Optimal Reactive Power Planning of Radial Distribution Systems with Distributed Generation

2013 ◽  
Author(s):  
Li Shengqi ◽  
Zeng Lilin ◽  
Li Yongan ◽  
He Zhengping
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution Systems ◽  
Reactive Power ◽  
Reactive Power Planning

scholarly journals Distributed Generation Placement in Radial Distribution Networks using a Bat-inspired Algorithm

DYNA ◽  
2015 ◽  
Vol 82 (192) ◽  
pp. 60-67 ◽  
Author(s):  
John Edwin Candelo-Becerra ◽  
Helman Hernández-Riaño
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution Systems ◽  
Reactive Power ◽  
Distribution Networks ◽  
Power Losses ◽  
Number Of Generators ◽  
Metaheuristic Techniques ◽  
Distributed Generation Placement ◽  
Made In

<p>Distributed generation (DG) is an important issue for distribution networks due to the improvement in power losses, but the location and size of generators could be a difficult task for exact techniques. The metaheuristic techniques have become a better option to determine good solutions and in this paper the application of a bat-inspired algorithm (BA) to a problem of location and size of distributed generation in radial distribution systems is presented. A comparison between particle swarm optimization (PSO) and BA was made in the 33-node and 69-node test feeders, using as scenarios the change in active and reactive power, and the number of generators. PSO and BA found good results for small number and capacities of generators, but BA obtained better results for difficult problems and converged faster for all scenarios. The maximum active power injections to reduce power losses in the distribution networks were found for the five scenarios.</p>

Multi-objective optimization of optimal capacitor allocation in radial distribution systems

2020 ◽  
Vol 21 (3) ◽  
Author(s):  
Sayed Mir Shah Danish ◽  
Mikaeel Ahmadi ◽  
Atsushi Yona ◽  
Tomonobu Senjyu ◽  
Narayanan Krishna ◽  
...  
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Reactive Power ◽  
Stability Index ◽  
Distribution Networks ◽  
Optimization Method ◽  
Optimal Size ◽  
Multi Objective Optimization ◽  
Multi Objective

AbstractThe optimal size and location of the compensator in the distribution system play a significant role in minimizing the energy loss and the cost of reactive power compensation. This article introduces an efficient heuristic-based approach to assign static shunt capacitors along radial distribution networks using multi-objective optimization method. A new objective function different from literature is adapted to enhance the overall system voltage stability index, minimize power loss, and to achieve maximum net yearly savings. However, the capacitor sizes are assumed as discrete known variables, which are to be placed on the buses such that it reduces the losses of the distribution system to a minimum. Load sensitive factor (LSF) has been used to predict the most effective buses as the best place for installing compensator devices. IEEE 34-bus and 118-bus test distribution systems are utilized to validate and demonstrate the applicability of the proposed method. The simulation results obtained are compared with previous methods reported in the literature and found to be encouraging.

scholarly journals A Novel Multiobjective Hybrid Technique for Siting and Sizing of Distributed Generation and Capacitor Banks in Radial Distribution Systems

2021 ◽  
Vol 13 (6) ◽  
pp. 3308
Author(s):  
Chandrasekaran Venkatesan ◽  
Raju Kannadasan ◽  
Mohammed H. Alsharif ◽  
Mun-Kyeom Kim ◽  
Jamel Nebhen
Keyword(s):  
Multiobjective Optimization ◽  
Distributed Generation ◽  
Radial Distribution ◽  
Hybrid Method ◽  
Distribution Systems ◽  
Optimization Technique ◽  
Optimal Placement ◽  
Grey Wolf Optimizer ◽  
Hybrid Technique ◽  
Metaheuristic Optimization

