Simultaneous gain and bandwidth enhancement of a circularly polarized microstrip patch antenna using a coupled square-shape split ring resonators metamaterial superstrate

2011 ◽  
Author(s):  
Iman Ben Issa ◽  
Mohamed Essaaidi
Keyword(s):  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Ring Resonators ◽  
Split Ring ◽  
Bandwidth Enhancement ◽  
Circularly Polarized ◽  
Split Ring Resonators ◽  
Microstrip Patch

scholarly journals A Single-Layer Wideband Differential-Fed Microstrip Patch Antenna With Complementary Split-Ring Resonators Loaded

IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 132041-132048 ◽  
Author(s):  
Shu Feng ◽  
Li Zhang ◽  
Hong-Wei Yu ◽  
Yi-Xuan Zhang ◽  
Yong-Chang Jiao
Keyword(s):  
Patch Antenna ◽  
Single Layer ◽  
Microstrip Patch Antenna ◽  
Ring Resonators ◽  
Split Ring ◽  
Split Ring Resonators ◽  
Microstrip Patch

scholarly journals Dual Band Octagonal Microstrip Patch Antenna Loaded with Array of Split Ring Resonators

2020 ◽  
pp. 516-524
Author(s):  
A. Sureka Selas ◽  
K. Ayyappan
Keyword(s):  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Antenna Design ◽  
Ring Resonators ◽  
Dual Band ◽  
Installation Space ◽  
Split Ring ◽  
Antenna Structure ◽  
Split Ring Resonators ◽  
Microstrip Patch

This article presents a proposal about an octagonal microstrip patch antenna (MPA) loaded with Split Ring Resonators (SRR) the antenna’s ground part. The antenna size reduction using multiband radiators will suits for miniaturization of day-to-day handheld devices. The dual band behaviour of the antenna will integrate more communication standard in one system which saves the installation space in the device. In this context, an octagonal antenna structure is conceived for a dual operational frequency of 5.63 GHz and 5.97 GHz. Hereby, a Co-planar Waveguide (CPW) structure is adapted to the octagonal patch and the structure has been observed by simulation analysis under HFSS platform. The overall geometry of the antenna is 30 x 26 x 1.6 mm3. The antenna feed using a microstrip for earning a better impedance matching between the antenna and transmission line. The antenna design provides a wider bandwidth of 580MHz and average gain of 3.25 dBm. The attainment of dual band operational frequencies is due to the CPW and SRR structure in the antenna design.

scholarly journals Wideband to concurrent tri-band frequency reconfigurable microstrip patch antenna for wireless communication

2016 ◽  
Vol 9 (4) ◽  
pp. 915-922 ◽  
Author(s):  
Sonia Sharma ◽  
Chandra Charu Tripathi
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Frequency Tuning ◽  
Microstrip Patch Antenna ◽  
Ring Resonators ◽  
Antenna Feed ◽  
Split Ring ◽  
Band Frequency ◽  
Microstrip Patch ◽  
Better Than

This paper proposes a novel wideband to concurrent tri-band frequency reconfigurable microstrip antenna. The frequency reconfiguration is achieved by using a pair of PIN diodes in the antenna feed line to switch the antenna either in wideband mode or in concurrent tri-band mode. In order to improve the bandwidth and gain of the antenna for wideband operation, the properties of J-K inverter and split ring resonators are exploited. To demonstrate the versatility of this concept a prototype is fabricated and tested here. The tested results in wideband mode shows that the proposed antenna operates from 3.58 to –3.82 GHz, which is 4.08 times larger than the bandwidth of a simple microstrip patch antenna. In the concurrent tri-band mode frequency tuning is done by microstrip open stub at 1.5 GHz, 1.9 GHz, and 3.5 GHz. Gain of the proposed antenna is better than 2.7 dB in wideband mode and 2.7 dB in concurrent tri-band mode.

scholarly journals A multiband patch antenna with embedded square split ring resonators in non-Homogeneous substrate

2021 ◽  
Vol 10 (3) ◽  
Author(s):  
Shailesh M. Rao ◽  
Prabhugoud I. Basarkod
Keyword(s):  
Patch Antenna ◽  
Ring Resonator ◽  
Split Ring Resonator ◽  
Microstrip Patch Antenna ◽  
Ring Resonators ◽  
Dual Band ◽  
Parameter Change ◽  
Split Ring ◽  
Microstrip Patch ◽  
Dual Substrate

The authors have attempted to influence an embedded square split ring resonator (SSRR) response in a stacked non-homogeneous substrate to demonstrate a quad-band antenna. The purpose is to produce multiband operations of a microstrip patch antenna. The highlighted factor is the effect of embedding an SSRR and the differing relative permittivity of the substrate on the side length of the SSRR. The analysis shows that a non-homogeneous dual substrate patch produces multiple bands compared to a single substrate patch antenna without any parameter change. A dual substrate antenna fabricated using FR4 and Rogers RT/Duroid 5880 copper clad sheets with a dimension of 85.6x54x0.908 mm3 (0.314λ0x0.198λ0x0.003λ0). The antenna resonates at 1.1, 2.45, 3.65 and 5.25 GHz in the L-, S- and C-bands. It is possible to employ the patch antenna in WLAN (dual-band) and WiMAX applications and suitable for mobile broadcast service at 1.1 GHz. The authors compare the simulated and measured results of a prototype in the article. The maximum measured gain is 5.48 dBi at 1.1 GHz and 4.025 dBi at 3.65 GHz. The measured bandwidth is 60 MHz (1.2%) at 5.25 GHz.

scholarly journals Bandwidth Enhancement of Microstrip Patch Antenna by Using Metamaterial

2020 ◽  
Vol 14 (01) ◽  
pp. 169
Author(s):  
Huthaifa A. Al Issa ◽  
Yahyakhr S. H. Khraisat ◽  
Fatima A. S. Alghazo
Keyword(s):  
Patch Antenna ◽  
Ring Resonator ◽  
Split Ring Resonator ◽  
Microstrip Patch Antenna ◽  
Split Ring ◽  
Bandwidth Enhancement ◽  
Complementary Split Ring Resonator ◽  
Microstrip Patch

<p class="Default"><strong>in this paper we designed microstrip patch antenna by using metamaterial to improve antenna bandwidth. We inserted </strong><strong>Complementary Split Ring Resonator (CSRR) structure between the ground and patch in the substrate. We compared our design with the conventional microstrip patch antenna in point of bandwidth. We obtained bandwidth improvement by 800MHz. Simulation was obtained by using HFSS simulator</strong><strong></strong></p>

Sign in / Sign up

Export Citation Format

Share Document