Study on inhibition of the M-Type Cathode edge emission in the high frequency vacuum electronic devices

Author(s):  
Hui Wang ◽  
Pengyun Yang ◽  
Wensheng Shao ◽  
Ke Zhang ◽  
Gaoyu Juan
Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 653
Author(s):  
Tongbin Yang ◽  
Xiaotong Guan ◽  
Wenjie Fu ◽  
Dun Lu ◽  
Chaoyang Zhang ◽  
...  

The pill-box window is one of the important components of microwave vacuum electronic devices (VEDs), and research into it is of great significance. As the operating frequency increases, the problems associated with the reduction in the structure size include the reduction of the brazing plane and the reduction in the tolerance of the pill-box window. These problems will cause traditional pill-box windows to be unsuitable in high-frequency bands, especially in terahertz and sub-terahertz regions. The most influential factor is the length of the circular waveguide in the box window. The welding plane of the over-size pill-box window is the annular bottom surface on both sides of the dielectric sheet, which is larger than the circular waveguide, and the operating frequency does not directly affect the area of the brazing surface. Choosing a suitable diameter for the dielectric sheet can effectively increase the tolerance to the length of the pill-box window circular waveguide. Therefore, an over-size pill-box window would be a practicable approach to improve the performance compared to the traditional pillow-box in high-frequency bands. This paper describes, in detail, the theoretical design, simulation optimization and experimental process of this improved pill-box window. An over-size pill-box window suitable for G band VEDs was successfully developed. The experimental result in the 215–225 GHz band is that the maximum transmission loss is −1 dB, and the overall transmission loss is close to −0.5 dB. The overall reflection is less than −11 dB.


Author(s):  
A. A. Korneev

The article presents the results of the study of the filament modes of electronic lamps and ensuring the rational temperature of the cathode. A brief description and comparative analysis of existing methods with the proposed author are given. The dependence diagrams obtained as a result of a real experiment are presented. A new method of rational control of the electric vacuum devices (EVP) filament mode is proposed, thereby increasing the reliability and increasing the durability of the EVP during operation in high-quality and expensive complex technical systems. According to the results of the study, a new specialized electronic device was developed, which allowed to smoothly regulate the supply of the filament voltage, thereby ensuring the rational control of the operation of the EVP. The technique and specialized electronic device are developed on the basis of modern scientific and technical achievements. This made it possible to increase the reliability and efficiency of the electronic control system for solving critical tasks. When implementing the developed device, the problem of import substitution was solved.


Author(s):  
V.G. Baryshevsky ◽  
K.G. Batrakov ◽  
N.A. Belous ◽  
A.A. Gurinovich ◽  
A.S. Lobko ◽  
...  

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Jiangnan Xiao ◽  
Chuang Zhao ◽  
Xingxing Feng ◽  
Xu Dong ◽  
Jiangli Zuo ◽  
...  

With the development trend of wireless and broadband in the communication link and even the whole information industry, the demand of high-frequency microwave bandwidth has been increasing. The RoF network system solves the problem of spectrum congestion in low-frequency band by providing an effective technology for the distribution of high-frequency microwave signals over optical fiber links. However, the traditional mm-wave generation technique is limited by the bandwidth of electronic devices. It is difficult to generate high-frequency and low-phase noise mm-wave signals with pure electrical components. The mm-wave communication technology based on photon assisted can overcome the bandwidth bottleneck of electronic devices and provide the potential for developing the low-cost infrastructure demand of broadband mobile services. This paper will briefly explain the characteristics of the RoF network system and the advantages of high-frequency mm-wave. Then we, respectively, introduce the modulation schemes of RoF mm-wave generation based on photon assisted including directly modulated laser (DML), external modulation, and optical heterodyne. The review mainly focuses on a variety of different mm-wave generation technologies including multifrequency vector mm-wave. Furthermore, we list several approaches to realize the large capacity data transmission techniques and describe the digital signal processing (DSP) algorithm flow in the receiver. In the end, we summarize the RoF network system and look forward to the future.


Sign in / Sign up

Export Citation Format

Share Document