Numerical study of dispersion tolerance of 43 Gbit/s SOA-MZI based optical 3R regenerators in long-haul transmission lines

2004 ◽  
Author(s):  
J. Nicollet ◽  
B. Lavigne ◽  
O. Leclerc
Keyword(s):  
Transmission Lines ◽  
Numerical Study ◽  
Dispersion Tolerance

scholarly journals NUMERICAL STUDY ON AERODYNAMIC CHARACTERISTICS OF BUNDLE CONDUCTOR FOR UHV BASED ON ALE METHOD

2014 ◽  
Vol 44 (3) ◽  
pp. 237-245
Author(s):  
J. SI ◽  
K. ZHU
Keyword(s):  
Transmission Lines ◽  
Numerical Study ◽  
Experimental Studies ◽  
Reynolds Numbers ◽  
Aerodynamic Characteristics ◽  
Element Discretization ◽  
Critical Range ◽  
The Common ◽  
The Difference ◽  
Circle Model

The bundle conductor is often threatened by the wind-excited or wake-induced vibration generated by vortex shedding. So as to simulate the common fluid–structure nonlinear interaction problems in Ultra-High Voltage (UHV) transmission lines, the N-S equations of incompressible viscous fluid with the ALE description has been adopted to formulate the fluid-solid governing equations in the analogue computation and the 2-bundle and 6bundle sectional models, as well as the deduced finite element discretization scheme of conductor displacement are introduced in the algorithm. Wind tunnel experimental studies are carried out based on the single stranded model, 6-bundle stranded and 6bundle circle model for the focus of aerodynamic characteristics and the difference between stranded cable and circle cable. Results show that solution of numerical model agrees favorably with experimental results. The aerodynamic coefficients decrease significantly within the expected critical range of wind speed or Reynolds numbers and the cables roughness is not the principle factor to the aerodynamic coefficient when the Reynolds numbers belong to the critical region. However, the interference effect of the bundle conductor widely influenced the wind load applied on the surface of each cable.

scholarly journals Words high-frequency drying processes simulation of wooden tangent towers in a vacuum chamber

2021 ◽  
Vol 22 (6) ◽  
pp. 130-142
Author(s):  
A. N. Kachanov ◽  
D. A. Korenkov ◽  
A. A. Revkov ◽  
V. V. Maksimov ◽  
O. V. Vorkunov
Keyword(s):  
Mass Transfer ◽  
Electromagnetic Field ◽  
Transmission Lines ◽  
High Frequency ◽  
Numerical Study ◽  
Technical Problems ◽  
Overhead Transmission Lines ◽  
Study Results ◽  
The Cross ◽  
Lumber Drying

THE PURPOSE. The service life duration of wooden tangent towers used on overhead transmission lines with a voltage of up to 35 kV depends on the quality of lumber drying and subsequent impregnation. The drying of tangent tower workpieces is currently carried out by atmospheric or convective methods and is the longest and one of the energy-consuming stages of their production. At the same time, there are promising electrotechnological drying installations that can reduce the duration and improve drying quality at comparable specific energy costs. Such installations include vacuum high-frequency complexes, the wide introduction of which is complicated by a number of unresolved scientific and technical problems like optimizing vacuum high-frequency drying modes and ensuring electromagnetic field uniformity in long workpieces. The purpose of this article is to obtain mathematical tools that simultaneously describe the cross-effects of electromagnetic phenomena and heat and mass transfer processes in long-sized lumber and contribute to the further solution of these problems. METHODS. The positions of the theory of electromagnetic field, heat mass transfer and heat mass exchange, methods of mathematical modeling were used for this purpose. Also the results of previous studies of electromagnetic field distribution in the cross-section and longitudinal sections of the working chamber loading are taken into account. RESULTS. А one-dimensional mathematical model is obtained. It describes the influence of electromagnetic wave distribution along the length of tangent towers and external medium parameters on the temperature and moisture content in the material. This model is characterized by the possibility of using simple algorithms for analyzing differential equation systems based on the finite differe nce method and requiring less initial data on the drying material properties. CONCLUSION. The obtained by using the proposed model and the method of its analysis the numerical study results are compared with the available experimental data. Based on this comparison it is concluded that the obtained model is adequate and more effective relative to other existing models of vacuum high-frequency drying. Generally, further use of the presented mathematical toolkit to optimize the design and modes of vacuum-high-frequency complexes in the task of drying wooden tangent towers will increase the reliability of overhead transmission lines.

Numerical study of the low-frequency atomic dynamics in a Lennard-Jones glass

1998 ◽  
Vol 77 (2) ◽  
pp. 473-484 ◽  
Author(s):  
M. Sampoli, P. Benassi, R. Dell'Anna,
Keyword(s):  
Numerical Study ◽  
Low Frequency ◽  
Lennard Jones
Sign in / Sign up

Export Citation Format

Share Document