Measurement of Net Ocean Surface Heat Flux, Solar Irradiance and Near-Surface Temperature using a Novel Surface Contact Lagrangian Buoy

OCEANS 2006 ◽  
2006 ◽  
Author(s):  
J. P. Boyle ◽  
Michael Herman ◽  
J. D. DePasqua
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Solar Irradiance ◽  
Surface Heat Flux ◽  
Ocean Surface ◽  
Surface Heat ◽  
Near Surface ◽  
Surface Contact

Laminar Natural Convection About Downward Facing Heated Blunt Bodies to Liquid Metals

1976 ◽  
Vol 98 (2) ◽  
pp. 208-212 ◽  
Author(s):  
G. M. Harpole ◽  
I. Catton
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Series Expansion ◽  
Surface Heat Flux ◽  
Liquid Metals ◽  
Surface Heat ◽  
Surface Shape ◽  
Boundary Layer Equations ◽  
Stagnation Points ◽  
Shape Dependence

The laminar boundary layer equations for free convection over bodies of arbitrary shape (i.e., a three-term series expansion) and with arbitrary surface heat flux or surface temperature are solved in local Cartesian coordinates. Both two-dimensional bodies (e.g., horizontal cylinders) and axisymmetric bodies (e.g., spheres) with finite radii of curvature at their stagnation points are considered. A Blasius series expansion is applied to convert from partial to ordinary differential equations. An additional transformation removes the surface shape dependence and the surface heat flux or surface temperature dependence of the equations. A second-order-correct, finite-difference method is used to solve the resulting equations. Tables of results for low Prandtl numbers are presented, from which local Nusselt numbers can be computed.

scholarly journals Seasonality of Decadal Sea Surface Temperature Anomalies in the Northwestern Pacific

2006 ◽  
Vol 19 (12) ◽  
pp. 2953-2968 ◽  
Author(s):  
Takashi Mochizuki ◽  
Hideji Kida
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Mixed Layer ◽  
Surface Heat Flux ◽  
Heat Budget ◽  
Surface Heat ◽  
Sea Surface ◽  
Northwestern Pacific ◽  
Sst Anomaly

Abstract The seasonality of the decadal sea surface temperature (SST) anomalies and the related physical processes in the northwestern Pacific were investigated using a three-dimensional bulk mixed layer model. In the Kuroshio–Oyashio Extension (KOE) region, the strongest decadal SST anomaly was observed during December–February, while that of the central North Pacific occurred during February–April. From an examination of the seasonal heat budget of the ocean mixed layer, it was revealed that the seasonal-scale enhancement of the decadal SST anomaly in the KOE region was controlled by horizontal Ekman temperature transport in early winter and by vertical entrainment in autumn. The temperature transport by the geostrophic current made only a slight contribution to the seasonal variation of the decadal SST anomaly, despite controlling the upper-ocean thermal conditions on decadal time scales through the slow Rossby wave adjustment to the wind stress curl. When averaging over the entire KOE region, the contribution from the net sea surface heat flux was also no longer significantly detected. By examining the horizontal distributions of the local thermal damping rate, however, it was concluded that the wintertime decadal SST anomaly in the eastern KOE region was rather damped by the net sea surface heat flux. It was due to the fact that the anomalous local thermal damping of the SST anomaly resulting from the vertical entrainment in autumn was considerably strong enough to suppress the anomalous local atmospheric thermal forcing that acted to enhance the decadal SST anomaly.

Instantaneous Local Heat Flux Measurements in a Small Utility Engine

2009 ◽  
Author(s):  
Terry Hendricks ◽  
Jaal Ghandhi ◽  
John Brossman
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Numerical Model ◽  
Surface Temperature ◽  
Heat Transfer Rate ◽  
Surface Heat Flux ◽  
Transfer Rate ◽  
Surface Heat ◽  
High Load ◽  
Flux Measurements

