Transmission lines induced currents in human bodies using charge simulation method

2012 ◽  
Author(s):  
Muhammad Waqas Khalid ◽  
Zakariya Al Hamouz
Keyword(s):  
Transmission Lines ◽  
Simulation Method ◽  
Charge Simulation Method ◽  
Induced Currents

Calculation of Capacitance Variation in Corona Cage

2015 ◽  
Vol 740 ◽  
pp. 405-410
Author(s):  
Xiao Ming Li ◽  
Yong Zhong Pan ◽  
Hong Jun Li ◽  
Jie Shuai Ren ◽  
Po Hu ◽  
...  
Keyword(s):  
Electric Field ◽  
Transmission Lines ◽  
Simulation Method ◽  
Calculation Model ◽  
Meteorological Conditions ◽  
Charge Simulation Method ◽  
Tight Coupling ◽  
Space Charges ◽  
Supplementary Method ◽  
Capacitance Variation

Corona cage is an important supplementary method for studying corona phenomenon, which is an indispensable for designing transmission lines. In this paper, the bundle conductors are chosen as research objects and the charge simulation method (CSM) is applied to build calculation model, using line electric charges to simulate bundle conductors, walls of corona cage and space charges. The method of tight coupling of electric field and potential is first introduced in corona processing, in which the Kaptzov hypothesis is directly applied to establish equations of charge - electric field and charge - electric potential. In addition, in order to analyze the capacitance value variation of corona cage when corona onset occurs, the emission, migration and composite process of space charges is simulated. Finally, 4, 8, 12 conductors in corona cage under different meteorological conditions are modeled, and the research results are analyzed. This research can also be applied to model corona cage and high voltage transmission lines at different voltage levels and different bundles under different meteorological conditions.

Study on Distribution Model of Electric Field for 220 kV Transmission Lines and Implement

2013 ◽  
Vol 860-863 ◽  
pp. 2315-2319
Author(s):  
Guang Zhou Zhang ◽  
Mu Li ◽  
Gong Da Zhang ◽  
Hu Zhang ◽  
Shu Bo Fang
Keyword(s):  
Field Strength ◽  
Electric Field ◽  
Transmission Line ◽  
Electric Field Strength ◽  
Transmission Lines ◽  
Simulation Method ◽  
Distribution Model ◽  
Charge Simulation Method ◽  
Power Frequency ◽  
Made In

For studying the environment of power frequency electric field near the transmission line, the electric field model of 220kV transmission line was made in charge simulation method. Using the model, the electric field strength nearby the ground that under the lines was calculated and the distribute curves were drew in MATLAB language. The results showed that increasing the height of the conductors to ground, the electric field strength at the same point becomes lower.

scholarly journals PSO/GA Combined with Charge Simulation Method for the Electric Field Under Transmission Lines in 3D Calculation Model

Electronics ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 1140 ◽  
Author(s):  
Ru Wang ◽  
Jin Tian ◽  
Fei Wu ◽  
Zhenhua Zhang ◽  
Haishan Liu
Keyword(s):  
Electric Field ◽  
Relative Error ◽  
Field Intensity ◽  
Transmission Lines ◽  
Optimization Algorithm ◽  
Electric Field Intensity ◽  
Simulation Method ◽  
Calculation Model ◽  
Charge Simulation Method ◽  
High Voltage Engineering

The accurate calculation of electric field intensity under transmission lines is more and more important with the expansion of high voltage engineering, which largely determines the site selection and design of transmission projects. In order to get more accurate results, a methodology of a charge simulation method (CSM) combined with an intelligent optimization algorithm for a 3D calculation model is proposed in this paper. Three key points are emphasized for special mention in this optimized charge simulation method (OCSM). First, the number of sub-segments on the finite length conductor, the position and number of the simulating charge set on a sub-segment are taken as the optimization parameters for unified calculation. Secondly, the fitness function of optimization algorithm is constructed by two values, voltage relative error and electric field intensity relative error. Thirdly, a finite element method (FEM) was used to obtain the electric field intensities, which are compared with the results of the proposed algorithm. A simulation case is carried out on a 3D calculation model of 220 kV transmission lines, which verify the effectiveness of the optimization algorithm. The proposed OCSM solves the parameter optimization problem of CSM in the 3D computational model, which considers physical shape of wire span, and has the advantages of strong global search ability and higher calculation accuracy.

Sign in / Sign up

Export Citation Format

Share Document