INFLUENCE OF PROCESSING CONDITIONS ON BULK GALLIUM ARSENIDE SWITCH PHOTOCONDUCTIVITY

2005 ◽  
Author(s):  
L.M. Thomas ◽  
V.K. Lakdawala ◽  
S. Panigrahi
Keyword(s):  
Gallium Arsenide ◽  
Processing Conditions

Formation of defects in implanted hipox-structures

1992 ◽  
Vol 50 (2) ◽  
pp. 1406-1407
Author(s):  
Peter Pegler ◽  
N. David Theodore ◽  
Ming Pan
Keyword(s):  
High Pressure ◽  
Cross Section ◽  
Semiconductor Devices ◽  
Silicon Substrates ◽  
Processing Conditions ◽  
Pressure Oxidation ◽  
Deep Trench ◽  
Local Oxidation ◽  
Trench Isolation ◽  
And Behavior

High-pressure oxidation of silicon (HIPOX) is one of various techniques used for electrical-isolation of semiconductor-devices on silicon substrates. Other techniques have included local-oxidation of silicon (LOCOS), poly-buffered LOCOS, deep-trench isolation and separation of silicon by implanted oxygen (SIMOX). Reliable use of HIPOX for device-isolation requires an understanding of the behavior of the materials and structures being used and their interactions under different processing conditions. The effect of HIPOX-related stresses in the structures is of interest because structuraldefects, if formed, could electrically degrade devices.This investigation was performed to study the origin and behavior of defects in recessed HIPOX (RHIPOX) structures. The structures were exposed to a boron implant. Samples consisted of (i) RHlPOX'ed strip exposed to a boron implant, (ii) recessed strip prior to HIPOX, but exposed to a boron implant, (iii) test-pad prior to HIPOX, (iv) HIPOX'ed region away from R-HIPOX edge. Cross-section TEM specimens were prepared in the <110> substrate-geometry.

Progressive Debonding of Multilayer Interconnect Structures

1997 ◽  
Vol 473 ◽  
Author(s):  
Michael Lane ◽  
Robert Ware ◽  
Steven Voss ◽  
Qing Ma ◽  
Harry Fujimoto ◽  
...  
Keyword(s):  
Thin Films ◽  
Crack Growth ◽  
Driving Force ◽  
Adhesion Energy ◽  
Time Dependent ◽  
Multilayer Thin Films ◽  
Processing Conditions ◽  
Interface Morphology ◽  
Entire Sample ◽  
Crack Growth Velocity

ABSTRACTProgressive (or time dependent) debonding of interfaces poses serious problems in interconnect structures involving multilayer thin films stacks. The existence of such subcriticai debonding associated with environmentally assisted crack-growth processes is examined for a TiN/SiO2 interface commonly encountered in interconnect structures. The rate of debond extension is found to be sensitive to the mechanical driving force as well as the interface morphology, chemistry, and yielding of adjacent ductile layers. In order to investigate the effect of interconnect structure, particularly the effect of an adjacent ductile Al-Cu layer, on subcriticai debonding along the TiN/SiO2 interface, a set of samples was prepared with Al-Cu layer thicknesses varying from 0.2–4.0 μm. All other processing conditions remained the same over the entire sample run. Results showed that for a given crack growth velocity, the debond driving force scaled with Al-Cu layer thickness. Normalizing the data by the critical adhesion energy allowed a universal subcriticai debond rate curve to be derived.

EXPERIMENTAL VERIFICATION OF DLTS MODELS

2019 ◽  
Author(s):  
Nataliya Mitina ◽  
Vladimir Krylov
Keyword(s):  
Activation Energy ◽  
Gallium Arsenide ◽  
Data Processing ◽  
Experimental Verification ◽  
Deep Level ◽  
Deep Levels ◽  
Transient Spectroscopy

The results of an experiment to determine the activation energy of a deep level in a gallium arsenide mesastructure, obtained by the method of capacitive deep levels transient spectroscopy with data processing according to the Oreshkin model and Lang model, are considered.

DEEP LEVELS' ACTIVATION ENERGY DEPENDENCE ON MEASUREMENT MODES

2019 ◽  
Author(s):  
Aleksey Bogachev ◽  
Vladimir Krylov
Keyword(s):  
Activation Energy ◽  
Gallium Arsenide ◽  
Energy Dependence ◽  
Deep Level ◽  
Deep Levels ◽  
Blocking Voltage

The results of an experiment to determine the activation energy of a deep level in a gallium arsenide mesastructure by capacitive relaxation spectroscopy of deep levels at various values of the blocking voltage are considered.

Evaluation of the Resistance of Individual Si Die to Cracking

1998 ◽  
Author(s):  
R. Berriche ◽  
R.K. Lowry ◽  
M.I. Rosenfield
Keyword(s):  
Thermal Cycling ◽  
Hardness Test ◽  
Mechanical Stresses ◽  
Test Method ◽  
Processing Conditions ◽  
Micro Hardness ◽  
Test Methodology ◽  
Vickers Micro Hardness

Abstract The present work investigated the use of the Vickers micro-hardness test method to determine the resistance of individual die to cracking. The results are used as an indicator of resistance to failure under the thermal and mechanical stresses of packaging and subsequent thermal cycling. Indentation measurements on die back surfaces are used to determine how changes in wafer backside processing conditions affect cracks that form around impressions produced at different loads. Test methodology and results obtained at different processing conditions are discussed.

Detecting the 10 Angstroms That Change MEMS Performance

2004 ◽  
Author(s):  
Erika Schutte ◽  
Jack Martin
Keyword(s):  
Thin Films ◽  
Device Performance ◽  
Processing Conditions ◽  
Packaging Process ◽  
Mems Sensor ◽  
Process Characterization ◽  
Measurement Protocol ◽  
Mems Device

Abstract An ellipsometry based measurement protocol was developed to evaluate changes to MEMS sensor surfaces which may occur during packaging using unpatterned test samples. This package-level technique has been used to measure the 0-20 Angstrom thin films that can form or deposit on die during the packaging process for a variety of packaging processing conditions. Correlations with device performance shows this to be a useful tool for packaged MEMS device and process characterization.

Gallium Arsenide Integrated Circuits Decapsulation Technique Using Mixed Acid Chemistry For Die-Level Failure Analysis

2018 ◽  
Author(s):  
Harold Jeffrey M. Consigo ◽  
Ricardo S. Calanog ◽  
Melissa O. Caseria
Keyword(s):  
Gallium Arsenide ◽  
Sulfuric Acid ◽  
Nitric Acid ◽  
Integrated Circuits ◽  
Failure Analysis ◽  
Mixed Acid ◽  
Optimum Parameters ◽  
Plastic Package ◽  
Fuming Nitric Acid ◽  
Concentrated Sulfuric Acid

Abstract Gallium Arsenide (GaAs) integrated circuits have become popular these days with superior speed/power products that permit the development of systems that otherwise would have made it impossible or impractical to construct using silicon semiconductors. However, failure analysis remains to be very challenging as GaAs material is easily dissolved when it is reacted with fuming nitric acid used during standard decapsulation process. By utilizing enhanced chemical decapsulation technique with mixture of fuming nitric acid and concentrated sulfuric acid at a low temperature backed with statistical analysis, successful plastic package decapsulation happens to be reproducible mainly for die level failure analysis purposes. The paper aims to develop a chemical decapsulation process with optimum parameters needed to successfully decapsulate plastic molded GaAs integrated circuits for die level failure analysis.

Sign in / Sign up

Export Citation Format

Share Document