Maximizing the wind power production of DFIG-based wind turbines at low wind speed operation

2008 ◽  
Author(s):  
Ali H. Kasem ◽  
Ehab F. El-Saadany ◽  
Hassan H. El-Tamaly ◽  
Mohamed A. A. Wahab
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Production ◽  
Low Wind Speed

Starting improvement of micro-wind turbines operating in low wind speed regions

2017 ◽  
Vol 14 (11) ◽  
pp. 868-877 ◽  
Author(s):  
Peyman Amir Nazmi Afshar ◽  
Mehdy Gooya ◽  
Seyed Vahid Hosseini ◽  
Abolfazl Pourrajabian
Keyword(s):  
Wind Speed ◽  
Wind Turbines ◽  
Low Wind Speed

scholarly journals Performance Enhancement of Proposed Namaacha Wind Farm by Minimising Losses Due to the Wake Effect: A Mozambican Case Study

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4291
Author(s):  
Paxis Marques João Roque ◽  
Shyama Pada Chowdhury ◽  
Zhongjie Huan
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Output ◽  
Wind Farm ◽  
Wind Farms ◽  
Operating Conditions ◽  
Wake Effect ◽  
Wind Generators ◽  
Wind Potential

District of Namaacha in Maputo Province of Mozambique presents a high wind potential, with an average wind speed of around 7.5 m/s and huge open fields that are favourable to the installation of wind farms. However, in order to make better use of the wind potential, it is necessary to evaluate the operating conditions of the turbines and guide the independent power producers (IPPs) on how to efficiently use wind power. The investigation of the wind farm operating conditions is justified by the fact that the implementation of wind power systems is quite expensive, and therefore, it is imperative to find alternatives to reduce power losses and improve energy production. Taking into account the power needs in Mozambique, this project applied hybrid optimisation of multiple energy resources (HOMER) to size the capacity of the wind farm and the number of turbines that guarantee an adequate supply of power. Moreover, considering the topographic conditions of the site and the operational parameters of the turbines, the system advisor model (SAM) was applied to evaluate the performance of the Vestas V82-1.65 horizontal axis turbines and the system’s power output as a result of the wake effect. For any wind farm, it is evident that wind turbines’ wake effects significantly reduce the performance of wind farms. The paper seeks to design and examine the proper layout for practical placements of wind generators. Firstly, a survey on the Namaacha’s electricity demand was carried out in order to obtain the district’s daily load profile required to size the wind farm’s capacity. Secondly, with the previous knowledge that the operation of wind farms is affected by wake losses, different wake effect models applied by SAM were examined and the Eddy–Viscosity model was selected to perform the analysis. Three distinct layouts result from SAM optimisation, and the best one is recommended for wind turbines installation for maximising wind to energy generation. Although it is understood that the wake effect occurs on any wind farm, it is observed that wake losses can be minimised through the proper design of the wind generators’ placement layout. Therefore, any wind farm project should, from its layout, examine the optimal wind farm arrangement, which will depend on the wind speed, wind direction, turbine hub height, and other topographical characteristics of the area. In that context, considering the topographic and climate features of Mozambique, the study brings novelty in the way wind farms should be placed in the district and wake losses minimised. The study is based on a real assumption that the project can be implemented in the district, and thus, considering the wind farm’s capacity, the district’s energy needs could be met. The optimal transversal and longitudinal distances between turbines recommended are 8Do and 10Do, respectively, arranged according to layout 1, with wake losses of about 1.7%, land utilisation of about 6.46 Km2, and power output estimated at 71.844 GWh per year.

scholarly journals Design and Contruction of Vertical Axis Wind Turbine Triple-Stage Savonius Type as the Alternative Wind Power Plant

KnE Energy ◽  
2015 ◽  
Vol 2 (2) ◽  
pp. 172
Author(s):  
Tedy Harsanto ◽  
Haryo Dwi Prananto ◽  
Esmar Budi ◽  
Hadi Nasbey
Keyword(s):  
Wind Speed ◽  
Power Plant ◽  
Wind Turbine ◽  
Wind Power ◽  
Output Power ◽  
Vertical Axis ◽  
Wind Power Plant ◽  
Vertical Axis Wind Turbine ◽  
Low Wind Speed ◽  
Simple Materials

