The experimental research and numerical simulation on flow across bluff body in vertical upward gas-liquid two-phase flow with low liquid volume fraction

2011 ◽  
Author(s):  
Hongjun Sun ◽  
Linfang Wang ◽  
Chao Wang
Keyword(s):  
Numerical Simulation ◽  
Experimental Research ◽  
Bluff Body ◽  
Two Phase Flow ◽  
Volume Fraction ◽  
Liquid Volume ◽  
Phase Flow ◽  
Two Phase ◽  
Liquid Volume Fraction

An Innovative Two-Phase Flow Pump and Separator Solution

2011 ◽  
Author(s):  
Franc¸ois Gruselle ◽  
Johan Steimes ◽  
Patrick Hendrick
Keyword(s):  
Flow Rate ◽  
Flow Model ◽  
Two Phase Flow ◽  
Volume Fraction ◽  
Operating Conditions ◽  
Liquid Volume ◽  
Phase Flow ◽  
Two Phase ◽  
Efficient System ◽  
Measurement Systems

The Aero-Thermo-Mechanics (ATM) department of Universite´ Libre de Bruxelles (ULB) develops a new system to simultaneously pump and separate a two-phase flow, in particular oil/air mixtures. Two-phase flows are encountered in many applications (oil extraction, flow in nuclear power plant pumps, pulp and paper processing) but the study is mainly focused on aeroengine lubrication systems. The main objective is to obtain a compact and efficient system that can both extract the gas of a two-phase flow and increase the pressure of the liquid phase. Particular care is given to the liquid flow rate lost at the gas outlet of the system. A large range of gas/liquid volume ratio has been studied, leading to different two-phase flow regimes at the inlet of the system (slug, churn or annular flow). After successful tests with water-air prototypes, which have allowed to identify the key design and working parameters, the technology has been implemented for a hot oil-air mixture. This paper presents the test results of the first oil/air prototype under real in-flight operating conditions. The tests with oil/air mixtures were performed on the aeroengine lubrication system test bench of the ATM department. The identification and implementation of appropriate two-phase flow rate measurement systems is an essential contribution to the project. Two attractive measurement systems have been considered: a Coriolis density meter for the volume fraction at the liquid outlet and radio-tracing elements for the measurement of the oil consumption at the air outlet. In parallel, the flow field in the pump and separator system has been studied with commercial CFD (Computational Fluid Dynamics) software packages. The choice of the two-phase flow model is highly dependent on the two-phase flow regime. But different regimes can simultaneously exist in the pump and separator system. So, the Eulerian two-phase flow model, the most complex and general model, seems to be the most appropriate. A coupling of this model with a dispersed phase model is under investigation to take all two-phase flow phenomena into account.

An Analytical Two-Phase Flow Model for Prediction of Leakage in Wet Gas Labyrinth Seals and Pocket Damper Seals. Is Simplicity Still Desired?

2021 ◽  
Author(s):  
Jing Yang ◽  
Luis San Andrés
Keyword(s):  
Simple Model ◽  
Two Phase Flow ◽  
Volume Fraction ◽  
Liquid Volume ◽  
Gas Mixture ◽  
Phase Flow ◽  
Rotor Speed ◽  
Labyrinth Seals ◽  
Two Phase ◽  
Wet Gas

Abstract Current and upcoming two-phase pump and compression systems in subsea production facilities must demonstrate long-term operation and continuous availability. Annular pressure seals, limiting secondary flow, also influence the dynamic stability of turbomachinery. Hence, it becomes paramount to quantify the leakage and dynamic force coefficients of annular seals operating with two-phase flow, a liquid in gas mixture or wet gas. Until now, a simple model for labyrinth seals (LSs) and the more modern pocket damper seals (PDSs) is not available, though these seal types find wide applications in subsea machinery. The paper develops a simple analytical model predicting the leakage and cavity pressures for LSs and PDSs operating with two-phase flow. The model adapts Neumann’s leakage equation for use with the physical properties of a homogeneous two-phase flow mixture. Predictions of leakage for a four-blade, eight-pocket, fully partitioned PDS operating under a low supply pressure (PS = 2.3 bar and 3.2 bar) and a low rotor speed equal to 5,250 rpm (surface speed = 35 m/s) agree well with experimental results procured for both a pure gas and a wet gas conditions (2.2% in liquid volume). Predicted leakage and cavity pressures also agree with those found by a multi-million node computational fluid dynamics (CFD) model. For an eight-blade, sixteen-pocket PDS supplied with air at PS = 62.1 bar, discharge pressure Pa = 31.1 bar and rotor speed of 15 krpm (surface speed = 91 m/s), the analytical model predicts leakage that is just 2% larger than a published CFD prediction. For the PDS supplied with an oil in gas mixture having gas volume fraction βS = 0.92 ∼ 0.98, the simple model delivers leakage that is up to ∼ 6% lower than published CFD results. An analysis of the two-phase leakage predictions via a modified flow factor reveals a loss coefficient (cd) impervious to the range of supply and discharge pressures considered and growing in proportion to the liquid volume fraction. Throughout the life of an oil well that sees radical changes in gas and liquid composition as well as pressure conditions, the expedient model, quick and accurate to estimate leakage in wet gases seals, can be readily integrated into an engineering routine or practice.

Sign in / Sign up

Export Citation Format

Share Document