scholarly journals Geometric effects on electron cloud

Author(s):  
L. Wang ◽  
A. Chao ◽  
J. Wei
Author(s):  
H. Rose

The scanning transmission electron microscope offers the possibility of utilizing inelastically scattered electrons. Use of these electrons in addition to the elastically scattered electrons should reduce the scanning time (dose) Which is necessary to keep the quantum noise below a certain level. Hence it should lower the radiation damage. For high resolution, Where the collection efficiency of elastically scattered electrons is small, the use of Inelastically scattered electrons should become more and more favorable because they can all be detected by means of a spectrometer. Unfortunately, the Inelastic scattering Is a non-localized interaction due to the electron-electron correlation, occurring predominantly at the circumference of the atomic electron cloud.


MRS Advances ◽  
2020 ◽  
Vol 5 (63) ◽  
pp. 3389-3395
Author(s):  
R. González-Díaz ◽  
D. Fernández-Sánchez ◽  
P. Rosendo-Francisco ◽  
G. Sánchez-Legorreta

AbstractIn this work, the first results of the effects of temperature during the production of Se2- ions and the effect during the interaction of Cd2+ and Se2- ions in the synthesis process of CdSe nanoparticles are presented. The synthesis of CdSe was carried out by the colloidal technique, in the first one we used a temperature of 63 °C to produce Se2- ions and in the second one an interaction temperature of 49 °C. The samples were characterized using a Scanning Electron Microscope (SEM) and a Scanning Tunneling Microscope (STM). From the SEM micrographs it was possible to identify the thorns formation and irregular islands. STM micrographs reveal elliptical shapes with a regular electron cloud profile.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Anthony K. C. Tan ◽  
Pin Ho ◽  
James Lourembam ◽  
Lisen Huang ◽  
Hang Khume Tan ◽  
...  

AbstractMagnetic skyrmions are nanoscale spin textures touted as next-generation computing elements. When subjected to lateral currents, skyrmions move at considerable speeds. Their topological charge results in an additional transverse deflection known as the skyrmion Hall effect (SkHE). While promising, their dynamic phenomenology with current, skyrmion size, geometric effects and disorder remain to be established. Here we report on the ensemble dynamics of individual skyrmions forming dense arrays in Pt/Co/MgO wires by examining over 20,000 instances of motion across currents and fields. The skyrmion speed reaches 24 m/s in the plastic flow regime and is surprisingly robust to positional and size variations. Meanwhile, the SkHE saturates at ∼22∘, is substantially reshaped by the wire edge, and crucially increases weakly with skyrmion size. Particle model simulations suggest that the SkHE size dependence — contrary to analytical predictions — arises from the interplay of intrinsic and pinning-driven effects. These results establish a robust framework to harness SkHE and achieve high-throughput skyrmion motion in wire devices.


2021 ◽  
Vol 126 (8) ◽  
Author(s):  
G. Pérez-Callejo ◽  
E. V. Marley ◽  
D. A. Liedahl ◽  
L. C. Jarrott ◽  
G. E. Kemp ◽  
...  

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1249
Author(s):  
Yixun Wang ◽  
Yuxiao Luo ◽  
Yuki Kotani ◽  
Seiichiro Tsutsumi

The existing S-N curves by effective notch stress to assess the fatigue life of gusset welded joints can result in reduced accuracy due to the oversimplification of bead geometries. The present work proposes the parametric formulae of stress concentration factor (SCF) for as-welded gusset joints based on the spline model, by which the effective notch stress can be accurately calculated for fatigue resistance assessment. The spline model is also modified to make it applicable to the additional weld. The fatigue resistance of as-welded and additional-welded specimens is assessed considering the geometric effects and weld profiles. The results show that the error of SCFs by the proposed formulae is proven to be smaller than 5%. The additional weld can increase the fatigue life by as great as 9.4 times, mainly because the increasing weld toe radius and weld leg length lead to the smaller SCF. The proposed series of S-N curves, considering different SCFs, can be used to assess the welded joints with various geometric parameters and weld profiles.


2021 ◽  
Author(s):  
Wenjing Yang ◽  
Yanhong Dong ◽  
Hongjian Sun ◽  
Xiaoyan Li

The synthesis and characterization of Fe, Co and Ni complexes supported by silylene ligands in recent ten years are summarized. Due to the decrease of electron cloud density on Si...


2021 ◽  
Vol 523 ◽  
pp. 167599
Author(s):  
Namkyu Kim ◽  
Hee-Sung Han ◽  
Sooseok Lee ◽  
Min-Ji Kim ◽  
Dae-Han Jung ◽  
...  

2015 ◽  
Vol 53 ◽  
pp. 119-128 ◽  
Author(s):  
N. Islam ◽  
B.H. Bradshaw-Hajek ◽  
S.J. Miklavcic ◽  
L.R. White

Author(s):  
A. Shishlo ◽  
Y. Sato ◽  
S. Cousineau ◽  
V. Danilov ◽  
S. Henderson ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document