Distributed generation (DG) and capacitor bank (CB) allocation in distribution systems (DS) has the potential to enhance the overall system performance of radial distribution systems (RDS) using a multiobjective optimization technique. The benefits of CB and DG injection in the RDS greatly depend on selecting a suitable number of CBs/DGs and their volume along with the finest location. This work proposes applying a hybrid enhanced grey wolf optimizer and particle swarm optimization (EGWO-PSO) algorithm for optimal placement and sizing of DGs and CBs. EGWO is a metaheuristic optimization technique stimulated by grey wolves. On the other hand, PSO is a swarm-based metaheuristic optimization algorithm that finds the optimal solution to a problem through the movement of the particles. The advantages of both techniques are utilized to acquire mutual benefits, i.e., the exploration ability of the EGWO and the exploitation ability of the PSO. The proposed hybrid method has a high convergence speed and is not trapped in local optimal. Using this hybrid method, technical, economic, and environmental advantages are enhanced using multiobjective functions (MOF) such as minimizing active power losses, voltage deviation index (VDI), the total cost of electrical energy, and total emissions from generation sources and enhancing the voltage stability index (VSI). Six different operational cases are considered and carried out on two standard distribution systems, namely, IEEE 33- and 69-bus RDSs, to demonstrate the proposed scheme’s effectiveness extensively. The simulated results are compared with existing optimization algorithms. From the obtained results, it is observed that the proposed EGWO-PSO gives distinguished enhancements in multiobjective optimization of different conflicting objective functions and high-level performance with global optimal values.

Optimization of Real Power Loss and Voltage Stability Index for Distribution Systems with Distributed Generation

2017 ◽  
Vol 33 ◽  
pp. 100-114 ◽  
Author(s):  
Mostafa Elshahed ◽  
Mahmoud Dawod ◽  
Zeinab H. Osman
Keyword(s):  
Genetic Algorithm ◽  
Distributed Generation ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Reactive Power ◽  
Optimization Problems ◽  
Stability Index ◽  
Mixed Integer ◽  
Voltage Profile ◽  
Voltage Stability Index

Integrating Distributed Generation (DG) units into distribution systems can have an impact on the voltage profile, power flow, power losses, and voltage stability. In this paper, a new methodology for DG location and sizing are developed to minimize system losses and maximize voltage stability index (VSI). A proper allocation of DG has to be determined using the fuzzy ranking method to verify best compromised solutions and achieve maximum benefits. Synchronous machines are utilized and its power factor is optimally determined via genetic optimization to inject reactive power to decrease system losses and improve voltage profile and VSI. The Augmented Lagrangian Genetic Algorithm with nonlinear mixed-integer variables and Non-dominated Sorting Genetic Algorithm have been implemented to solve both single/multi-objective function optimization problems. For proposed methodology effectiveness verification, it is tested on 33-bus and 69-bus radial distribution systems then compared with previous works.

scholarly journals Simultaneous Placement and Sizing of Distributed Generation Units and Shunt Capacitors on Radial Distribution Systems Using Cuckoo Search Algorithm

2021 ◽  
pp. 43-58
Author(s):  
Sunday Adeleke Salimon ◽  
Gafari Abiola Adepoju ◽  
Isaiah Gbadegesin Adebayo ◽  
Oluwadamilare Bode Adewuyi ◽  
Saheed Oluwasina Amuda
Keyword(s):  
Radial Distribution ◽  
Distribution Systems ◽  
Reactive Power ◽  
Search Algorithm ◽  
Stability Index ◽  
Cuckoo Search ◽  
Optimal Placement ◽  
Power Loss Reduction ◽  
Operational Test ◽  
Shunt Capacitors

This paper presents a Cuckoo Search (CS) algorithm-based methodology for simultaneous optimal placement and sizing of Shunt Capacitors (SCs) and Distributed Generations (DGs) together in radial distribution systems. The objectives of the work are to minimize the real power and reactive power losses while maximizing the voltage stability index of the distribution network subjected to equality and inequality constraints. Different operational test cases are considered namely installation of SCs only, DGs only, SCs before DGs, DGs before SCs, and SCs and DGs at one time. The proposed method has been demonstrated on standard IEEE 33-bus and a practical Ayepe 34-bus radial distribution test systems. The highest percentage power loss reduction of 94.4% and other substantial benefits are obtained when SCs and DGs are optimally installed simultaneously. Simulated results obtained from the proposed technique are compared with other well-known optimization algorithms and found to be more effective.

Sign in / Sign up

Export Citation Format

Share Document