Multi-vehicle cooperative localization using indirect vehicle-to-vehicle relative pose estimation

Author(s):  
Hao Li ◽  
Fawzi Nashashibi
Sensors ◽  
2019 ◽  
Vol 19 (20) ◽  
pp. 4366 ◽  
Author(s):  
Francisco Molina Martel ◽  
Juri Sidorenko ◽  
Christoph Bodensteiner ◽  
Michael Arens ◽  
Urs Hugentobler

In this work we introduce a relative localization method that estimates the coordinate frame transformation between two devices based on distance measurements. We present a linear algorithm that calculates the relative pose in 2D or 3D with four degrees of freedom (4-DOF). This algorithm needs a minimum of five or six distance measurements, respectively, to estimate the relative pose uniquely. We use the linear algorithm in conjunction with outlier detection algorithms and as a good initial estimate for iterative least squares refinement. The proposed method outperforms other related linear methods in terms of distance measurements needed and in terms of accuracy. In comparison with a related linear algorithm in 2D, we can reduce 10% of the translation error. In contrast to the more general 6-DOF linear algorithm, our 4-DOF method reduces the minimum distances needed from ten to six and the rotation error by a factor of four at the standard deviation of our ultra-wideband (UWB) transponders. When using the same amount of measurements the orientation error and translation error are approximately reduced to a factor of ten. We validate our method with simulations and an experimental setup, where we integrate ultra-wideband (UWB) technology into simultaneous localization and mapping (SLAM)-based devices. The presented relative pose estimation method is intended for use in augmented reality applications for cooperative localization with head-mounted displays. We foresee practical use cases of this method in cooperative SLAM, where map merging is performed in the most proactive manner.


Author(s):  
CHENGGUANG ZHU ◽  
zhongpai Gao ◽  
Jiankang Zhao ◽  
Haihui Long ◽  
Chuanqi Liu

Abstract The relative pose estimation of a space noncooperative target is an attractive yet challenging task due to the complexity of the target background and illumination, and the lack of a priori knowledge. Unfortunately, these negative factors have a grave impact on the estimation accuracy and the robustness of filter algorithms. In response, this paper proposes a novel filter algorithm to estimate the relative pose to improve the robustness based on a stereovision system. First, to obtain a coarse relative pose, the weighted total least squares (WTLS) algorithm is adopted to estimate the relative pose based on several feature points. The resulting relative pose is fed into the subsequent filter scheme as observation quantities. Second, the classic Bayes filter is exploited to estimate the relative state except for moment-of-inertia ratios. Additionally, the one-step prediction results are used as feedback for WTLS initialization. The proposed algorithm successfully eliminates the dependency on continuous tracking of several fixed points. Finally, comparison experiments demonstrate that the proposed algorithm presents a better performance in terms of robustness and convergence time.


2018 ◽  
Vol 3 (4) ◽  
pp. 2770-2777 ◽  
Author(s):  
Lucas Teixeira ◽  
Fabiola Maffra ◽  
Marco Moos ◽  
Margarita Chli

IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 196979-196991
Author(s):  
Ruican Xia ◽  
Hailong Pei

Sign in / Sign up

Export Citation Format

Share Document