Design of a PWM multiple switch control and high efficiency current mode DC to DC boost converter for portable devices

2014 ◽  
Author(s):  
Meng-Hsueh Wu ◽  
Jia-Chuan Lin ◽  
Yu-Chi Tsui ◽  
Pei-Han Kuan
Keyword(s):  
High Efficiency ◽  
Current Mode ◽  
Boost Converter ◽  
Portable Devices ◽  
Switch Control

Selectable Output Voltage High Efficiency Boost Converter

2018 ◽  
Vol 27 (11) ◽  
pp. 1850178 ◽  
Author(s):  
Li-Ye Cheng ◽  
Chen Sun ◽  
Zhen-Wei Zhou
Keyword(s):  
High Efficiency ◽  
Input Voltage ◽  
Boost Converter ◽  
Oxide Semiconductor ◽  
Constant Current ◽  
Portable Devices ◽  
Cmos Process ◽  
Transient Time ◽  
Heavy Load ◽  
Light Load

The paper proposed a high efficiency boost converter with constant voltage (CV) and constant current (CC) modes. The selection of CV or CC working mode is based on the requirement, and the transient time from CV to CC mode is 230[Formula: see text][Formula: see text]s. The boost converter is particularly for the use of Li-ion battery portable devices. High efficiency is obtained by sleep/burst mode under light load and pulse width modulation (PWM) mode under heavy load. The quiescent current of the whole chip can be down to 6[Formula: see text][Formula: see text]A when the converter enters the standby mode. The converter has been made of 0.35[Formula: see text][Formula: see text]m complementary metal-oxide semiconductor (CMOS) process. Experimental results show that the peak efficiency is 98.2% at a 1.5[Formula: see text]A output current and a 4.2[Formula: see text]V input voltage.

scholarly journals High gain boost converter with modified voltage multiplier for stand alone PV system

2019 ◽  
Vol 14 (1) ◽  
pp. 185
Author(s):  
Getzial Anbu Mani ◽  
A. K. Parvathy
Keyword(s):  
High Efficiency ◽  
Input Voltage ◽  
High Gain ◽  
Boost Converter ◽  
Pv System ◽  
Boost Converters ◽  
Low Input ◽  
Voltage Multiplier ◽  
Photo Voltaic ◽  
Current Ripple

<p>Boost converters of high gain are used for photo voltaic systems to obtain high efficiency. These high gain Boost converters gives increased output voltage for a low input produces high outputs for low input voltage. The High gain boost converters have the following merits. Conduction losses input current ripple and stress across the switches is reduced while the efficiency is increases. The high gain of the converters with the above said merits is obtained by changing the duty cycle of switches accordingly .In this paper a boost converter working with interleaved concept along with a additional Nstage voltage Multiplier has been carried out by simulation using MATLAB/ simulink and the mathematical modeling of various parameters is also done.</p>

scholarly journals High Efficiency Buck-Boost Converter with Three Modes Selection for HV Applications using 0.18 μm Technology

2020 ◽  
Vol 18 (2) ◽  
pp. 137-144
Author(s):  
Fouad Farah ◽  
Mustapha El Alaoui ◽  
Abdelali El Boutahiri ◽  
Mounir Ouremchi ◽  
Karim El Khadiri ◽  
...  
Keyword(s):  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Output Voltage ◽  
High Efficiency ◽  
Power Conversion ◽  
Boost Converter ◽  
Current Control ◽  
Voltage Range ◽  
Operating Modes ◽  
Soft Start

In this paper, we aim to make a detailed study on the evaluation and the characteristics of the non-inverting buck–boost converter. In order to improve the behaviour of the buck-boost converter for the three operating modes, we propose an architecture based on peak current-control. Using a three modes selection circuit and a soft start circuit, this converter is able to expand the power conversion efficiency and reduce inrush current at the feedback loop. The proposed converter is designed to operate with a variable output voltage. In addition, we use LDMOS transistors with low on-resistance, which are adequate for HV applications. The obtained results show that the proposed buck-boost converter perform perfectly compared to others architecture and it is successfully implemented using 0.18 μm CMOS TSMC technology, with an output voltage regulated to 12V and input voltage range of 4-20 V. The power conversion efficiency for the three operating modes buck, boost and buck-boost are 97.6%, 96.3% and 95.5% respectively at load current of 4A.

Sign in / Sign up

Export Citation Format

Share Document