PMV-Based Genetic Algorithms for Indoor Temperature Control System

Author(s):  
Yi-Ying Chang ◽  
Yi-Ping Lin
2019 ◽  
Vol 136 ◽  
pp. 02033
Author(s):  
Li Gao ◽  
Runmei Zhang ◽  
Guangbin Zhang

The ideal energy-saving building should meet the environmental quality of living space in different seasons with the least energy consumption. The indoor temperature of the building is an important consideration. However, most temperature control systems have certain problems. In order to improve the stability and accuracy of the temperature control system, a system based on FPGA+Verilog HDL for intelligent adjustment of indoor temperature is designed. The purpose of the system design is to achieve the dual effect of comfortable and energy-saving living environment. The system uses an integrated temperature sensor DS18B20 as a temperature sensing element. FPGA as the master control center to process data. The system is programmed with the hardware description language Verilog HDL. The temperature control system uses a digital PID control algorithm. The simulation results verify the correctness of the design.


2013 ◽  
Vol 650 ◽  
pp. 559-564 ◽  
Author(s):  
Jun Peng Xu ◽  
Xiao Qin Ma ◽  
Hong Shen

In allusion to the traditional temperature control method for domestic wall-mounted gas boiler, this paper designed a temperature control system with a wireless temperature sensing circuit to transmit the real-time indoor temperature to the controller, effectively solved the problem that the detection temperature is always lower than the indoor temperature, and guaranteed the temperature control effect of the wall-mounted gas boiler. Furthermore this temperature control system can set the temperature at home, while users can remotely start and stop the heating of the gas boiler by mobile phone.


2017 ◽  
Vol 3 (2) ◽  
pp. 88
Author(s):  
Suci Rahmatia ◽  
Marsah Zaysi Makhudzia

<p><em>Abstrak <strong>- </strong></em><strong>Transformator adalah peralatan listrik yang sangat vital dalam proses pembangkitan maupun transmisi energi listrik karena transformator dapat menaikkan atau menurunkan tegangan. Pada proses menaikkan dan menurunkan tegangan biasanya sering timbul panas akibat rugi – rugi tembaga pada inti besi dan kumparannya sehingga pada kondisi overload akan menimbulkan pemanasan yang berlebih dan dapat mempengaruhi kinerja transformator. Oleh karena itu dibuat sistem kontrol temperatur pada transformer yang dapat mengontrol temperatur di dalam transformator saat bekerja pada kondisi overload, sehigga transformatornya tidak terbakar. Dial thermometer digunakan sebagai alat yang mengontrol temperatur transformator pada sistem kontrol temperatur. Agar mendapatkan sistem kontrol yang optimal, maka setting temperatur pada dial thermometer di sesuaikan dengan temperatur maksimal tranformator dapat bekerja. Sehingga pada saat temperatur tertentu dial thermometer dapat memberikan sinyal untuk membunyikan alarm dan mengaktifkan kontrol kipas sehingga kipas dapat bekerja menurunkan temperatur transformator.<em></em></strong></p><p><strong><em> </em></strong></p><p><strong><em>Kata kunci - </em></strong><em>transformator, rugi – rugi tembaga, temperatur, sistem kontrol, dial thermometer<strong>.</strong></em></p><p><strong><em> </em></strong></p><p><em>Abstract <strong>- </strong></em><strong>A transformer is an electrical device that is vital in the generation and transmission of electrical energy because the transformer can raise (stepping up) or lower (stepping down) the voltage. In the process of raising and lowering the voltage is usually often caused heat loss of copper in iron core and coil so that the overload condition will cause excessive warming and can affect the performance of the transformer. Therefore, a temperature control system on the transformer can control the temperature inside the transformer while working under overload conditions, so the transformer is not burned. Dial thermometer is used as a device that controls the temperature of the transformer in the temperature control system. In order to obtain an optimal control system, the temperature setting on the dial thermometer adjusted to the maximum transformer temperature can work. So that when a certain temperature dial thermometer can provide a signal to sound the alarm and activate the fan control so that the fan can work down the transformer temperature.</strong></p><p><strong> </strong></p><p><strong><em>Keywords -  </em></strong><em>transformator, loss of copper, themperature, control system, dial thermometer<strong></strong></em></p>


Sign in / Sign up

Export Citation Format

Share Document