-saving parameters of buildings.

scholarly journals Development and evaluation of a building energy model integrated in the TEB scheme

2012 ◽  
Vol 5 (2) ◽  
pp. 433-448 ◽  
Author(s):  
B. Bueno ◽  
G. Pigeon ◽  
L. K. Norford ◽  
K. Zibouche ◽  
C. Marchadier
Keyword(s):  
Energy Consumption ◽  
Air Conditioning ◽  
Natural Ventilation ◽  
Urban Climate ◽  
Internal Heat ◽  
Building Energy ◽  
Energy Model ◽  
System Capacity ◽  
Building Energy Consumption ◽  
Air Conditioning Systems

Abstract. The use of air-conditioning systems is expected to increase as a consequence of global-scale and urban-scale climate warming. In order to represent future scenarios of urban climate and building energy consumption, the Town Energy Balance (TEB) scheme must be improved. This paper presents a new building energy model (BEM) that has been integrated in the TEB scheme. BEM-TEB makes it possible to represent the energy effects of buildings and building systems on the urban climate and to estimate the building energy consumption at city scale (~10 km) with a resolution of a neighbourhood (~100 m). The physical and geometric definition of buildings in BEM has been intentionally kept as simple as possible, while maintaining the required features of a comprehensive building energy model. The model considers a single thermal zone, where the thermal inertia of building materials associated with multiple levels is represented by a generic thermal mass. The model accounts for heat gains due to transmitted solar radiation, heat conduction through the enclosure, infiltration, ventilation, and internal heat gains. BEM allows for previously unavailable sophistication in the modelling of air-conditioning systems. It accounts for the dependence of the system capacity and efficiency on indoor and outdoor air temperatures and solves the dehumidification of the air passing through the system. Furthermore, BEM includes specific models for passive systems, such as window shadowing devices and natural ventilation. BEM has satisfactorily passed different evaluation processes, including testing its modelling assumptions, verifying that the chosen equations are solved correctly, and validating the model with field data.

scholarly journals Research on the Impact of Wind Angles on the Residential Building Energy Consumption

2014 ◽  
Vol 2014 ◽  
pp. 1-15 ◽  
Author(s):  
Zou Huifen ◽  
Yang Fuhua ◽  
Zhang Qian
Keyword(s):  
Energy Consumption ◽  
Heat Loss ◽  
Indoor Air ◽  
Wind Direction ◽  
Natural Ventilation ◽  
Building Energy ◽  
Simulation Software ◽  
Outdoor Environment ◽  
Building Energy Consumption ◽  
The Impact

Wind angles affect building’s natural ventilation and also energy consumption of the building. In winter, the wind direction in the outdoor environment will affect heat loss of the building, while in summer the change of wind direction and speed in the outdoor environment will affect the building’s ventilation and indoor air circulation. So, making a good deal with the issue of the angle between local buildings and the dominant wind direction can effectively solve the winter and summer ventilation problems. Thereby, it can enhance the comfort of residential person, improve indoor air quality, solve heat gain and heat loss problems in winter and summer in the severely cold and cold regions, and reduce building energy consumption. The simulation software CFD and energy simulation software are used in the paper. South direction of the building is the prototype of the simulation. The angle between the direction of the building and the outdoor environment wind is changed sequentially. Energy consumption under different wind angle conditions is compared with each other. Combined with natural ventilation under various wind angles, the paper gives the best recommended solution of building direction in Shenyang.

scholarly journals Development and evaluation of a building energy model integrated in the TEB scheme

2011 ◽  
Vol 4 (4) ◽  
pp. 2973-3011 ◽  
Author(s):  
B. Bueno ◽  
G. Pigeon ◽  
L. K. Norford ◽  
K. Zibouche
Keyword(s):  
Energy Consumption ◽  
Air Conditioning ◽  
Natural Ventilation ◽  
Urban Climate ◽  
Internal Heat ◽  
Building Energy ◽  
Energy Model ◽  
System Capacity ◽  
Building Energy Consumption ◽  
Air Conditioning Systems

Abstract. The use of air-conditioning systems is expected to increase as a consequence of global-scale and urban-scale climate warming. In order to represent future scenarios of urban climate and building energy consumption, the Town Energy Budget (TEB) scheme must be improved. This paper presents a new building energy model (BEM) that has been integrated in the TEB scheme. BEM-TEB makes it possible to represent the energy effects of buildings and building systems on the urban climate and to estimate the building energy consumption at city scale (~10 km) with a resolution of a neighbourhood (~100 m). The physical and geometric definition of buildings in BEM has been intentionally kept as simple as possible, while maintaining the required features of a comprehensive building energy model. The model considers a single thermal zone, where the thermal inertia of building materials associated with multiple levels is represented by a generic thermal mass. The model accounts for heat gains due to transmitted solar radiation, heat conduction through the enclosure, infiltration, ventilation, and internal heat gains. As a difference with respect to other building parameterizations used in urban climate, BEM includes specific models for real air-conditioning systems. It accounts for the dependence of the system capacity and efficiency on indoor and outdoor air temperatures and solves the dehumidification of the air passing through the system. Furthermore, BEM includes specific models for passive systems, such as window shadowing devices and natural ventilation. BEM has satisfactorily passed different evaluation processes, including testing its modelling assumptions, verifying that the chosen equations are solved correctly, and validating the model with field data.

scholarly journals Review on Urban Heat Island in China: Methods, Its Impact on Buildings Energy Demand and Mitigation Strategies

2021 ◽  
Vol 13 (2) ◽  
pp. 762
Author(s):  
Liu Tian ◽  
Yongcai Li ◽  
Jun Lu ◽  
Jue Wang
Keyword(s):  
Energy Consumption ◽  
Urban Heat Island ◽  
Building Energy ◽  
Design Stage ◽  
Heat Island ◽  
Building Energy Consumption ◽  
Rapid Urbanization ◽  
Substantial Impact ◽  
Urban Heat ◽  
The Impact

High population density, dense high-rise buildings, and impervious pavements increase the vulnerability of cities, which aggravate the urban climate environment characterized by the urban heat island (UHI) effect. Cities in China provide unique information on the UHI phenomenon because they have experienced rapid urbanization and dramatic economic development, which have had a great influence on the climate in recent decades. This paper provides a review of recent research on the methods and impacts of UHI on building energy consumption, and the practical techniques that can be used to mitigate the adverse effects of UHI in China. The impact of UHI on building energy consumption depends largely on the local microclimate, the urban area features where the building is located, and the type and characteristics of the building. In the urban areas dominated by air conditioning, UHI could result in an approximately 10–16% increase in cooling energy consumption. Besides, the potential negative effects of UHI can be prevented from China in many ways, such as urban greening, cool material, water bodies, urban ventilation, etc. These strategies could have a substantial impact on the overall urban thermal environment if they can be used in the project design stage of urban planning and implemented on a large scale. Therefore, this study is useful to deepen the understanding of the physical mechanisms of UHI and provide practical approaches to fight the UHI for the urban planners, public health officials, and city decision-makers in China.

Sign in / Sign up

Export Citation Format

Share Document