scholarly journals A 219-µW ultra-low power low-noise amplifier for IEEE 802.15.4 based battery powered, portable, wearable IoT applications

2021 ◽  
Vol 3 (4) ◽  
Author(s):  
S. Chrisben Gladson ◽  
Adith Hari Narayana ◽  
V. Thenmozhi ◽  
M. Bhaskar
Keyword(s):  
Low Power ◽  
Ieee 802.15.4 ◽  
Low Voltage ◽  
Low Noise ◽  
Low Noise Amplifier ◽  
Cmos Process ◽  
Process Technology ◽  
Ultra Low Power ◽  
Power Mode ◽  
Noise Amplifier

AbstractDue to the increased processing data rates, which is required in applications such as fifth-generation (5G) wireless networks, the battery power will discharge rapidly. Hence, there is a need for the design of novel circuit topologies to cater the demand of ultra-low voltage and low power operation. In this paper, a low-noise amplifier (LNA) operating at ultra-low voltage is proposed to address the demands of battery-powered communication devices. The LNA dual shunt peaking and has two modes of operation. In low-power mode (Mode-I), the LNA achieves a high gain ($$S21$$ S 21 ) of 18.87 dB, minimum noise figure ($${NF}_{min.}$$ NF m i n . ) of 2.5 dB in the − 3 dB frequency range of 2.3–2.9 GHz, and third-order intercept point (IIP3) of − 7.9dBm when operating at 0.6 V supply. In high-power mode (Mode-II), the achieved gain, NF, and IIP3 are 21.36 dB, 2.3 dB, and 13.78dBm respectively when operating at 1 V supply. The proposed LNA is implemented in UMC 180 nm CMOS process technology with a core area of $$0.40{\mathrm{ mm}}^{2}$$ 0.40 mm 2 and the post-layout validation is performed using Cadence SpectreRF circuit simulator.

43.1 : A Novel Multi-level Memory in Pixel Technology for Ultra Low Power LTPS TFT-LCD

2010 ◽  
Vol 41 (1) ◽  
pp. 615 ◽  
Author(s):  
Naoki Ueda ◽  
Yasuyuki Ogawa ◽  
Kohei Tanaka ◽  
Yoshimitsu Yamauchi ◽  
Keiichi Yamamoto
Keyword(s):  
Low Power ◽  
Ultra Low Power ◽  
Multi Level

scholarly journals An Ultra-Low-Power Embedded Processor with Variable Micro-Architecture

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 292
Author(s):  
Wenheng Ma ◽  
Qiao Cheng ◽  
Yudi Gao ◽  
Lan Xu ◽  
Ningmei Yu
Keyword(s):  
Energy Efficiency ◽  
Low Power ◽  
Normal Mode ◽  
High Performance ◽  
Mode Switching ◽  
Peak Performance ◽  
Embedded Processors ◽  
Ultra Low Power ◽  
Branch Predictor ◽  
Power Mode

Embedded processors are widely used in various systems working on different tasks with different workloads. A more complex micro-architecture leads to better peak performance and worse power consumption. Shutting down the units designed for performance enhancement could improve energy efficiency in low-workload scenarios. In this paper, we evaluated the energy distribution in various embedded processors. According to the analysis, pipeline registers and the dynamic branch predictor, which are employed for better peak performance, have great impacts on energy efficiency. Thus, we proposed an ultra-low-power processor with variable micro-architecture. The processor is based on a 4-stage pipeline core with a Gshare branch predictor, and all units work in high-performance mode. In normal mode, the Gshare predictor is shut down and Always-Not-Taken prediction is used. In low-power mode, some of the pipeline registers are bypassed to avoid unnecessary energy dissipation and improve executing efficiency. A mode register (MR) is designed to indicate current working mode. Switching between different modes is controlled by the software. The proposed core is implemented in 40 nm technology and simulated with the traces of 17 benchmarks in Embench. The average amounts of power consumed by the respective modes are 41.7 μW, 59.7 μW and 71.1 μW. The results show that normal mode (N-mode) and low-power mode (L-mode) consume 16.08% and 41.37% less power than high-performance mode (H-mode) on average. In best case scenarios, they could save 25.36% and 49.30% more power than H-mode. Considering the execution efficiency evaluated by instructions per cycle (IPC), the proposed processor consumes 7.78% or 51.57% less energy for each instruction than the baseline core. The area of the proposed processor is only 7.19% larger than the baseline core, and only 3.08% more power is consumed in H-mode.

An Ultra-low Power Consumption MAC Protocol Complied with IEEE 802.15.4/4e for Wireless Smart Utility Networks

2016 ◽  
Vol 136 (11) ◽  
pp. 1555-1566 ◽  
Author(s):  
Jun Fujiwara ◽  
Hiroshi Harada ◽  
Takuya Kawata ◽  
Kentaro Sakamoto ◽  
Sota Tsuchiya ◽  
...  
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Ieee 802.15.4 ◽  
Mac Protocol ◽  
Low Power Consumption ◽  
Ultra Low Power

An Ultra Low Power and Variation Tolerant GEN2 RFID Tag Front-End with Novel Clock-Free Decoder

2010 ◽  
Vol E93-C (6) ◽  
pp. 785-795
Author(s):  
Sung-Jin KIM ◽  
Minchang CHO ◽  
SeongHwan CHO
Keyword(s):  
Low Power ◽  
Ultra Low Power ◽  
Rfid Tag ◽  
Front End
Sign in / Sign up

Export Citation Format

Share Document