Time Dependent 3D Large Eddy Simulation of a DC Non-Transferred Arc Plasma Spraying Torch with Particle Injection

2007 ◽  
Author(s):  
E. Ghedini ◽  
V. Colombo
Keyword(s):  
Large Eddy Simulation ◽  
Plasma Spraying ◽  
Time Dependent ◽  
Arc Plasma ◽  
Particle Injection ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Transferred Arc

Large-Eddy Simulation of Unsteady Surface Pressure Over a LP Turbine Blade Due to Interactions of Passing Wakes and Inflexional Boundary Layer

2005 ◽  
Author(s):  
S. Sarkar ◽  
Peter R. Voke
Keyword(s):  
Large Eddy Simulation ◽  
Turbine Blade ◽  
Coherent Structures ◽  
Pressure Fluctuations ◽  
Time Dependent ◽  
Suction Surface ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Grid Points ◽  
Lp Turbine

The unsteady pressure over the suction surface of a modern low-pressure (LP) turbine blade subjected to periodically passing wakes from a moving bar wake generator is described. The results presented are a part of detailed Large-Eddy Simulation (LES) following earlier experiments over the T106 profile for a Reynolds number of 1.6×105 (based on the chord and exit velocity) and the cascade pitch to chord ratio of 0.8. The present LES uses coupled simulations of cylinder for wake, providing four-dimensional inflow conditions for successor simulations of wake interactions with the blade. The three-dimensional, time-dependent, incompressible Navier-Stokes equations in fully covariant form are solved with 2.4×106 grid points for the cascade and 3.05×106 grid points for the cylinder using a symmetry-preserving finite difference scheme of second-order spatial and temporal accuracy. A separation bubble on the suction surface of the blade was found to form under the steady state condition. Pressure fluctuations of large amplitude appear on the suction surface as the wake passes over the separation region. Enhanced receptivity of perturbations associated with the inflexional velocity profile is the cause of instability and coherent vortices appear over the rear half of the suction surface by the rollup of shear layer via Kelvin-Helmholtz (K-H) mechanism. Once these vortices are formed, the steady-flow separation changes remarkably. These coherent structures embedded in the boundary amplify before breakdown while traveling downstream with a convective speed of about 37 percent of the local free-stream speed. The vortices play an important role in the generation of turbulence and thus to decide the transitional length, which becomes time-dependent. The source of the pressure fluctuations on the rear part of the suction surface is also identified as the formation of these coherent structures. When compared with experiments, it reveals that LES is worth pursuing as an understanding of the eddy motions and interactions is of vital importance for the problem.

Large-Eddy Simulation of Unsteady Surface Pressure Over a Low-Pressure Turbine Blade due to Interactions of Passing Wakes and Inflexional Boundary Layer

2005 ◽  
Vol 128 (2) ◽  
pp. 221-231 ◽  
Author(s):  
S. Sarkar ◽  
Peter R. Voke
Keyword(s):  
Boundary Layer ◽  
Large Eddy Simulation ◽  
Turbine Blade ◽  
Coherent Structures ◽  
Pressure Fluctuations ◽  
Time Dependent ◽  
Suction Surface ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Grid Points

The unsteady pressure over the suction surface of a modern low-pressure (LP) turbine blade subjected to periodically passing wakes from a moving bar wake generator is described. The results presented are a part of detailed large-eddy simulation (LES) following earlier experiments over the T106 profile for a Reynolds number of 1.6×105 (based on the chord and exit velocity) and the cascade pitch to chord ratio of 0.8. The present LES uses coupled simulations of cylinder for wake, providing four-dimensional inflow conditions for successor simulations of wake interactions with the blade. The three-dimensional, time-dependent, incompressible Navier-Stokes equations in fully covariant form are solved with 2.4×106 grid points for the cascade and 3.05×106 grid points for the cylinder using a symmetry-preserving finite difference scheme of second-order spatial and temporal accuracy. A separation bubble on the suction surface of the blade was found to form under the steady state condition. Pressure fluctuations of large amplitude appear on the suction surface as the wake passes over the separation region. Enhanced receptivity of perturbations associated with the inflexional velocity profile is the cause of instability and coherent vortices appear over the rear half of the suction surface by the rollup of shear layer via Kelvin-Helmholtz (KH) mechanism. Once these vortices are formed, the steady-flow separation changes remarkably. These coherent structures embedded in the boundary layer amplify before breakdown while traveling downstream with a convective speed of about 37% of the local free-stream speed. The vortices play an important role in the generation of turbulence and thus to decide the transitional length, which becomes time dependent. The source of the pressure fluctuations on the rear part of the suction surface is also identified as the formation of these coherent structures. When compared with experiments, it reveals that LES is worth pursuing as an understanding of the eddy motions and interactions is of vital importance for the problem.

Sign in / Sign up

Export Citation Format

Share Document