The information gathering module of the webcom-G operating system

2004 ◽  
Author(s):  
J.P. Morrison ◽  
B. Clayton ◽  
A. Patil ◽  
S. John
Keyword(s):  
Operating System ◽  
Information Gathering

Modern TEM systems architecture

1986 ◽  
Vol 44 ◽  
pp. 602-605
Author(s):  
U. Gross ◽  
P. Hagemann
Keyword(s):  
Electron Microscope ◽  
Information Gathering ◽  
Systems Architecture ◽  
Control Functions ◽  
Transmission Electron ◽  
New Information ◽  
Comprehensive Information ◽  
Scanning Transmission ◽  
Diffraction Patterns ◽  
Analytical Equipment

By addition of analytical equipment, scanning transmission accessories and data processing equipment the basic transmission electron microscope (TEM) has evolved into a comprehensive information gathering system. This extension has led to increased complexity of the instrument as compared with the straightforward imaging microscope, since in general new information capacity has required the addition of new control hardware. The increased operational complexity is reflected in a proliferation of knobs and buttons.In the conventional electron microscope design the operating panel of the instrument has distinct control elements to alter optical conditions of the microscope column in different modes. As a consequence a multiplicity of control functions has been inevitable. Examples of this are the three pairs of focus and magnification controls needed for TEM imaging, diffraction patterns, and STEM images.

Routine Digital Processing of Microscope Images

1990 ◽  
Vol 48 (1) ◽  
pp. 550-551
Author(s):  
E. Wisse ◽  
A. Geerts ◽  
R.B. De Zanger
Keyword(s):  
Operating System ◽  
Digital Processing ◽  
Hard Disks ◽  
The Sun ◽  
Tape Drive ◽  
High Definition ◽  
Fluorescent Microscope ◽  
Microscope Images ◽  
Helical Scan ◽  
Ethernet Connection

The slowscan and TV signal of the Philips SEM 505 and the signal of a TV camera attached to a Leitz fluorescent microscope, were digitized by the data acquisition processor of a Masscomp 5520S computer, which is based on a 16.7 MHz 68020 CPU with 10 Mb RAM memory, a graphics processor with two frame buffers for images with 8 bit / 256 grey values, a high definition (HD) monitor (910 × 1150), two hard disks (70 and 663 Mb) and a 60 Mb tape drive. The system is equipped with Imaging Technology video digitizing boards: analog I/O, an ALU, and two memory mapped frame buffers for TV images of the IP 512 series. The Masscomp computer has an ethernet connection to other computers, such as a Vax PDP 11/785, and a Sun 368i with a 327 Mb hard disk and a SCSI interface to an Exabyte 2.3 Gb helical scan tape drive. The operating system for these computers is based on different versions of Unix, such as RTU 4.1 (including NFS) on the acquisition computer, bsd 4.3 for the Vax, and Sun OS 4.0.1 for the Sun (with NFS).

PERBAIKAN TATA LETAK LANTAI PRODUKSI INDUSTRI MEBEL MENGGUNAKAN METODE GRAFIK DAN ALGORITMA CRAFT

2020 ◽  
Vol 6 (1) ◽  
pp. 1
Author(s):  
Kuswanto Kuswanto ◽  
Juan Junius ◽  
Anita Christine Sembiring
Keyword(s):  
Operating System ◽  
Material Handling ◽  
Facility Layout ◽  
Integrated Planning ◽  
Furniture Manufacturing ◽  
Milling Machines ◽  
Material Handling Costs ◽  
The Cost ◽  
A Company ◽  
Research Show

Facility layout is integrated planning of the flow of a product in an operating system to obtain the most effective and efficient interrelation between workers, materials, machinery, and equipment as well as handling and transferring materials. A company engaged in furniture manufacturing has a problem in its production process, namely, the distance between machines is too far so that it affects the cost of handling materials. Distant workstations are found on profile machines, milling machines, measuring machines, cutting machines. Therefore, improvements must be made to the layout of facilities on the production floor so that facility layout is efficient and material handling costs are reduced. The problem-solving approach used is the Graph Method and CRAFT Algorithm. The results of the research show that material handling costs are reduced by 7.58% or Rp. 17,765 using the CRAFT algorithm.

Pengembangan Sistem VOIP Menggunakan Server Issabel Versi 4.0 dan Tunnel EOIP pada OMNI Hospital Alam Sutera

2018 ◽  
Vol 18 (1) ◽  
pp. 13-20
Author(s):  
Elly Mufida ◽  
David Wardana Agus Rahayu
Keyword(s):  
Operating System ◽  
Open Source ◽  
End Of Life ◽  
Communication System ◽  
Communication Protocol ◽  
The Internet ◽  
Migration Process ◽  
Web Browser ◽  
Backup Path ◽  
E Mail

The VoIP communication system at OMNI Hospital Alam Sutera uses the Elastix 2.5 server with the Centos 5.11 operating system. Elastix 2.5 by the developer has been declared End of Life. The server security system is a serious concern considering that VoIP servers can be accessed from the internet. Iptables and fail2ban applications are applications that are used to limit and counteract those who try to attack the VoIP server. One application that can be used as an open source VoIP server is the Issabel Application version 4.0. The migration process from Elastix 2.5 application to Issabel 4.0 by backing up all configurations in the Elastix 2.5 application through a web browser including the configuration of endpoints, fax, e-mail, asterisk. After the backup file is downloaded then upload the backup file to the Issabel 4.0 application then run the migration process. Adding a backup path as a failover connection is needed because the VoIP communication protocol between the OMNI Hospitals Group still uses one path so that when there is a problem in the connection path, the communication protocol will stop. The tunnel EoIP is a protocol used as a backup path between the OMNI Hospitals Group site.

Sign in / Sign up

Export Citation Format

Share Document