scholarly journals Measuring Hydrometeors Using a Precipitation Microphysical Characteristics Sensor: Sampling Effect of Different Bin Sizes on Drop Size Distribution Parameters

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Xichuan Liu ◽  
Taichang Gao ◽  
Yuntao Hu ◽  
Xiaojian Shu
Keyword(s):  
Drop Size ◽  
Rain Rate ◽  
Monte Carlo Model ◽  
Rain Gauge ◽  
Sampling Schemes ◽  
Distribution Parameters ◽  
Optimum Sampling ◽  
Simulation Results ◽  
The Impact ◽  
Good Agreement

In order to improve the measurement of precipitation microphysical characteristics sensor (PMCS), the sampling process of raindrops by PMCS based on a particle-by-particle Monte-Carlo model was simulated to discuss the effect of different bin sizes on DSD measurement, and the optimum sampling bin sizes for PMCS were proposed based on the simulation results. The simulation results of five sampling schemes of bin sizes in four rain-rate categories show that the raw capture DSD has a significant fluctuation variation influenced by the capture probability, whereas the appropriate sampling bin size and width can reduce the impact of variation of raindrop number on DSD shape. A field measurement of a PMCS, an OTT PARSIVEL disdrometer, and a tipping bucket rain Gauge shows that the rain-rate and rainfall accumulations have good consistencies between PMCS, OTT, and Gauge; the DSD obtained by PMCS and OTT has a good agreement; the probability of N0, μ, and Λ shows that there is a good agreement between the Gamma parameters of PMCS and OTT; the fitted μ-Λ and Z-R relationship measured by PMCS is close to that measured by OTT, which validates the performance of PMCS on rain-rate, rainfall accumulation, and DSD related parameters.

scholarly journals Estimating Rain Rates from Tipping-Bucket Rain Gauge Measurements

2008 ◽  
Vol 25 (1) ◽  
pp. 43-56 ◽  
Author(s):  
Jianxin Wang ◽  
Brad L. Fisher ◽  
David B. Wolff
Keyword(s):  
Rain Rate ◽  
Tropical Rainfall Measuring Mission ◽  
Rain Gauge ◽  
Radar Reflectivity ◽  
Time Shift ◽  
Estimation Errors ◽  
Rate Estimation ◽  
Reflectivity Data ◽  
Rain Rates ◽  
Event Definition

Abstract This paper describes the cubic spline–based operational system for the generation of the Tropical Rainfall Measuring Mission (TRMM) 1-min rain-rate product 2A-56 from tipping-bucket (TB) gauge measurements. A simulated TB gauge from a Joss–Waldvogel disdrometer is employed to evaluate the errors of the TB rain-rate estimation. These errors are very sensitive to the time scale of rain rates. One-minute rain rates suffer substantial errors, especially at low rain rates. When 1-min rain rates are averaged over 4–7-min intervals or longer, the errors dramatically reduce. Estimated lower rain rates are sensitive to the event definition whereas the higher rates are not. The median relative absolute errors are about 22% and 32% for 1-min rain rates higher and lower than 3 mm h−1, respectively. These errors decrease to 5% and 14% when rain rates are used at the 7-min scale. The radar reflectivity–rain-rate distributions drawn from the large amount of 7-min rain rates and radar reflectivity data are mostly insensitive to the event definition. The time shift due to inaccurate clocks can also cause rain-rate estimation errors, which increase with the shifted time length. Finally, some recommendations are proposed for possible improvements of rainfall measurements and rain-rate estimations.

scholarly journals Evaluation of rainfall retrievals from SEVIRI reflectances over West Africa using TRMM-PR and CMORPH

2011 ◽  
Vol 15 (2) ◽  
pp. 437-451 ◽  
Author(s):  
E. L. A. Wolters ◽  
B. J. J. M. van den Hurk ◽  
R. A. Roebeling
Keyword(s):  
West Africa ◽  
Temporal Resolution ◽  
Rain Rate ◽  
Thermal Infrared ◽  
Occurrence Frequency ◽  
Added Value ◽  
Inter Tropical Convergence Zone ◽  
Trmm Pr ◽  
Spatio Temporal ◽  
Good Agreement

