Steam turbine fault diagnosis method based on rough set with the back-propagation neural network

2012 ◽  
Author(s):  
Wang Hai-qun ◽  
Gu Xing-sheng
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Steam Turbine ◽  
Rough Set ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Diagnosis Method

scholarly journals Chaotic Extension Neural Network-Based Fault Diagnosis Method for Solar Photovoltaic Systems

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Kuo-Nan Yu ◽  
Her-Terng Yau ◽  
Jian-Yu Li
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Photovoltaic System ◽  
Photovoltaic Systems ◽  
Solar Photovoltaic ◽  
Error Back Propagation ◽  
Point Tracking ◽  
Diagnosis Method

At present, the solar photovoltaic system is extensively used. However, once a fault occurs, it is inspected manually, which is not economical. In order to remedy the defect of unavailable fault diagnosis at any irradiance and temperature in the literature with chaos synchronization based intelligent fault diagnosis for photovoltaic systems proposed by Hsieh et al., this study proposed a chaotic extension fault diagnosis method combined with error back propagation neural network to overcome this problem. It used the nn toolbox of matlab 2010 for simulation and comparison, measured current irradiance and temperature, and used the maximum power point tracking (MPPT) for chaotic extraction of eigenvalue. The range of extension field was determined by neural network. Finally, the voltage eigenvalue obtained from current temperature and irradiance was used for the fault diagnosis. Comparing the diagnostic rates with the results by Hsieh et al., this scheme can obtain better diagnostic rates when the irradiances or the temperatures are changed.

Fault Diagnosis Method for the Rolling Bearing Based on Information Fusion and BP Neural Network

2012 ◽  
Vol 538-541 ◽  
pp. 1956-1961 ◽  
Author(s):  
Jin Min Zhang ◽  
Yin Hua Huang ◽  
Si Ming Wang
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Information Fusion ◽  
Bp Neural Network ◽  
Back Propagation ◽  
Vibration Signal ◽  
Rolling Bearing ◽  
Back Propagation Neural Network ◽  
Weighted Fusion ◽  
Diagnosis Method

Abstract. In order to diagnose the fault of rolling bearing by the vibration signal, a new method of fault diagnosis based on weighted fusion and BP (Back Propagation) neural network was put forward. At first, the vibration signal from the sensors was wave filtered through the method of correlation function, then the fused signal was obtained by the classical adaptive weighted fusion method, the multi-type characteristics parameters was to be as a neural network input. Finally, the fault diagnosis of rolling bearing was realized by the BP neural network, and the results show that the multi-sensor information fusion fault diagnosis method can be proved effectively to achieve the fault diagnosis of rolling bearing.

Fault diagnosis method of peak-load-regulation steam turbine based on improved PCA-HKNN artificial neural network

2021 ◽  
pp. 1748006X2110105
Author(s):  
Yifan Wu ◽  
Wei Li ◽  
Deren Sheng ◽  
Jianhong Chen ◽  
Zitao Yu
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Steam Turbine ◽  
Power Plants ◽  
Peak Load ◽  
Clean Energy ◽  
Steam Turbines ◽  
Peak Shaving ◽  
Diagnosis Method ◽  
Load Regulation

Clean energy is now developing rapidly, especially in the United States, China, the Britain and the European Union. To ensure the stability of power production and consumption, and to give higher priority to clean energy, it is essential for large power plants to implement peak shaving operation, which means that even the 1000 MW steam turbines in large plants will undertake peak shaving tasks for a long period of time. However, with the peak load regulation, the steam turbines operating in low capacity may be much more likely to cause faults. In this paper, aiming at peak load shaving, a fault diagnosis method of steam turbine vibration has been presented. The major models, namely hierarchy-KNN model on the basis of improved principal component analysis (Improved PCA-HKNN) has been discussed in detail. Additionally, a new fault diagnosis method has been proposed. By applying the PCA improved by information entropy, the vibration and thermal original data are decomposed and classified into a finite number of characteristic parameters and factor matrices. For the peak shaving power plants, the peak load shaving state involving their methods of operation and results of vibration would be elaborated further. Combined with the data and the operation state, the HKNN model is established to carry out the fault diagnosis. Finally, the efficiency and reliability of the improved PCA-HKNN model is discussed. It’s indicated that compared with the traditional method, especially handling the large data, this model enhances the convergence speed and the anti-interference ability of the neural network, reduces the training time and diagnosis time by more than 50%, improving the reliability of the diagnosis from 76% to 97%.

Full Information Fusion and its Application in Fault Diagnosis for Rotary Machinery

2011 ◽  
Vol 66-68 ◽  
pp. 1315-1319 ◽  
Author(s):  
Xin Min Dong ◽  
Jie Han ◽  
Wang Shen Hao
Keyword(s):  
Fault Diagnosis ◽  
Information Fusion ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Engineering Practice ◽  
Full Information ◽  
Single Section ◽  
Rotary Machinery ◽  
Diagnosis Method ◽  
Diagnosis Accuracy

The rotor motion and the information fusion of single section were discussed; the fault diagnosis method for rotary machinery based on the full information fusion of two sections was put forward, and the back propagation neural network model was established. Engineering practice indicated that the fault diagnosis accuracy based on the information fusion of two sections was higher than that based on the information fusion of single section.

Sign in / Sign up

Export Citation Format

Share Document