Precision time transfer using IEEE 1588 over OTN through a commercial optical telecommunications network

2016 ◽  
Author(s):  
Marc Weiss ◽  
Lee Cosart ◽  
James Hanssen ◽  
Jian Yao
Keyword(s):  
Time Transfer ◽  
Ieee 1588 ◽  
Optical Telecommunications ◽  
Telecommunications Network ◽  
Precision Time

Ethernet Time Transfer through a U.S. Commercial Optical Telecommunications Network

2014 ◽  
Author(s):  
M. Weiss ◽  
Lee Cosart ◽  
James Hanssen ◽  
S. Hicks ◽  
C. Chase ◽  
...  
Keyword(s):  
Time Transfer ◽  
Optical Telecommunications ◽  
Telecommunications Network

The Design of an IEEE 1588 End-to-End Transparent Ethernet Switch

2021 ◽  
Author(s):  
◽  
Caleb Gordon
Keyword(s):  
Packet Delay ◽  
Time Interval ◽  
Path Delay ◽  
Negative Effects ◽  
Ieee 1588 ◽  
Precision Time ◽  
End To End ◽  
And Control ◽  
Measurement And Control ◽  
Ethernet Switch

<p>In measurement and control systems there is often a need to synchronise distributed clocks. Traditionally, synchronisation has been achieved using a dedicated medium to convey time information, typically using the IRIG-B serial protocol. The precision time protocol (IEEE 1588) has been designed as an improvement to current methods of synchronisation within a distributed network of devices. IEEE 1588 is a message based protocol that can be implemented across packet based networks including, but not limited to, Ethernet. Standard Ethernet switches introduce a variable delay to packets that inhibits path delay measurements. Transparent switches have been introduced to measure and adjust for packet delay, thus removing the negative effects that these variations cause.  This thesis describes the hardware and firmware design of an IEEE 1588 transparent end-to-end Ethernet switch for Tekron International Ltd based in Lower Hutt, New Zealand. This switch has the ability to monitor all Ethernet traffic, identify IEEE 1588 timing packets, measure the delay that these packets experience while passing through the switch, and account for this delay by adjusting a time-interval field of the packet as it is leaving the switch. This process takes place at the operational speed of the port, and without introducing significant delay. Time-interval measurements can be made using a high-precision timestamp unit with a resolution of 1 ns. The total jitter introduced by this measurement process is just 4.5 ns through a single switch.</p>

Sign in / Sign up

Export Citation Format

Share Document