<p>A vertical axis wind turbine triple-stage savonius type has been created by using simple materials to generate electricity for the alternative wind power plant. The objective of this research is to design a simple wind turbine which can operate with low wind speed. The turbine was designed by making three savonius rotors and then varied the structure of angle on the three rotors, 0˚, 90˚ and 120˚. The dimension of the three rotors are created equal with each rotor diameter 35 cm and each rotor height 19 cm. The turbine was tested by using blower as the wind sources. Through the measurements obtained the comparisons of output power, rotation of turbine, and the level of efficiency generated by the three variations. The result showed that the turbine with angle of 120˚ operate most optimally because it is able to produce the highest output power and highest rotation of turbine which is 0.346 Watt and 222.7 RPM. </p><p><strong>Keywords</strong>: Output power; savonius turbine; triple-stage; the structure of angle</p>

Research on Low-Wind-Speed Wind Power

2013 ◽  
Vol 448-453 ◽  
pp. 1811-1814
Author(s):  
Hai Hui Song ◽  
Jian Jun Wang ◽  
Zhi Hua Hu ◽  
Jin Zhou
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Research Development ◽  
High Wind ◽  
Power Development ◽  
High Wind Speed ◽  
Low Wind Speed ◽  
Key Technologies ◽  
Wind Power Development

For high-wind-speed wind power development and problems, propose development and application of low-wind-speed wind power (LWSP). Analysis of the characteristics of LWSP , advantages and necessity of development and application of it. Research the key technologies of LWSP development. It ultimately lay the foundation for research, development and application of LWSP technologies.

Wind Power Generating Potential at the University of North Texas Campus

2012 ◽  
Author(s):  
Rambod Rayegan ◽  
Yong X. Tao ◽  
Frank Y. Fang
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Power Density ◽  
Wind Turbines ◽  
North Texas ◽  
University Of North Texas ◽  
Average Wind Speed ◽  
Wind Speed Data ◽  
Weather Stations ◽  
The University

This study utilizes two sets of wind speed data at 3 m above the ground surface level retrieved from two on-campus weather stations to study the wind power generating potential at the University of North Texas Campus. Weather stations have been installed approximately 5 miles away from each other. The mean wind speed data of 10 minute intervals in a one-year period from February 1st 2011 to January 31st 2012 has been adopted and analyzed. The numerical values of the dimensionless Weibull shape parameter (k) and Weibull scale parameter (c) have been determined. Monthly average wind speed and standard deviation, power generation, and power density at the sensor level for both locations has been discussed. Lower values of wind speed were found during summer months and higher during spring months. The results show that the wind power density in the area is fair enough to be considered as a renewable power source for the University. Thereafter annual energy production by using two wind turbines with nominal capacities of 100 and 3.5 kW for both weather stations has been studied. Initial costs of using each turbine to maintain power demands of selected buildings have been compared. In order to utilize wind energy, it is recommended to install highly efficient wind turbines for electricity supply of campus buildings with lower power demands. Using grant monies to maintain the initial costs of the installation of wind turbines make them economically more desirable. Since wind power potential is low during summer, PV panels as proper supplements to the power generating system are suggested.

Airfoil design for large horizontal axis wind turbines in low wind speed regions

2020 ◽  
Vol 145 ◽  
pp. 2345-2357 ◽  
Author(s):  
Xingxing Li ◽  
Lei Zhang ◽  
Juanjuan Song ◽  
Fengjiao Bian ◽  
Ke Yang
Keyword(s):  
Wind Speed ◽  
Wind Turbines ◽  
Horizontal Axis ◽  
Low Wind Speed ◽  
Horizontal Axis Wind Turbines
Sign in / Sign up

Export Citation Format

Share Document