Abstract. This paper describes the evaluation of the KNMI Cloud Physical Properties – Precipitation Properties (CPP-PP) algorithm over West Africa. The algorithm combines condensed water path (CWP), cloud phase (CPH), cloud particle effective radius (re), and cloud-top temperature (CTT) retrievals from visible, near-infrared and thermal infrared observations of the Spinning Enhanced Visible and Infrared Imager (SEVIRI) onboard the Meteosat Second Generation (MSG) satellites to estimate rain occurrence frequency and rain rate. For the 2005 and 2006 monsoon seasons, it is investigated whether the CPP-PP algorithm is capable of retrieving rain occurrence frequency and rain rate over West Africa with sufficient accuracy, using Tropical Monsoon Measurement Mission Precipitation Radar (TRMM-PR) as reference. As a second goal, it is assessed whether SEVIRI is capable of monitoring the seasonal and daytime evolution of rainfall during the West African monsoon (WAM), using Climate Prediction Center Morphing Technique (CMORPH) rainfall observations. The SEVIRI-detected rainfall area agrees well with TRMM-PR, with the areal extent of rainfall by SEVIRI being ~10% larger than from TRMM-PR. The mean retrieved rain rate from CPP-PP is about 8% higher than from TRMM-PR. Examination of the TRMM-PR and CPP-PP cumulative frequency distributions revealed that differences between CPP-PP and TRMM-PR are generally within +/−10%. Relative to the AMMA rain gauge observations, CPP-PP shows very good agreement up to 5 mm h−1. However, at higher rain rates (5–16 mm h−1) CPP-PP overestimates compared to the rain gauges. With respect to the second goal of this paper, it was shown that both the accumulated precipitation and the seasonal progression of rainfall throughout the WAM is in good agreement with CMORPH, although CPP-PP retrieves higher amounts in the coastal region of West Africa. Using latitudinal Hovmüller diagrams, a fair correspondence between CPP-PP and CMORPH was found, which is reflected by high correlation coefficients (~0.7) for both rain rate and rain occurrence frequency. The daytime cycle of rainfall from CPP-PP shows distinctly different patterns for three different regions in West Africa throughout the WAM, with a decrease in dynamical range of rainfall near the Inter Tropical Convergence Zone (ITCZ). The dynamical range as retrieved from CPP-PP is larger than that from CMORPH. It is suggested that this results from both the better spatio-temporal resolution of SEVIRI, as well as from thermal infrared radiances being partly used by CMORPH, which likely smoothes the daytime precipitation signal, especially in case of cold anvils from convective systems. The promising results show that the CPP-PP algorithm, taking advantage of the high spatio-temporal resolution of SEVIRI, is of added value for monitoring daytime precipitation patterns in tropical areas.

scholarly journals Automated rain rate estimates using the Ka-band ARM zenith radar (KAZR)

2015 ◽  
Vol 8 (9) ◽  
pp. 3685-3699 ◽  
Author(s):  
A. Chandra ◽  
C. Zhang ◽  
P. Kollias ◽  
S. Matrosov ◽  
W. Szyrmer
Keyword(s):  
Rain Rate ◽  
Tropical Indian Ocean ◽  
Rain Gauge ◽  
Signal Attenuation ◽  
Ka Band ◽  
Automated Algorithm ◽  
Atmospheric Radiation Measurement ◽  
Microphysical Processes ◽  
The Tropics ◽  
Rain Rates

Abstract. The use of millimeter wavelength radars for probing precipitation has recently gained interest. However, estimation of precipitation variables is not straightforward due to strong signal attenuation, radar receiver saturation, antenna wet radome effects and natural microphysical variability. Here, an automated algorithm is developed for routinely retrieving rain rates from the profiling Ka-band (35-GHz) ARM (Atmospheric Radiation Measurement) zenith radars (KAZR). A 1-dimensional, simple, steady state microphysical model is used to estimate impacts of microphysical processes and attenuation on the profiles of radar observables at 35-GHz and thus provide criteria for identifying situations when attenuation or microphysical processes dominate KAZR observations. KAZR observations are also screened for signal saturation and wet radome effects. The algorithm is implemented in two steps: high rain rates are retrieved by using the amount of attenuation in rain layers, while low rain rates are retrieved from the reflectivity–rain rate (Ze–R) relation. Observations collected by the KAZR, rain gauge, disdrometer and scanning precipitating radars during the DYNAMO/AMIE field campaign at the Gan Island of the tropical Indian Ocean are used to validate the proposed approach. The differences in the rain accumulation from the proposed algorithm are quantified. The results indicate that the proposed algorithm has a potential for deriving continuous rain rate statistics in the tropics.

scholarly journals Improving Satellite-Based Subhourly Surface Rain Estimates Using Vertical Rain Profile Information

2019 ◽  
Vol 20 (5) ◽  
pp. 1015-1026 ◽  
Author(s):  
Nobuyuki Utsumi ◽  
Hyungjun Kim ◽  
F. Joseph Turk ◽  
Ziad. S. Haddad
Keyword(s):  
Rain Rate ◽  
Tropical Rainfall Measuring Mission ◽  
Rain Gauge ◽  
Rain Gauge Data ◽  
Rain Gauges ◽  
Gauge Data ◽  
Surface Rain Rate ◽  
Trmm Precipitation ◽  
Time Lagged ◽  
Rain Rates

Abstract Quantifying time-averaged rain rate, or rain accumulation, on subhourly time scales is essential for various application studies requiring rain estimates. This study proposes a novel idea to estimate subhourly time-averaged surface rain rate based on the instantaneous vertical rain profile observed from low-Earth-orbiting satellites. Instantaneous rain estimates from the Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) are compared with 1-min surface rain gauges in North America and Kwajalein atoll for the warm seasons of 2005–14. Time-lagged correlation analysis between PR rain rates at various height levels and surface rain gauge data shows that the peak of the correlations tends to be delayed for PR rain at higher levels up to around 6-km altitude. PR estimates for low to middle height levels have better correlations with time-delayed surface gauge data than the PR’s estimated surface rain rate product. This implies that rain estimates for lower to middle heights may have skill to estimate the eventual surface rain rate that occurs 1–30 min later. Therefore, in this study, the vertical profiles of TRMM PR instantaneous rain estimates are averaged between the surface and various heights above the surface to represent time-averaged surface rain rate. It was shown that vertically averaged PR estimates up to middle heights (~4.5 km) exhibit better skill, compared to the PR estimated instantaneous surface rain product, to represent subhourly (~30 min) time-averaged surface rain rate. These findings highlight the merit of additional consideration of vertical rain profiles, not only instantaneous surface rain rate, to improve subhourly surface estimates of satellite-based rain products.

