Optimization of Wi-Fi access point placement in an indoor environment

2016 ◽  
Author(s):  
Abderrahim Chariete ◽  
Valery Guillet ◽  
Jean-Yves Thiriet
Keyword(s):  
Indoor Environment ◽  
Access Point ◽  
Point Placement

scholarly journals One Slope Model: Efforts to Optimize Wifi Networks in the Office of communication and informatics in Palembang

2020 ◽  
Vol 2 (1) ◽  
pp. 23-32
Author(s):  
Winda Wulandari ◽  
Ari Muzakir
Keyword(s):  
Network Performance ◽  
Access Point ◽  
Wifi Networks ◽  
Coverage Area ◽  
Propagation Models ◽  
Existing Problems ◽  
The One ◽  
The City ◽  
Point Placement

Information technology in the field of transmission that is currently developing, one of which is Wi-Fi. Wi-Fi devices provide user convenience in carrying out their activities. The quality of Wi-Fi network performance can be known by the reception of the signal received by the user. If the placement of an access point (AP) is done correctly, the network will be optimized. There are several propagation models in the room that can be used as a guideline in determining the placement of the AP, one slope model is a way to measure the average level of a building and only depends on the distance of the transmitter and receiver. This research was conducted in order to overcome the problem of Wi-Fi network area coverage at the Office of Communication and Information of the City of Palembang. This study conducted an experiment to change the layout of AP's placement, measure and calculate data in priority with the one slope model. The results of measurements and calculations carried out analysis and comparison in order to determine the results of the experiments conducted. The results of this study indicate that an attempt to change the AP layout with one slope model can overcome existing problems and get better Wi-Fi coverage area performance. In the calculation with the one slope model of the 2-trial access point placement results in a decrease and an increase in signal. The signal reduction occurred in experiment 1, whereas in experiment 2 (design 2) the signal increased by 1.46dBm.

scholarly journals Access Point Placement Recommendation Using Cost-231 Multiwall Propagation

2020 ◽  
Vol 10 (2) ◽  
pp. 103
Author(s):  
Fransiska Sisilia Mukti
Keyword(s):  
Wave Propagation ◽  
Distribution Pattern ◽  
Radio Wave ◽  
Signal Strength ◽  
Access Point ◽  
Propagation Model ◽  
Radio Wave Propagation ◽  
Signal Distribution ◽  
Point Placement

<p class="JGI-AbstractIsi">This study provides an overview of signal distribution pattern using Cost-231 Multi-Wall (MWM) propagation model. The signal distribution pattern is used as a reference in projecting indoor Access Points (AP) placement in Malang Institute of Asia. The MWM approach estimates the actual radio wave propagation value for measurements are made by considering obstacles between APs and user devices. The study recommends 10 optimal points of AP placement for the 1st, 3rd and 4th-floors, and 7 optimal points for the 2nd-floor. Determination of these placement points was based on the estimated signal strength obtained by users, at -50dBM up to - 10dBm, which is the range for good and excellent signal category.</p>

Sign in / Sign up

Export Citation Format

Share Document