Heat flux measurements were performed in an air-cooled utility engine using a fast-response coaxial-type surface thermocouple. The surface heat flux was calculated using both analytical and numerical models. The heat flux was found to be a strong function of engine load. The peak heat flux and initial heat flux rise rate increase with engine load. The measured heat flux data were used to estimate a global heat transfer rate, and this was compared with the heat transfer rate calculated by a single-zone heat release analysis. The measured values of heat transfer were higher than the calculated values largely because of the lack of spatial averaging. The high load data showed an unexplainable negative heat flux during the expansion stroke while the gas temperature was still high. A 1D and 2D finite difference numerical model utilizing an adaptive timestep Crank-Nicholson (CN) integration routine was developed to investigate the surface temperature measurement. Applying the measured surface temperature profile to the 1D model, the resultant surface heat flux showed excellent agreement with the analytical inversion solution and captured the reversal of the energy flow back into the cylinder during the expansion stroke. The 2D numerical model was developed to observe transient lateral conduction effects within the probe and incorporated the various materials used in the construction and assembly of the heat flux sensor. The resulting average heat flux profile for the test case is shown to be slightly higher in peak and longer in duration when compared with the results from the 1D analytical inversion, and this is attributed to contributions from the high thermal diffusivity constituents in the sensor. Furthermore, the negative heat flux at high load was not eliminated suggesting that factors other than lateral conduction may be affecting the measurement accuracy.

scholarly journals Surface Heterogeneity Effects on Regional-Scale Fluxes in Stable Boundary Layers: Surface Temperature Transitions

2009 ◽  
Vol 66 (2) ◽  
pp. 412-431 ◽  
Author(s):  
Rob Stoll ◽  
Fernando Porté-Agel
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Surface Temperature ◽  
Surface Heat Flux ◽  
Regional Scale ◽  
Potential Temperature ◽  
Surface Heterogeneity ◽  
Surface Heat ◽  
Average Surface ◽  
The Mean

Abstract Large-eddy simulation, with recently developed dynamic subgrid-scale models, is used to study the effect of heterogeneous surface temperature distributions on regional-scale turbulent fluxes in the stable boundary layer (SBL). Simulations are performed of a continuously turbulent SBL with surface heterogeneity added in the form of streamwise transitions in surface temperature. Temperature differences between patches of 6 and 3 K are explored with patch length scales ranging from one-half to twice the equivalent homogeneous boundary layer height. The surface temperature heterogeneity has important effects on the mean wind speed and potential temperature profiles as well as on the surface heat flux distribution. Increasing the difference between the patch temperatures results in decreased magnitude of the average surface heat flux, with a corresponding increase in the mean potential temperature in the boundary layer. The simulation results are also used to test existing models for average surface fluxes over heterogeneous terrain. The tested models fail to fully represent the average turbulent heat flux, with models that break the domain into homogeneous subareas grossly underestimating the heat flux magnitude over patches with relatively colder surface temperatures. Motivated by these results, a new parameterization based on local similarity theory is proposed. The new formulation is found to correct the bias over the cold patches, resulting in improved average surface heat flux calculations.

Effect of Subcooling and Nozzle Diameter on Heat Transfer Characteristics of Downward Facing Hot Surfaces Using Mist Jet

2018 ◽  
Author(s):  
Avadhesh Kumar Sharma ◽  
Monika Meena ◽  
Anirudh Soni ◽  
Santosh K. Sahu
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Stagnation Point ◽  
Surface Heat Flux ◽  
Jet Impingement ◽  
Surface Heat ◽  
Nozzle Diameter ◽  
Initial Surface ◽  
Ir Camera ◽  
Impingement Cooling

The jet impingement cooling is always preferred over the other cooling methods due to its high heat removal capability. However, rapid quenching may lead to the formation of cracks and poor ductility to the quenched surface. Mist jet impingement cooling offers an alternative method to uncontrolled rapid cooling, particularly in steel and electronic industries. In mist cooling, the droplets are atomized by compressed air. Experiments are performed under transient conditions using two full-cone spray nozzles (Lechler Pneumatic atomizing nozzle 136.115.xx.A2 and 136.134.xx.A2) to study the effect of subcooling and nozzle diameter on surface heat flux. The hot surface used for the experiment is a stainless steel foil (AISI-304) of thickness 0.15mm. The initial surface temperature of the plate is maintained at 500±10°C with the help of an AC transformer. Infrared thermal image camera (A655sc, FLIR System) is used for data estimation. The IR camera and the nozzle are positioned on either side of the plate. The variation in surface temperature has been acquired at 8 different spatial points. It has been observed that that as we move away from the stagnation point then irrespective of air and water flow rates surface heat flux decreases. The maximum surface heat flux obtained at the stagnation point. With the increase in diameter surface heat flux increases irrespective of pressure values. The correlation between qm/qstag experimental and predicted values has been shown.

Sign in / Sign up

Export Citation Format

Share Document