Comparison of Single- and Dual-Polarization–Based Rainfall Estimates Using NEXRAD Data for the NASA Iowa Flood Studies Project

2015 ◽  
Vol 16 (4) ◽  
pp. 1658-1675 ◽  
Author(s):  
Bong-Chul Seo ◽  
Brenda Dolan ◽  
Witold F. Krajewski ◽  
Steven A. Rutledge ◽  
Walter Petersen
Keyword(s):  
Rain Rate ◽  
Heavy Rain ◽  
Rain Gauge ◽  
Superior Performance ◽  
Dual Polarization ◽  
Radar Rainfall ◽  
Colorado State University ◽  
Precipitation Estimation ◽  
Improved Performance ◽  
Rainfall Estimates

Abstract This study compares and evaluates single-polarization (SP)- and dual-polarization (DP)-based radar-rainfall (RR) estimates using NEXRAD data acquired during Iowa Flood Studies (IFloodS), a NASA GPM ground validation field campaign carried out in May–June 2013. The objective of this study is to understand the potential benefit of the DP quantitative precipitation estimation, which selects different rain-rate estimators according to radar-identified precipitation types, and to evaluate RR estimates generated by the recent research SP and DP algorithms. The Iowa Flood Center SP (IFC-SP) and Colorado State University DP (CSU-DP) products are analyzed and assessed using two high-density, high-quality rain gauge networks as ground reference. The CSU-DP algorithm shows superior performance to the IFC-SP algorithm, especially for heavy convective rains. We verify that dynamic changes in the proportion of heavy rain during the convective period are associated with the improved performance of CSU-DP rainfall estimates. For a lighter rain case, the IFC-SP and CSU-DP products are not significantly different in statistical metrics and visual agreement with the rain gauge data. This is because both algorithms use the identical NEXRAD reflectivity–rain rate (Z–R) relation that might lead to substantial underestimation for the presented case.

On the Effect of Non-Raining Parameters in Retrieval of Surface Rain Rate Using TRMM PR and TMI Measurements

2012 ◽  
Vol 5 (3) ◽  
pp. 735-743 ◽  
Author(s):  
Srinivasa Ramanujam ◽  
Chandrasekar Radhakrishnan ◽  
Deepak Subramani ◽  
Balaji Chakravarthy
Keyword(s):  
Rain Rate ◽  
Trmm Pr ◽  
Surface Rain Rate

scholarly journals A comparison of rainfall measurements from multiple instruments

2013 ◽  
Vol 6 (7) ◽  
pp. 1585-1595 ◽  
Author(s):  
X. C. Liu ◽  
T. C. Gao ◽  
L. Liu
Keyword(s):  
Rain Rate ◽  
Rain Gauge ◽  
Measurement Range ◽  
Light Rain ◽  
Large Size ◽  
Drop Size Distributions ◽  
Rain Rates ◽  
Effect Of Light ◽  
Good Agreement

Abstract. Simultaneous observations of rainfall collected by a tipping bucket rain gauge (TBRG), a weighing rain gauge (WRG), an optical rain gauge (ORG), a present weather detector (PWD), a Joss–Waldvogel disdrometer (JWD), and a 2-D video disdrometer (2DVD) during January to October 2012 were analyzed to evaluate how accurately they measure rainfall and drop size distributions (DSDs). For the long-term observations, there were different discrepancies in rain amounts from six instruments on the order of 0% to 27.7%. The TBRG, WRG, and ORG have a good agreement, while the PWD and 2DVD record higher and the JWD lower rain rates when R > 20 mm h−1, the ORG agrees well with JWD and 2DVD, while the TBRG records higher and the WRG lower rain rates when R > 20 mm h−1. Compared with the TBRG and WRG, optical and impact instruments can measure the rain rate accurately in the light rain. The overall DSDs of JWD and 2DVD agree well with each other, except for the small raindrops (D < 1 mm). JWD can measure more moderate-size raindrops (0.3 mm < D < 1.5 mm) than 2DVD, but 2DVD can measure more small-size raindrops (D < 0.3 mm). 2DVD has a larger measurement range; more overall raindrops can be measured by 2DVD than by JWD in different rain rate regimes. But small raindrops might be underestimated by 2DVD when R > 15 mm h−1. The small raindrops tend to be omitted in the more large-size raindrops due to the shadow effect of light. Therefore, the measurement accuracy of small raindrops in the heavy rainfall from 2DVD should be handled carefully.

Sign in / Sign up

Export Citation Format

Share Document